Need some Help on C4-T5 Swap... Please guys!

Skyman · 01-04-2001, 04:31 AM

Were going to try and swap a T-5 in to my cousins 68 mustang.

It has a brand new 5.0L ford crate engine in it right now. Hooked to the old C4.

I have a guy who is going to sell me...

T-5
flywheel
a clutch kit with the pressure plate
throughout bearing
adjustable cable
a bell housing
drive shaft
and pedals

these are all outta a foxbody stang

what else will I need, what wouldnt work.

Help me please guys, Im ignorant!

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shorty headers, Offroad-Hpipe, 2chamber flows, 36psi FPR, playing with timing still, 70mm tb, 73mm maf, 24lb injectors, K/N, March Crank pulley, MSD6a, 9mm wires and FMS Aluminum driveshaft.
Best ET 13.2@106mph Needs tuning...

01-04-2001, 10:15 AM

I know you need a special transmission mount.

------------------
67 Fastback - Arctic White Pearl paint
351W ,Trick Flow Alum. Heads, C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars.

My 351W Fastback

01-04-2001, 10:18 AM

Go to this link and click on frequently asked questions. There is a section about swapping a T5 into an early stang.
Let us know how it goes, I want to do a T5 in my 67

------------------
67 Fastback - Arctic White Pearl paint
351W ,Trick Flow Alum. Heads, C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars.

My 351W Fastback

01-04-2001, 10:20 AM

OK I am stupid, here is the link
http://www.windsor-fox.com

------------------
67 Fastback - Arctic White Pearl paint
351W ,Trick Flow Alum. Heads, C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars.

My 351W Fastback

red · 01-04-2001, 05:04 PM

T5 swap INFO

Tom351 · 01-04-2001, 05:05 PM

red's link is better than mine

------------------
67 Fastback - Arctic White Pearl paint
351W ,Trick Flow Aluminum Heads, Edelbrock TorkerII, Comp. Cam, Performance Automatic C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars.

My 351W Fastback

David Fulford · 01-09-2001, 10:53 AM

Buy the suggested cross member from windsor fox. It worked well in my 69. There were also 2 other parts that were used, but I can't remember exactly what they were called on the windsor fox website.

01-04-2001, 04:31 AM	#1
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Need some Help on C4-T5 Swap... Please guys! Were going to try and swap a T-5 in to my cousins 68 mustang. It has a brand new 5.0L ford crate engine in it right now. Hooked to the old C4. I have a guy who is going to sell me... T-5 flywheel a clutch kit with the pressure plate throughout bearing adjustable cable a bell housing drive shaft and pedals these are all outta a foxbody stang what else will I need, what wouldnt work. Help me please guys, Im ignorant! Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shorty headers, Offroad-Hpipe, 2chamber flows, 36psi FPR, playing with timing still, 70mm tb, 73mm maf, 24lb injectors, K/N, March Crank pulley, MSD6a, 9mm wires and FMS Aluminum driveshaft. Best ET 13.2@106mph Needs tuning...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
week top end after pi swap.	Z28EATR	Modular Madness	0	09-23-2003 08:40 AM
falcon engine swap	PEPE	Windsor Power	5	09-11-2003 08:44 PM
Edel. non-smog to AFR smog legal heads? What do you guys think?	Simi Stang	Windsor Power	10	06-19-2003 11:14 PM
Import guys are making fun of us...take a look	yelowjaket	Blue Oval Lounge	12	02-14-2003 11:33 PM
Cobra Engine Swap...Ways to improve my 98 GT...	xtrememach1racer	Modular Madness	3	10-31-2002 11:23 AM

01-04-2001, 10:15 AM	#2
tom351 Guest Posts: n/a	I know you need a special transmission mount. ------------------ 67 Fastback - Arctic White Pearl paint 351W ,Trick Flow Alum. Heads, C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars. My 351W Fastback

01-04-2001, 10:18 AM	#3
tom351 Guest Posts: n/a	Go to this link and click on frequently asked questions. There is a section about swapping a T5 into an early stang. Let us know how it goes, I want to do a T5 in my 67 ------------------ 67 Fastback - Arctic White Pearl paint 351W ,Trick Flow Alum. Heads, C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars. My 351W Fastback

01-04-2001, 10:20 AM	#4
tom351 Guest Posts: n/a	OK I am stupid, here is the link http://www.windsor-fox.com ------------------ 67 Fastback - Arctic White Pearl paint 351W ,Trick Flow Alum. Heads, C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars. My 351W Fastback

01-04-2001, 05:04 PM	#5
red Registered Member Join Date: Sep 1998 Location: Millburn, NJ Posts: 310	T5 swap INFO

01-04-2001, 05:05 PM	#6
Tom351 Registered Member Join Date: Oct 2000 Location: Atlanta,GA,USA Posts: 278	red's link is better than mine ------------------ 67 Fastback - Arctic White Pearl paint 351W ,Trick Flow Aluminum Heads, Edelbrock TorkerII, Comp. Cam, Performance Automatic C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars. My 351W Fastback

01-09-2001, 10:53 AM	#7
David Fulford Registered Member Join Date: Oct 2000 Location: Charlotte NC Posts: 193	Buy the suggested cross member from windsor fox. It worked well in my 69. There were also 2 other parts that were used, but I can't remember exactly what they were called on the windsor fox website.