View Single Post
Old 01-25-2005, 09:04 PM   #2
Phillyfanfrombirth
Registered Member
 
Phillyfanfrombirth's Avatar
 
Join Date: Dec 2004
Location: South Central PA
Posts: 358
Default Re: high rise vs. low rise

It's all in the RPM bands...

You need to know how you want to drive the car... and what mods you want to do to it.

If you want an everyday driver, without huge mods... a Performer (dual plane regular height... idle to 5500 RPM) and a 600 cfm or SMALLER is the way to go. A Performer RPM (dual plane higher height) moves that band up by 1000 RPMs... 1500 - 6500 RPMs, again, I wouldn't go with anything bigger than a 600 cfm with that either, unless you are doing a lot more, which it doesn't sound like.

I think that the Performer RPMs are alright on height, but anything taller will probably require either a low profile air cleaner, or a hood modification.

As far as the engine... while you have it apart... play dressup!!! simple things like cleaning and painting the water pump, fan, radiator spacer and all the areas that you can get to while it is in the car... clean up the wiring, to... may as well. New hoses belt(s) may as well be replaced while you're at it.


If you are really looking for potential problems... and don't mind the money... check out the suspension, brakes, frame rails, and floor boards...
Phillyfanfrombirth is offline   Reply With Quote