5lug conversion

chatcher · 06-30-2001, 06:58 PM

hi i have a 92 lx that i wish to due a five lug 4 wheel disc conv to any help on directions for install and parts nessasary would be greatly app i thank you for ur time

------------------
92 wannabe saleen

fiveohpatrol · 07-01-2001, 12:36 AM

you'll need lincoln mark VII rotors, not sure about the year though, then you need 2 drivers side axles from 87-92 ford rangers from a junk yard, good luck with it, just please dont put cobra R wheels on it when you do it, way too many people have them now, do something original, good luck

------------------
88 Notch, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air ,MSD coil, U/L control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best 1/4--> 13.77@101.35

chatcher · 07-01-2001, 08:39 AM

thanks i did some searching last night and found a page that deals with switching to the sn95 front spindles which is what i would likr to do also it tells about the rear axle switch but only how to swich to 5lug drums i would perfer disc so i will keep searching oh and the wheels american racing makes a set for the 94& up muscraat that i am interested in they just dont come in four lug thanks

------------------
92 wannabe saleen

trbkrb · 07-02-2001, 08:53 PM

Matt90GT on corral has a lot of info on the swap - check out his webpage : http://svo73mm.cjb.net/

------------------
Basically stock 87 LX 5.0, owned since 3/31/1987. 216,000+ mile daily driver, GT interior, King Cobra clutch, World Class T-5, GT turbine wheels.
Plans: GT hatch & spoiler, rear disk brakes, and a PAINT JOB!

John Cummins · 07-07-2001, 04:57 PM

I just ordered a complete 5 lug front conversion from Mustang Parts Specialty. It comes with 94/95 spindles, hubs, 99/01 GT dual piston calipers and brackets, rotors, dust shields, and brake lines. All for $259. For the rear some guy sold me a stock 94 Cobra axle for $350.00 from disk to disk.

06-30-2001, 06:58 PM	#1
chatcher Registered Member Join Date: Jun 2001 Location: butler pa Posts: 303	5lug conversion hi i have a 92 lx that i wish to due a five lug 4 wheel disc conv to any help on directions for install and parts nessasary would be greatly app i thank you for ur time ------------------ 92 wannabe saleen

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What all do you need to do rear disc conversion w/ SN95 Parts	KG88GT	Windsor Power	1	07-29-2003 01:45 PM
questions about maf conversion	spankaveli	Windsor Power	10	10-19-2002 02:46 PM
4 cylinder to 5.0 conversion	saleen243	Windsor Power	1	01-06-2002 11:51 PM
mass air 87GT conversion	greydan	Windsor Power	3	01-02-2002 07:57 PM
Disc Brake Conversion	RMARIANI	Windsor Power	0	03-30-2001 08:12 AM

07-01-2001, 12:36 AM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	you'll need lincoln mark VII rotors, not sure about the year though, then you need 2 drivers side axles from 87-92 ford rangers from a junk yard, good luck with it, just please dont put cobra R wheels on it when you do it, way too many people have them now, do something original, good luck ------------------ 88 Notch, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air ,MSD coil, U/L control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best 1/4--> 13.77@101.35

07-01-2001, 08:39 AM	#3
chatcher Registered Member Join Date: Jun 2001 Location: butler pa Posts: 303	thanks i did some searching last night and found a page that deals with switching to the sn95 front spindles which is what i would likr to do also it tells about the rear axle switch but only how to swich to 5lug drums i would perfer disc so i will keep searching oh and the wheels american racing makes a set for the 94& up muscraat that i am interested in they just dont come in four lug thanks ------------------ 92 wannabe saleen

07-02-2001, 08:53 PM	#4
trbkrb Registered Member Join Date: Jul 2001 Location: Houston, TX Posts: 9	Matt90GT on corral has a lot of info on the swap - check out his webpage : http://svo73mm.cjb.net/ ------------------ Basically stock 87 LX 5.0, owned since 3/31/1987. 216,000+ mile daily driver, GT interior, King Cobra clutch, World Class T-5, GT turbine wheels. Plans: GT hatch & spoiler, rear disk brakes, and a PAINT JOB!

07-07-2001, 04:57 PM	#5
John Cummins Registered Member Join Date: May 1999 Posts: 231	I just ordered a complete 5 lug front conversion from Mustang Parts Specialty. It comes with 94/95 spindles, hubs, 99/01 GT dual piston calipers and brackets, rotors, dust shields, and brake lines. All for $259. For the rear some guy sold me a stock 94 Cobra axle for $350.00 from disk to disk.