302 Measurements?

Drew_ed · 03-24-2002, 05:48 PM

where can I find Ford 5.0 engine measurements, plans, drafting's, etc on the net? I just need basic measurements like the distance between heads head angles of the heads, intake measurements, so I can build a custom lower intake from my 302 EFI motor. Please summit links to sites if you can. I do not have a spare motor to take measurements from, and can not take apart my daily driver just to get measurements. I know some one out there has compiled this data, if Ford is not willing to release it. any help is appreciated**thanks.....Drew

Ponycar_302 · 03-24-2002, 06:08 PM

Try some of these. I didn't have the time to really read them, but they look promising.

http://www.nhra.com/tech_specs/engine/

http://www.jason.fletcher.net/tech/tech.htm

http://www.fleet.ford.com/products/s...les/letter.asp

http://homepages.ihug.co.nz/~don_s/carsbymake3.htm

03-24-2002, 05:48 PM	#1
Drew_ed Registered Member Join Date: Mar 2002 Location: Columbus Ohio Posts: 6	302 Measurements? where can I find Ford 5.0 engine measurements, plans, drafting's, etc on the net? I just need basic measurements like the distance between heads head angles of the heads, intake measurements, so I can build a custom lower intake from my 302 EFI motor. Please summit links to sites if you can. I do not have a spare motor to take measurements from, and can not take apart my daily driver just to get measurements. I know some one out there has compiled this data, if Ford is not willing to release it. any help is appreciated**thanks.....Drew

03-24-2002, 06:08 PM	#2
Ponycar_302 Registered Member Join Date: Feb 2002 Location: Pennsylvania Posts: 120	Try some of these. I didn't have the time to really read them, but they look promising. http://www.nhra.com/tech_specs/engine/ http://www.jason.fletcher.net/tech/tech.htm http://www.fleet.ford.com/products/s...les/letter.asp http://homepages.ihug.co.nz/~don_s/carsbymake3.htm __________________ I'm sofa king we tall did.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1966 Ford Mustang Frame Measurements	bigmac5300	Classic Mustangs	6	10-25-2009 01:15 PM
Piston to bore measurements	zach0	Classic Mustangs	1	01-26-2003 04:03 PM
does anyone know the measurements for a 5sp flywheel??	ragtop5point0	Windsor Power	1	10-01-2002 04:18 PM
Need someone with an 87-93 Coupe to get me some measurements	2FastLX	Windsor Power	12	03-20-2002 11:26 AM
Going To Make A Driveshaft Safty Loop... Need Measurements Please	BowTie Eater 5 Liter	Windsor Power	2	01-29-2002 11:08 AM