need info on swapping master cylinder

teresa · 03-15-2005, 09:42 PM

I have a 66 mustang and I am changing the master cylinder over from single to dual. I have purchased a 67 mustang m/c and I am wondering if I need a distribution block and also if the push rod will be the right size or if i need to use a different one i have manual drum brakes all around and I do not plan on converting them at this time. And I am also wondering about the brake lines and how they are to be rerouted into the new m/c. any help is greatly appreciated.

Ron1 · 03-17-2005, 02:31 AM

If you use a 74 Maverick M/C you can use the existing distribution block. Direct bolt in, very easy swap. I did mine in an afternoon using the Wilwood kit, that slip over the existing spindles. Companies like www.greensalescompany.com usually have the M/C's available. Also check here http://www.mustangsteve.com/ I picked my M/C up from Steve.

Ron

03-15-2005, 09:42 PM	#1
teresa Registered Member Join Date: Mar 2005 Location: mission Posts: 17	need info on swapping master cylinder I have a 66 mustang and I am changing the master cylinder over from single to dual. I have purchased a 67 mustang m/c and I am wondering if I need a distribution block and also if the push rod will be the right size or if i need to use a different one i have manual drum brakes all around and I do not plan on converting them at this time. And I am also wondering about the brake lines and how they are to be rerouted into the new m/c. any help is greatly appreciated.

03-17-2005, 02:31 AM	#2
Ron1 Registered Member Join Date: Sep 1999 Location: Vancouver, WA USA Posts: 439	Re: need info on swapping master cylinder If you use a 74 Maverick M/C you can use the existing distribution block. Direct bolt in, very easy swap. I did mine in an afternoon using the Wilwood kit, that slip over the existing spindles. Companies like www.greensalescompany.com usually have the M/C's available. Also check here http://www.mustangsteve.com/ I picked my M/C up from Steve. Ron __________________ 65 Mustang Fastback 347 Stroker, C4 with 4.56 10.68 @ 122 N/A 9.74 @ 137 w/ N2O www.fastspecialties.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Brake Question (Master Cylinder)	zach0	Classic Mustangs	2	02-19-2003 04:04 AM
master cylinder and prop valve question	shelby2	Classic Mustangs	1	07-05-2002 05:32 PM
master cylinder?	Fostang	Classic Mustangs	0	06-10-2002 01:04 AM
Master Cylinder	Sneaky	Windsor Power	3	03-06-2002 12:13 PM
Looking for a master cylinder...?	k. putman	Windsor Power	0	02-03-2002 07:12 PM