Exhaust Manifold

Lou Lyman · 02-23-2000, 07:07 PM

Does anyone know if 351W exhaust manifolds will fit into a 1966 coupe (289/C4)? I know they will bolt up but will they physically clear? Exhaust pipes can be rerouted if necessary. What is the flow advantage and is it worth the trouble? I know a lot of you will suggest headers but I hear a lot of stories about leaks. Any info or advice is appreciated. Thanks.
Lou

Clark Rodgers · 02-25-2000, 09:04 AM

Lou,
I have a 351W in my 69 and the exhaust manifolds are better than the 289 log style but I would go with the shorty headers. I am with you about leaks that's why I won't put the long style headers in mine. The shorty style are alot better and usually do not leak. There are quite a few makers of this style just watch out for hedman they tend to last just a few years.

------------------
69 351W Sportsroof deluxe

Lou Lyman · 02-28-2000, 11:51 AM

Thanks Clark. I'll consider your suggestion regarding shorty headers.
Lou

Quik 64 1/2 · 02-28-2000, 10:15 PM

I got a 64 1/2 with a 289. I put Tri Y headers on mine and they won't leak just as long as you stay away from the paper gaskets. When installing them, you must loosen on side of the motor mounts in order to clear the wall. I can't remember which side though. It's your stang so the decision is up to you.

02-23-2000, 07:07 PM	#1
Lou Lyman Registered Member Join Date: Dec 1998 Location: Tampa, FL Posts: 70	Exhaust Manifold Does anyone know if 351W exhaust manifolds will fit into a 1966 coupe (289/C4)? I know they will bolt up but will they physically clear? Exhaust pipes can be rerouted if necessary. What is the flow advantage and is it worth the trouble? I know a lot of you will suggest headers but I hear a lot of stories about leaks. Any info or advice is appreciated. Thanks. Lou

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speed Secret # 4	jim_howard_pdx	Windsor Power	13	11-10-2002 03:42 PM
Speed Secret # 3	jim_howard_pdx	Windsor Power	13	11-09-2002 10:35 AM
Header gaskets	Stang951	Windsor Power	18	11-01-2002 05:57 PM
Exhaust Manifold	DanielC	Classic Mustangs	4	12-08-1999 09:04 PM
2.3L used exhaust manifold	mustfreak	Small Ponies	0	04-06-1999 08:27 PM

02-25-2000, 09:04 AM	#2
Clark Rodgers Registered Member Join Date: May 1999 Location: Rowlett,Texas Posts: 306	Lou, I have a 351W in my 69 and the exhaust manifolds are better than the 289 log style but I would go with the shorty headers. I am with you about leaks that's why I won't put the long style headers in mine. The shorty style are alot better and usually do not leak. There are quite a few makers of this style just watch out for hedman they tend to last just a few years. ------------------ 69 351W Sportsroof deluxe

02-28-2000, 11:51 AM	#3
Lou Lyman Registered Member Join Date: Dec 1998 Location: Tampa, FL Posts: 70	Thanks Clark. I'll consider your suggestion regarding shorty headers. Lou

02-28-2000, 10:15 PM	#4
Quik 64 1/2 Registered Member Join Date: Feb 2000 Location: Tampa Florida Posts: 50	I got a 64 1/2 with a 289. I put Tri Y headers on mine and they won't leak just as long as you stay away from the paper gaskets. When installing them, you must loosen on side of the motor mounts in order to clear the wall. I can't remember which side though. It's your stang so the decision is up to you.