68 mustang weight
 

What would a 1968 mustang coupe w/ C4 and aluminum headed 302 weight?

Skyler

------------------
1989 Saleen #406, TFS Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 1 5/8 Mac, 2.5" Off road H, 2 Chambers, 3.73 gears, MSD6a, elec fan, March 5.0 Ram air, March Pulleys, Alum driveshaft, 190lph pump, 24lb injectors set to 48Psi, 18degress timing on 87 octane! 225/50/16 tires and racecraft suspension.

Best ET 13.50@105.41mph

around 3000,

------------------
84 convt,'95 302, performer
3.55's, underdrives shorties
and a '68 stang that WAS nasty ;-)
MY ride

Sky, my '66 coupe with 1/2 tank of gas, 302, C-4, full interior, iron heads, al intake, al water pump, no A.C., and no lard *** driver, weighs 3020 lbs., certified scales. A '68 probably weighs 200 lbs. more. My $.02.

Rev


------------------
'66 Coupe, 306, windage
tray, TRW flat tops, 351W
heads,pocket ported, 268
CC hydraulic cam, R tip
R's, Edelbrock Performer,
600 CFM Holley vac. secs.,
Mallory Unilite, coil, fuel
pump, Tri-Y headers, 2 1/2 "
custom pipes, 3 chamber
Flows, stock C-4, 3.25
Currie built 8" rear
and whatever else I
forgot. 14.17 e.t., 97 mph
1/4 mi.

According to the Ford specs, the hardtop was 2635, the conv. was 2745 and the FB was 2654 with the 6 Cyl. The smallblock V8's were HT at 2906, FB at 2950 and the conv. was 3016.

So with your average driver add 200 and youve got it.

Ron

[This message has been edited by Ron1 (edited 01-29-2000).]