Spindles for Brake Conversion

Vishnoff · 08-04-2002, 10:49 PM

After learning of the Granada brake conversion I set out to find the parts I need to do the job. I found everything but one part, the most importnant part...the spindles. Does anybody know of any places where I can get some Granada spindles for my brake conversion (preferably in California)?

Fostang · 08-05-2002, 12:54 AM

Junk yard. No one sells them new.

Rev · 08-06-2002, 04:12 PM

I got my whole Granada disk brake swap kit with all new parts except spindles from Jim's Mustang in El Cajon Ca. The spindles were bushed for my Mustang tie rod ends too. I'm betting they would sell the spindles alone.

Rev

08-04-2002, 10:49 PM	#1
Vishnoff Registered Member Join Date: Jun 2002 Location: San Jose Posts: 29	Spindles for Brake Conversion After learning of the Granada brake conversion I set out to find the parts I need to do the job. I found everything but one part, the most importnant part...the spindles. Does anybody know of any places where I can get some Granada spindles for my brake conversion (preferably in California)?

08-05-2002, 12:54 AM	#2
Fostang Registered Member Join Date: Feb 2001 Location: Stockton, Ca Posts: 599	Junk yard. No one sells them new. __________________ 67' Fastback-Supercharged 4.6 DOHC Cobra, T-56, 8.8 more to come. 67' Coupe-EFI, AOD, 8.8 90 Gt-Supercharged,MAF,TB,1.7's ripper, bassani x, 3.55's, 01' cobras, headers. 89'GT-Supercharged,Heads,Cam,Intake,TB,MAF,power pipe,headers,offroad exhaust,black bullits.

08-06-2002, 04:12 PM	#3
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	I got my whole Granada disk brake swap kit with all new parts except spindles from Jim's Mustang in El Cajon Ca. The spindles were bushed for my Mustang tie rod ends too. I'm betting they would sell the spindles alone. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
IFS drop spindles on 65-66?	65modified	Classic Mustangs	15	01-29-2007 06:06 AM
What all do you need to do rear disc conversion w/ SN95 Parts	KG88GT	Windsor Power	1	07-29-2003 01:45 PM
questions about maf conversion	spankaveli	Windsor Power	10	10-19-2002 02:46 PM
4 cyl. spindles vs. V8 spindles	Coupe Devil	Windsor Power	2	02-11-2002 07:12 PM
mass air 87GT conversion	greydan	Windsor Power	3	01-02-2002 07:57 PM