need a bit of help

Metal396 · 11-19-2002, 08:22 PM

ok, im scouting out all the parts i need for putting on the new Intake and 4 Barrel.... I just need to know exactly EVERY little extra part i need to get it done the first time, correctly...

First off, if im going with an edelbrock carburator, i need:
----------------------------------------------
"Edelbrock Throttle Lever Adapter"
EDL-1483
http://store.summitracing.com/partdetail.asp?part=13874
-----------------------------------------------
Correct so far? ok lets go on...
-----------------------------------------------
"Summit Fuel Line Kit"
SUM-G3128
http://store.summitracing.com/partdetail.asp?part=11232
-----------------------------------------------
How am i supposed to put the fittings on the hose though????
And next i really dont know if i need this or not:
-----------------------------------------------
"Edelbrock Throttle Cable Plate Kit"
EDL-1493
http://store.summitracing.com/partdetail.asp?part=13928
-----------------------------------------------
It says that its for 351M and 400M motors... will it still work for my cleveland???? theres nothing like that that says "351C" at all.

Is there anything else i need for the carb , besides the fasteners to hold it to the intake? I will reply to this post with similar questions on the intake stuff.

11-19-2002, 08:22 PM	#1
Metal396 Registered Member Join Date: Jun 2002 Location: Southern California Posts: 109	need a bit of help ok, im scouting out all the parts i need for putting on the new Intake and 4 Barrel.... I just need to know exactly EVERY little extra part i need to get it done the first time, correctly... First off, if im going with an edelbrock carburator, i need: ---------------------------------------------- "Edelbrock Throttle Lever Adapter" EDL-1483 http://store.summitracing.com/partdetail.asp?part=13874 ----------------------------------------------- Correct so far? ok lets go on... ----------------------------------------------- "Summit Fuel Line Kit" SUM-G3128 http://store.summitracing.com/partdetail.asp?part=11232 ----------------------------------------------- How am i supposed to put the fittings on the hose though???? And next i really dont know if i need this or not: ----------------------------------------------- "Edelbrock Throttle Cable Plate Kit" EDL-1493 http://store.summitracing.com/partdetail.asp?part=13928 ----------------------------------------------- It says that its for 351M and 400M motors... will it still work for my cleveland???? theres nothing like that that says "351C" at all. Is there anything else i need for the carb , besides the fasteners to hold it to the intake? I will reply to this post with similar questions on the intake stuff. __________________ 1973 Mustang Coupe 351 cleveland 2v heads Edelbrock Performer Intake, Holley 600cfm carb Hooker Headers, 2.5 inch pipes, Magnaflow X-pipe, Flowmaster 2 chamber mufflers with turndowns. Stock Fmx tranny and 2.75 rear end My website:http://www.geocities.com/spddemontc User Rides Index: http://www.mustangworks.com/cgi-bin/...splay.cgi?2541