[Kisner]

It's also been way too long since I did mine too, but if I remember correctly, I had to remove the window stops (one on each side) and that allows the window to go higher and then you can remove (or insert) the rollers back in the tracks. To remove the window stop closest to the front of the car, you'll have to roll the window up or down so it'll be visible through the small round cutout. For the one near the door jam, I believe I had to remove the rubber cover (or whatever you technically call it) at the top inside of the door and you'll see the bolt holding it in. Keep in mind the one near the front of the car is a royal pain in the butt to put back in.