MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Classic Mustangs (http://forums.mustangworks.com/forumdisplay.php?f=10)
-   -   popping through the carb (http://forums.mustangworks.com/showthread.php?t=8408)

gofastmercury 05-18-2001 11:59 PM

popping through the carb
 
My 351w in a 66 comet has developed a really bad popping noise when I rev it up. It has a really big solid cam,70 351w heads,vic jr, and a 700 holley. it is a new cam, but it replaced a even bigger roller.I have run the valves.

Dark Knight 05-19-2001 03:13 AM

well, if one of the exhaust rockers isnt loose, check the timing... maybe 180* off... or even 1 tooth...

------------------
84 convt,'95 302,AFR's, performer
3.55's, underdrives stock shorties
stock cam, 1.7's
14.06@100.21, 255RWHP on a hot day
265 on the mph/weight chart


Dark Knight 05-19-2001 03:15 AM

oh yeah... which firing order are you running?

------------------
84 convt,'95 302,AFR's, performer
3.55's, underdrives stock shorties
stock cam, 1.7's
14.06@100.21, 255RWHP on a hot day
265 on the mph/weight chart


les1 05-19-2001 11:38 AM

could be fuel mixture,bad plug or wire or im sure youve checked timing, i do know that if its 180 out on the distributor it wont run at all and if your running wrong firing order same thing, but it could be because you never said if it runs if it pops through the carb when trying to start and pops but wont start then it is 180 out or wrong order.

j's69stang 05-19-2001 11:43 AM

i had a popping noise coming through my carb and i snapped a rocker arm in half so take the valve covers off and see what you got

gofastmercury 05-19-2001 11:54 AM

I've pulled the valve covers checked the lash, it starts and idles fine. i've tried a difffent carb and it does the same thing.

gofastmercury 05-19-2001 04:04 PM

when ajusted the same rocker for the second time, I stared to look at it. the new cam went flat on 2 lobes. I guess the roller going back in.

Dark Knight 05-20-2001 12:59 AM

what kind of heads? if they're the press in stud type, you could be pulling a stud out of the head.... if one of the exhaust valves is getting loose, it will backfire thru the carb all the time.. if it only does it when you give it gas, it sounds like it's a tooth off in the Dist.... try re-checking the timing...

------------------
84 convt,'95 302,AFR's, performer
3.55's, underdrives stock shorties
stock cam, 1.7's
14.06@100.21, 255RWHP on a hot day
265 on the mph/weight chart


Dark Knight 05-20-2001 01:01 AM

another thing to check might be the acc. pump on the carb... might not be getting enough fuel when you open the throttle..

------------------
84 convt,'95 302,AFR's, performer
3.55's, underdrives stock shorties
stock cam, 1.7's
14.06@100.21, 255RWHP on a hot day
265 on the mph/weight chart


gofastmercury 05-21-2001 11:07 PM

thanks for all your help. I put the roller in and it runs as good as new. took it to the track and in the 12's right off the trailer.lost in the 2nd round with a .479 and a dead-on dail.


All times are GMT -5. The time now is 09:17 AM.