The body in my avaitor is only about $3300 at mustang depot.com and yes I'm going to do most of the body work myself except hanging the 2 quarters panels not that great of a welder. but all the fiberglass work I'm going to do myself. I learned to do fiberglass work when I was in college years ago, Im shaving my door handles,locks,antenna,trunk lock, and put in door and trunk pops in with my alarm w/remote start. That kit comes with like 6 different hoods I'm doing the 67' shelby hood which they made fit the 66. you should take a look at the kit at
http://www.mustangdepot.com/OnLineCa...erglass/e2.htm it basically the eleanor kit for the coupe. The stereo I'm putting in it your not going to see it. The head unit is going to be in glove compartment and I'm going to have about 10 speakers in it and your only going to see mybe 2 of them in the kick panels and then Im going to have either 2 10's or 12's in the trunk that are going to be hidden with 3 or 4 amps with it. My sunfire is the sort of the same way with the speaker and amp set up but you can 6 of the speakers and 10 hidden and 2 12's in the trunk with 6 amps. The wheels are going to be 17X7 front 17x10 rear torque thrust II's with c/a blue centers. The rear bumper will be fiberglass painted to match car with no front bumper and bullet gas cap and tail light covers with seq. led tail lights. I haven't decided if I'm going to put tint on the windows or not. I know I planned on doing side exhaust on mine if I can get it to work with 3" exhaust setup. I also going to put the rear louvers on the rear window. That some of the things with the exterior and stereo setup but there is about $40 to $50,000 dollars of other extras I want to do to it that would take for ever to mention.