Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
04-21-2002, 03:29 AM
|
#1 |
|
Registered Member
Join Date: Mar 2002
Location: virginia
Posts: 9
|
top end noise
I had a decent running 302 from a 79 Marquise and pulled it to put in my 66. So I changed the seals and oil pump and pan. Well since i was there I decided to go for a small cam and 4bbl it. Hence the problem. It seems to run good except eithier 5 or 6 is vibrating like a collapsed lifter. I made sure they were pumped up and they are new. After not being able to figure it out I just put all the old stuff back in. Cam, lifters and pushrods.Same thing. That noise and vibration is still there on cyl.5 or 6. Compression is good and it seems to run good. These heads have the bolt down rockers so there is no adjustment. Im at a complete loss. Any ideas? Thanks
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 3.55:1 rear end noise, is it normal? | Mo65 | Classic Mustangs | 16 | 08-26-2002 08:07 AM |
| Motor back together - strange noise???? | DZEE'S LX | Windsor Power | 13 | 03-15-2002 12:46 AM |
| Calling all Guru's - peculiar noise after injector swap | 93GTDIN | Windsor Power | 3 | 01-09-2002 07:51 PM |
| Rear end Noise or Tranny Noise??? | jz_mustang50 | Windsor Power | 0 | 10-02-2001 05:21 PM |
| Air Intake Whistling Noise?! | sgrn | Modular Madness | 4 | 10-25-2000 09:46 AM |