66 Conv. 289 to 351
Ok, I am getting near finally and I know I can put a 302 in place of the 289 but what would it take to put the 351W in their. I know the 351 has width of 1 1/4 inches wider on each side. Am I going to have a problem finding headers to fit in their or what. This is my first conversion and I understand the motor mounts and the C-4 will mount with no problems if I heard right. Any help would be much appreciated.
351W or 351C which would be better.
__________________
1980 RX7 with 289 Ford V-8 bored .030 over, Very radical cam, Torker 2 high rise intake, Holley 650 Carb, MSD Nascar 6ALN ignition, MSD coil and distributor, Headers with dual open side exhaust. Over 300 horse.
1966 Mustang still in progress
|