70 Mach I light bucket

manatee91 · 04-02-2003, 07:11 PM

Where can I find a light bucket for the passenger side of a 1970 Mach I. The one I have is torn and I have been told that they are not repairable. Is that true.

Thanks

hobgoblin351 · 04-19-2003, 07:30 AM

There are many places that part out old stangs. And the prices vary greatly! One place in Florida wanted as much as 300 for the fender extension I needed. I found a guy within driving distance, who wanted only $65 and that was with the headlight bucket too! Try Glaziers Mustang Barn, they're in Penn. I've had good luck with them and they are middle of the road as far as price. There is a guy in the Caralina I also deal with, I'll see if I cant find his number, but, I'm in the middle of moving and things are scattered. Good luck

manatee91 · 04-19-2003, 08:15 AM

gofastmercury · 04-20-2003, 04:10 PM

Always try e-bay, they have it all.

manatee91 · 04-20-2003, 06:52 PM

and need another for the same passenger side on the other car!

Thanks guys, gals?

04-02-2003, 07:11 PM	#1
manatee91 Registered Member Join Date: Feb 2003 Location: Nashville, Tn Posts: 22	70 Mach I light bucket Where can I find a light bucket for the passenger side of a 1970 Mach I. The one I have is torn and I have been told that they are not repairable. Is that true. Thanks

04-19-2003, 07:30 AM	#2
hobgoblin351 Registered Member Join Date: Sep 2002 Location: NYC Posts: 245	There are many places that part out old stangs. And the prices vary greatly! One place in Florida wanted as much as 300 for the fender extension I needed. I found a guy within driving distance, who wanted only $65 and that was with the headlight bucket too! Try Glaziers Mustang Barn, they're in Penn. I've had good luck with them and they are middle of the road as far as price. There is a guy in the Caralina I also deal with, I'll see if I cant find his number, but, I'm in the middle of moving and things are scattered. Good luck __________________ 1970 Stang Conv: en:Boss351 (balanced/blueprinted) mech cam(240*@.050/.540 lift) Scrw in studs/comp cams rllr rkr Mldn valves 2.19in 1.71ex ported polished cc'd hrdnd ex Keith Black FT pistons(10.25/1) Weiand Excellorator manifold Holley700 DP mech 2nds MSD 6 box and Dis Headers/2 1/2 inch duels tr: modified FMX re:9-inch/3.89 limited slip

04-19-2003, 08:15 AM	#3
manatee91 Registered Member Join Date: Feb 2003 Location: Nashville, Tn Posts: 22	THANKS! cvb

04-20-2003, 04:10 PM	#4
gofastmercury Registered Member Join Date: May 2001 Location: calgary alberta canada Posts: 366	Always try e-bay, they have it all. __________________ 93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires. my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250 NEW(oct20/02)14.58@95mph 2.3 60 ft corrects to:13.86@100 66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver 12.3@110 @ 4000ft 1.69 60 ft corrects to:11.69@115

04-20-2003, 06:52 PM	#5
manatee91 Registered Member Join Date: Feb 2003 Location: Nashville, Tn Posts: 22	I am ebayed out! I watch it daily and did purchase one from there and need another for the same passenger side on the other car! Thanks guys, gals?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
head light problem	crazyi	Windsor Power	5	12-17-2003 06:37 PM
Check Engine Light	96GTPRT	Modular Madness	5	05-20-2002 07:48 PM
Emissions related? Check Engine Light	Coupe Devil	Windsor Power	2	05-09-2002 11:49 AM
Dome light will not shut off.	Chris_H	Windsor Power	1	08-30-2001 03:16 PM
73 Mach 1 Tail Light Panel- help!	Gehrkmania	Classic Mustangs	0	04-28-1999 08:34 PM