Power Rack & Pinion for Classic Ponys

67 Ponyracer · 05-24-1999, 07:01 PM

I've been checking around for a power
rack and pinion kit or blueprint of required
brackets and parts, for my 67 Stang. I have
a mig welder but I'm not real confident in
the design and fabrication department. The
only thing I've found that I like, so far,
is Total Control's kit. At $1600 I wouldn't
have anything left for the rest of the car!
Was hoping someone might know of a kit that
was cheaper. Perhaps a kit that only supplies
brackets and shaft joints, etc. and you get
your rack & pinion elsewhere.(of the type
specified of course) Any suggestions? Thanks!

------------------
67 Ponyracer

Fettstang · 05-28-1999, 10:29 PM

Check all the mustang and super ford mags for ads, I've seen those kits in them frequently.

------------------
1989GT,373grs, B&M 2500Stall, shft kt organic clutches and Kevlar band. Turbo mufflers.
66GT350 conv replica, 351w,C4, B&M stall, shift kit and clutches. 9" detoit locker. turbo mufflers.

05-24-1999, 07:01 PM	#1
67 Ponyracer Registered Member Join Date: May 1999 Location: Edgewater Park, NJ Posts: 1	Power Rack & Pinion for Classic Ponys I've been checking around for a power rack and pinion kit or blueprint of required brackets and parts, for my 67 Stang. I have a mig welder but I'm not real confident in the design and fabrication department. The only thing I've found that I like, so far, is Total Control's kit. At $1600 I wouldn't have anything left for the rest of the car! Was hoping someone might know of a kit that was cheaper. Perhaps a kit that only supplies brackets and shaft joints, etc. and you get your rack & pinion elsewhere.(of the type specified of course) Any suggestions? Thanks! ------------------ 67 Ponyracer

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rack & Pinion or Stock steering for '67	Yellow67GTA	Classic Mustangs	0	09-30-2002 10:04 PM
Rack and pinion conversion	Yellow67GTA	Classic Mustangs	7	08-06-2002 03:24 PM
Power Steering rack is TOAST!?!?!	Mustangbelle306	Windsor Power	9	03-28-2002 02:55 AM
Power to Manual Rack Question	BoveK	Windsor Power	1	08-18-2001 01:33 PM
Stock power rack to manual rack???	Rick 91GT	Windsor Power	4	02-14-2001 03:04 PM

05-28-1999, 10:29 PM	#2
Fettstang Registered Member Join Date: Feb 1999 Location: Huntington,IN USA Posts: 30	Check all the mustang and super ford mags for ads, I've seen those kits in them frequently. ------------------ 1989GT,373grs, B&M 2500Stall, shft kt organic clutches and Kevlar band. Turbo mufflers. 66GT350 conv replica, 351w,C4, B&M stall, shift kit and clutches. 9" detoit locker. turbo mufflers.