autozones rack and pinion any good

richie · 08-24-2001, 08:42 PM

My steering rack has been freezing up lately and the car wanders on the freeway.I want to stay with a powersteering rack but I want slightly stiffer steering.Are any of the local parts stores racks any good?I don't want to break the bank.

84_GT350 · 08-24-2001, 10:40 PM

The Autozone part is probably just a remanufactered/rebuilt Ford rack. I'm not sure if there are any "performance" racks besides the ones that came stock on GTs from '83-on. Some shops that can mess with the gear box on your rack to make it turn easier/quicker. A shop did it to my car. Probably not cheap...but effective.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

So I pushed it up to 110,
That flathead motor was about to give in,
I crossed my fingers and prayed to the lord,
Don't let me down you fuct up ford!"

"5-Oh Ford" by The Reverend Horton Heat

macx · 08-24-2001, 11:16 PM

A place in Iowa called Northern Auto Parts
(if I remember correctly) had pretty good deals on racks - I think they have a website. They're a rapidly growing stock & hp parts outfit and you can register to get their free periodic catalogues.

GodStang · 08-24-2001, 11:30 PM

Just put that one in my mustang. It is remanufactured. Works great. IT was like $99.

AB89GT · 08-25-2001, 10:15 AM

Is the steering rack a common problem for mustangs? My steering binds up if you turn too quickly. It is always stiff cause when I drove my buddies stang, the difference was like night and day. Could this be a bad rack??

[This message has been edited by AB89GT (edited 08-25-2001).]

richie · 08-25-2001, 10:39 AM

On Autozones web site they have two racks they sell.One is $99.00 and the other is called sport rack which they say is stiffer than the other rack they sell and it sells for 129.00.Does anybody know where I can get a new factory rack?

Unit 5302 · 08-25-2001, 01:40 PM

Quote:

Originally posted by AB89GT:
[B]Is the steering rack a common problem for mustangs... Could this be a bad rack??[B]

Yes it is, and yes it could. It could also be your power steering pump. The racks that have gone bad that I've seen usually get sticky, especially when you are turning in one direct. Sticks when you are turning left, or it's hard to turn right etc.

Ford built some of the racks out of aluminum. If they would have made them out of steel, the problem wouldn't be a big deal.

08-24-2001, 08:42 PM	#1
richie Registered Member Join Date: Apr 2001 Posts: 47	autozones rack and pinion any good My steering rack has been freezing up lately and the car wanders on the freeway.I want to stay with a powersteering rack but I want slightly stiffer steering.Are any of the local parts stores racks any good?I don't want to break the bank.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rack and pinion	schizcat	Windsor Power	1	12-15-2003 07:26 AM
Rack & Pinion bushing rplcmnt?????	johnmcgt	Windsor Power	9	10-08-2002 07:34 PM
Rack and pinion conversion	Yellow67GTA	Classic Mustangs	7	08-06-2002 03:24 PM
Rack & Pinion	Chris_H	Windsor Power	4	10-09-2001 03:13 PM
Power Rack & Pinion for Classic Ponys	67 Ponyracer	Classic Mustangs	1	05-28-1999 10:29 PM

08-24-2001, 10:40 PM	#2
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	The Autozone part is probably just a remanufactered/rebuilt Ford rack. I'm not sure if there are any "performance" racks besides the ones that came stock on GTs from '83-on. Some shops that can mess with the gear box on your rack to make it turn easier/quicker. A shop did it to my car. Probably not cheap...but effective. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s So I pushed it up to 110, That flathead motor was about to give in, I crossed my fingers and prayed to the lord, Don't let me down you fuct up ford!" "5-Oh Ford" by The Reverend Horton Heat

08-24-2001, 11:16 PM	#3
macx Registered Member Join Date: Oct 1999 Location: Gordonville MO USA Posts: 448	A place in Iowa called Northern Auto Parts (if I remember correctly) had pretty good deals on racks - I think they have a website. They're a rapidly growing stock & hp parts outfit and you can register to get their free periodic catalogues.

08-24-2001, 11:30 PM	#4
GodStang College Stanger Join Date: May 1999 Location: Aiken,south carolina, usa Posts: 1,097	Just put that one in my mustang. It is remanufactured. Works great. IT was like $99.

08-25-2001, 10:15 AM	#5
AB89GT Registered Member Join Date: Nov 2000 Location: Rockville, MD Posts: 49	Is the steering rack a common problem for mustangs? My steering binds up if you turn too quickly. It is always stiff cause when I drove my buddies stang, the difference was like night and day. Could this be a bad rack?? [This message has been edited by AB89GT (edited 08-25-2001).]

08-25-2001, 10:39 AM	#6
richie Registered Member Join Date: Apr 2001 Posts: 47	On Autozones web site they have two racks they sell.One is $99.00 and the other is called sport rack which they say is stiffer than the other rack they sell and it sells for 129.00.Does anybody know where I can get a new factory rack?