347 JE SRP Pistons For Sale

Idhomustang · 01-06-2002, 11:23 PM

Oops!

I placed a order with Probe and it took them quiet a while to fill the order, so I ordered another set of Pistons, from another company they shipped next day, now as you might have quessed I have to complete sets.
They are 4.030 bore, with 1.10 pin location and are for .927 pins new in orginal box. They are good for 5.315 or 5.4 rods, with a 3.40" crank.

I will pay shipping if you would like to pay what I have into they at this point.

$440.00 cash/ cashiers check ok, certified check ok, no CODs.

Mac..

red · 01-07-2002, 07:46 PM

Post belongs in the Classifieds section!

-red

01-06-2002, 11:23 PM	#1
Idhomustang Registered Member Join Date: Sep 1999 Location: boise,idaho Posts: 220	347 JE SRP Pistons For Sale Oops! I placed a order with Probe and it took them quiet a while to fill the order, so I ordered another set of Pistons, from another company they shipped next day, now as you might have quessed I have to complete sets. They are 4.030 bore, with 1.10 pin location and are for .927 pins new in orginal box. They are good for 5.315 or 5.4 rods, with a 3.40" crank. I will pay shipping if you would like to pay what I have into they at this point. $440.00 cash/ cashiers check ok, certified check ok, no CODs. Mac.. __________________ 393,9.5" 351W,830 Holley,Victor Jr,Home made Cool Air Pan, Pro Billet MSD, MSD 6AL, XE 284H Xtr-Com cam, 240-246 @.050, 540-544, M/T Et streets, Mac Upper and Lower, Control Arms, 3:73 US Gear,Mini Spool, Eagle Long rods, Mac Windage tray, KB Pistons, Scat crank, 4000 rpm stall convertor, C-4 trans, Airflow Research 185cc, Hooker long tubes 3", exhaust, S&W 6 point roll cage, 11.2 at 121 mph.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
393 pistons	Ieatcamaros	Windsor Power	0	03-24-2004 10:02 PM
Largest cam in 351W without cutting the pistons (Looking at AFR185s)	Fox Body	Windsor Power	10	06-15-2003 12:39 AM
Cutting valve reliefs into early pistons	QuantumMotorsports	Windsor Power	11	05-14-2003 09:22 PM
Pistons for Larger Valves?	MustangChile	Classic Mustangs	4	02-28-2003 01:27 AM
What type of pistons should i get? :)	chickendreamer	Windsor Power	14	09-12-2002 09:52 PM

01-07-2002, 07:46 PM	#2
red Registered Member Join Date: Sep 1998 Location: Millburn, NJ Posts: 310	Post belongs in the Classifieds section! -red