MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Classic Mustangs (http://forums.mustangworks.com/forumdisplay.php?f=10)
-   -   Looking for limited slip or posi carrage for my 8 inch (http://forums.mustangworks.com/showthread.php?t=48496)

Blue68Coupe 06-07-2006 11:39 AM

Looking for limited slip or posi carrage for my 8 inch
 
Does anyone know what cars came with a limited slip or posi 8 inch rear end? I am looking to swap out my open diff in my 68 Coupe.

My65Stang 06-07-2006 12:09 PM

Re: Looking for limited slip or posi carrage for my 8 inch
 
I plan to do the same thing to my '65 (someday). For what it's worth, I found this...

Auburn makes a limited slip unit for the 8 inch ford for $462.40 + freight. Powertrax also makes the Lock Right that fits inside of your existing standard open case for $261.47 + freight

I haven't checked into any yet, that post may be old.

Rev 06-07-2006 07:32 PM

Re: Looking for limited slip or posi carrage for my 8 inch
 
I bought an Auburn Pro a year or so ago for my 8". It has worked well for that time with no problems and occasional hard use. I also considered the Power-Trax, but was advised against it by the local rear end shop that I occasionally do business with. I paid $389 + shipping from a place on the internet. You will need new bearings pressed on to the carrier (another $35 from a local shop) . The only down side to the Auburn Pro is that they are not rebuildable. Aubrn does give a one year guarantee and a five year exchage for about $150 should the unit fail.

Mine's been great and I do recommend it. Not much else really available for the 8" besides the Ford TractionLck and that Power-Trax. As a side note, I was able to install the unit myself with good result. The only tricky part is to be sure to get the preload and the lash set correctly.

Rev


All times are GMT -5. The time now is 08:46 PM.