MustangWorks.com : Ford Forums - View Single Post

Hitman73 · 06-02-2005, 09:30 PM

The car is not stock but i have no idea what pistons, cam, ect. are in it the car is real lopey at idle. The gears are 4.11's 9 inch rear the stall is not very high i would guess stock, the car has headers, MSD ignition 6AL 6420 version, MSD billet distributor PN 8580, MSD Blaster 2 coil, 4v heads.

The car is now running poorly after a mile or two it dies and acts like it is not getting gas?. It has been running like this for 3-4 days the accelerator Pump Discharge Nozzles are not getting gas?. If i move the throttle linkage it pumps gas to it after a couple of pulls then runs fine for a few miles then the same thing?.

06-02-2005, 09:30 PM	#9
Hitman73 Registered Member Join Date: Feb 2005 Location: Omak Wa. Posts: 24	Re: Holley Carb The car is not stock but i have no idea what pistons, cam, ect. are in it the car is real lopey at idle. The gears are 4.11's 9 inch rear the stall is not very high i would guess stock, the car has headers, MSD ignition 6AL 6420 version, MSD billet distributor PN 8580, MSD Blaster 2 coil, 4v heads. The car is now running poorly after a mile or two it dies and acts like it is not getting gas?. It has been running like this for 3-4 days the accelerator Pump Discharge Nozzles are not getting gas?. If i move the throttle linkage it pumps gas to it after a couple of pulls then runs fine for a few miles then the same thing?.