MustangWorks.com : Ford Forums - View Single Post

66StangGuy · 05-19-2003, 02:26 PM

stock cam stock heads.

what should i get first

roller rockers?
heads?
cam?

i dont rev past 5500 rpm but im afraid to pull the pressed in studs out of the heads..but i want to upgrade the rockers at the same time because it removes friction and power loss also i want to go with the 1.7's so i can get a little more lift on my stock cam.
then i would like to upgrade cam and then heads... should i go in this order or should i get heads first then cam or just go cam?

im not sure what year heads i have but they are 302 with stock valves. stock cam.. also what is the stock lift and duration with this cam?

what to do first?? thanks.

05-19-2003, 02:26 PM	#1
66StangGuy Registered Member Join Date: Feb 2002 Location: Diamond Bar Posts: 258	valve train questions..what to get first stock cam stock heads. what should i get first roller rockers? heads? cam? i dont rev past 5500 rpm but im afraid to pull the pressed in studs out of the heads..but i want to upgrade the rockers at the same time because it removes friction and power loss also i want to go with the 1.7's so i can get a little more lift on my stock cam. then i would like to upgrade cam and then heads... should i go in this order or should i get heads first then cam or just go cam? im not sure what year heads i have but they are 302 with stock valves. stock cam.. also what is the stock lift and duration with this cam? what to do first?? thanks. __________________ 66 mustang-292-Holley 4160-World Castings Windsor Sr.-Hooker super comp headers-MSD box & Coil.3.55 gears. B&M Z-Gate-Black leather racing seats with 4pt harnes.