MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Classic Mustangs
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-01-2002, 11:30 AM   #1
fordkid68
Registered Member
 
Join Date: Jan 2002
Location: fremont
Posts: 306
Default some comments and questions.

hello every one-

first of all I just wanted to thank you guys for helping me with my rear end swap. I was really suprised that me and my dad got threw it all right since neather one of us has ever done something like that. and I owe it all to you guys. I am actually fealing like I am learning alot more about cars witch is one of the reasons I bought my mustang in such bad shap. and I just wanted to thank you guys. I really appreaciate your help.


also I found A front bench seat for my 66 mustang and was just woundering just how rair these things are.


and as always I have another question. what would be the best way to raise the rear of my mustang. I don't want to raise it alot just so that the back is A litle higher then the front. so that the front and back are almost even but the back like maybe and inch higher then the front. and how many inches all together would I have to rais the back.


thanks again
ford kid
fordkid68 is offline   Reply With Quote
Old 08-01-2002, 03:31 PM   #2
Clark Rodgers
Registered Member
 
Join Date: May 1999
Location: Rowlett,Texas
Posts: 306
Default

Even after you have a mustang as long as I have it is always good to talk and learn from others.

Yes, the front bench seat is rare and worth some money. But at the same time it is a personal preference, most like the bucket seats.

The best way to raise the back of the mustang is new leaf springs. I know you can use shackles or air shocks, but the new springs are the best answer and run you about $130.
__________________
69 393W Sportsroof deluxe
Clark Rodgers is offline   Reply With Quote
Old 08-01-2002, 05:23 PM   #3
fordkid68
Registered Member
 
Join Date: Jan 2002
Location: fremont
Posts: 306
Default

what do you mean new leaf springs. you mean like A new set with more springs on each side. or what.

well at least there is another way besides air shocks and shackle's cuz I think they look funny.


yea I know it's A personal preferance and I all ready bought the seat I was just woundering if it is rare or if I just hadn't seen one yet.

thanks
ford kid
fordkid68 is offline   Reply With Quote
Old 08-01-2002, 07:41 PM   #4
Rev
Registered Member
 
Rev's Avatar
 
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
Default Leaf springs

I got my leaf springs from Mustang Plus in Ca. I got the 5 leaf with mid eye option. they are fairly stiff and the mid eye raises the rear about an inch. I chose those because I have a more or less road race suspension. You can get regular eye (standard) or reverse eye that gives more (2"?) lift. The 4 or 4 1/2 leaf versions give a softer ride than my 5 leaf springs.

Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi.

O.B.C. #2


'66 coupe
Rev is offline   Reply With Quote
Old 08-02-2002, 01:19 AM   #5
fordkid68
Registered Member
 
Join Date: Jan 2002
Location: fremont
Posts: 306
Default

thanks Rev. yea I heard good thing about mustang plus so I think I will go with them.


thanks
ford kid
fordkid68 is offline   Reply With Quote
Old 08-02-2002, 01:50 AM   #6
fordkid68
Registered Member
 
Join Date: Jan 2002
Location: fremont
Posts: 306
Default

Rev I was just on mustangs plus website and if you look under the pictures and read the fine print it says that mid eye lowers the rear 1 inch and the revers eye lower the rear 1 and A half inches. so whats going on. did you mean to say it lowers it or is it just A miss print on the web site or what. I am confused.

thanks
ford kid
fordkid68 is offline   Reply With Quote
Old 08-02-2002, 09:46 AM   #7
Clark Rodgers
Registered Member
 
Join Date: May 1999
Location: Rowlett,Texas
Posts: 306
Default

Fordkid,
The mustangs plus website is correct the mid or reverse eye will lower your car the height you stated, but remember that when they say this height, this is when the leaf springs are new. So chances are your springs are sagging like most due, so a new set of springs will raise the car alot compared to sagging springs.

Unless you are going to drop the front with some lowering springs go with the standard eye 4 1/2 but if you plan on lowering the front go with the mid-eye and the 5 leaf's are a little too stiff for me.
__________________
69 393W Sportsroof deluxe
Clark Rodgers is offline   Reply With Quote
Old 08-02-2002, 11:05 AM   #8
Rev
Registered Member
 
Rev's Avatar
 
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
Default That's right

That's right, I had things backwards once again. Old age? Hee,hee. Sorry for the mistake. I actually lowered the rear about an inch and lowered my front about 2 inches, so the rear is a little higher than the front. That's what screwed me up.

Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi.

O.B.C. #2


'66 coupe
Rev is offline   Reply With Quote
Old 08-02-2002, 11:22 AM   #9
fordkid68
Registered Member
 
Join Date: Jan 2002
Location: fremont
Posts: 306
Default

allright. good. I wasn't even thinking of my leaf springs sagging.

thanks guys
ford kid
fordkid68 is offline   Reply With Quote
Old 08-03-2002, 05:14 PM   #10
twinturbo69
Registered Member
 
Join Date: Apr 2002
Location: CA
Posts: 10
Default

if you get new rear leafs, get them from Mustangs plus, I did i have the reverse eye which is the lowest, then I lowered another inch, then I got the 620 springs in front, also tubular upper control arms whih lowered it 3 in the fron, with my 1998 17 inch cobra rims and 275/40 tires, my car looks f'in awesome.....but it is very low to the ground, the down pipe from the driver side turbo scrapes sometime, but it looks good
__________________
how many other twin turbo convertible
old schools do you see every day??
twinturbo69 is offline   Reply With Quote
Old 08-04-2002, 12:42 AM   #11
fordkid68
Registered Member
 
Join Date: Jan 2002
Location: fremont
Posts: 306
Default

thanks yea I am sure I will be going with mustang pluss I have never heard bad things about them. well now that I have said that I know it's comming.


thanks
ford kid
fordkid68 is offline   Reply With Quote
Old 08-05-2002, 02:05 AM   #12
twinturbo69
Registered Member
 
Join Date: Apr 2002
Location: CA
Posts: 10
Default

Ford Kid, I just realized you live in Fremont, would that be fremont California, if so, I live there too, keep an eye out for a really fast convertible
__________________
how many other twin turbo convertible
old schools do you see every day??
twinturbo69 is offline   Reply With Quote
Old 08-05-2002, 03:23 AM   #13
69fastback
IRAQ VET
 
69fastback's Avatar
 
Join Date: Feb 2000
Location: high desert California
Posts: 1,480
Default

Yeah i got my rear leafs form mustang plus too. I got the mid eye and it really lowered the rear end of my car. Now the front end sits up alot higher. It looks like crap. Oh well I Just need to cut the front springs and everything will be ok. Anyway mustang plus always has good stuff. They are a little expensive but i have never had any problems with quality of the products i have bought form them
__________________
428 Cobra Jet
SOHC 5.4 3V F-150
96 mystic cobra
91 GT
69fastback is offline   Reply With Quote
Old 08-05-2002, 08:00 AM   #14
mustangman65_79
My poor 79 RIP
 
mustangman65_79's Avatar
 
Join Date: Oct 2001
Location: Suisun City,
Posts: 2,320
Default

JC Whitney sells lift springs for your car. They say it's about 3" over stock. Good price too. If it's too high, u can always lower the rear after u install the springs. I bought some from them for my '79. Good springs, a little stiff, but thats about it.
__________________
'84 mustang GT turbo
'85 LTD
'89 Camaro Irocz z28
'94 Lightning
'96 Trans am
mustangman65_79 is offline   Reply With Quote
Old 08-05-2002, 12:15 PM   #15
fordkid68
Registered Member
 
Join Date: Jan 2002
Location: fremont
Posts: 306
Default

I forgot all about JC whitney. yea I used to by stuff from them for other cars. thanks I will probly go with them.


twinturbo69- yea that would be fremont california. good to here some one ellse is around. what color is your stang. well dont count on racing me for A while I got A 66 straight six. can't seem to get anuf money for A V8 swap. something ellse always comes up. any ways if I see you then I"ll be sure to wave.


thanks
ford kid
fordkid68 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch Questions Rosco Windsor Power 27 04-18-2002 09:01 PM
Questions Rosco Windsor Power 23 03-16-2002 01:28 AM
Questions about DIS-4 and Accel CoilPacks 98SteedaGT Modular Madness 1 01-16-2002 02:12 PM
Roller Rocker Install Questions! chris91LX Windsor Power 2 11-12-2001 09:03 PM
Tire brand questions Chevyguy Windsor Power 4 10-10-2001 08:42 AM


All times are GMT -5. The time now is 07:23 AM.


SEARCH