VIN Locations

Blacky · 07-15-2002, 09:35 PM

Hi all,

I am new/old to this forum. I used to frequent this message board some yrs ago but lost my registration so I have a new registration. Anyhow, I have a slight problem and looking for some help.

I have a 67 Mustang coupe all tore apart. It's literally a rolling shell. I tried to get the title transferred into my name, but the local DMV could not locate 2 VIN to verify the title. The one obvious VIN is on the upper left fender apron. Anyone know of place to look? We checked the dash & inside firewall without any luck.

Any suggestion would be appreciated. Thank You.

Blacky

6T9PONY · 07-15-2002, 10:19 PM

On my '69 the VIN is stamped into the top of the fender aprons on both sides. To see these you have to take the fenders off the car though. The other one on my car is on a little metal tag in the driver's side corner at the bottom of the windshield that sticks out above the dash and you can read it through the windshield. I'm not sure of the differences between '67 and '69 though.

Blacky · 07-15-2002, 10:29 PM

YOU ROCK!!!!!!! It was in the same spot on the other fender apron, I did have to move the fender to see it.

Thank you very much 6T9PONY

Blacky

induction · 07-16-2002, 01:56 AM

Hey 6T9PONY nice call on the vin locations, Dam I just learned something new today . I was unaware they were hidden under the fender apron on those years . I agree with blacky "YOU ROCK"

1969Mach1 · 07-16-2002, 01:57 PM

Hell 6T9Pony ya're my Hero too! Ya drive one sweet car.

lol Yeh, I believe it's stamped on the rearend, transmission, and on the block somewhere. I know they stamped the car a whole bunch of times I'm not sure where exactly else.

Sam.

6T9PONY · 07-16-2002, 05:25 PM

Thanx guys. I appreciate it.

But no, they don't have a VIN on the rear, tranny, and engine. They just have the part numbers stamped on to those, along with about every other part on the car.

C9XX XXXX....there's usually a number similar to that stamped on to about every part on a '69 Mustang....For a '67 it would be C7XX XXXX or whatever.....in '70 it's D0...... The letter represents the decade and the number represents which year. My engine is D1 ('71) and my tranny is a C6 ('66, not a C-6 tranny, it's a C-4

)

07-15-2002, 09:35 PM	#1
Blacky Registered Member Join Date: Jul 2002 Location: Aloha, Or Posts: 2	VIN Locations Hi all, I am new/old to this forum. I used to frequent this message board some yrs ago but lost my registration so I have a new registration. Anyhow, I have a slight problem and looking for some help. I have a 67 Mustang coupe all tore apart. It's literally a rolling shell. I tried to get the title transferred into my name, but the local DMV could not locate 2 VIN to verify the title. The one obvious VIN is on the upper left fender apron. Anyone know of place to look? We checked the dash & inside firewall without any luck. Any suggestion would be appreciated. Thank You. Blacky

07-16-2002, 01:56 AM	#4
induction The Brit! Join Date: Feb 2001 Location: Across the Pond! Posts: 694	Hey 6T9PONY nice call on the vin locations, Dam I just learned something new today . I was unaware they were hidden under the fender apron on those years . I agree with blacky "YOU ROCK" __________________ *Restored 1965 Coupe* *April Mare of the Month* RiceHatersClub Member #27

07-16-2002, 01:57 PM	#5
1969Mach1 HEY I CAN SET A NAME NOW! Join Date: Oct 2001 Location: Ontario, Canada Posts: 2,556	Hell 6T9Pony ya're my Hero too! Ya drive one sweet car. lol Yeh, I believe it's stamped on the rearend, transmission, and on the block somewhere. I know they stamped the car a whole bunch of times I'm not sure where exactly else. Sam. __________________ 1969 Mustang Mach 1Sold 351-4V Windsor, 4 Speed MACH 1 - Moving At The Speed Of Sound. 1979 Mustang Indianapolis 500 Pace Car For Sale - Email me for Info 302-2V, 3-Speed Auto One of 2,106 made One of 405 sent to Canada. Yes those are caution lights, and No you can't pass me when there on. Ricer Hater's Club - Member #4

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
locations	bald guy 90gt	Blue Oval Lounge	43	02-10-2003 08:24 PM
Aftermarket parts locations?	badmix rcr	Modular Madness	2	10-09-2002 10:14 AM
6.5 Components in Our 6x8 Locations?	Mustangbelle306	Audio, Security, & Electronics	1	08-05-2002 02:31 PM
Speaker locations and Amp selection	Timanator	Audio, Security, & Electronics	0	07-07-2001 08:46 PM
ATTN: West Palm Beach area stangs...or close locations	EZRIDN	Blue Oval Lounge	2	05-03-2001 02:02 PM

07-15-2002, 10:19 PM	#2
6T9PONY All about the Windsor. Join Date: Feb 2000 Posts: 2,052	On my '69 the VIN is stamped into the top of the fender aprons on both sides. To see these you have to take the fenders off the car though. The other one on my car is on a little metal tag in the driver's side corner at the bottom of the windshield that sticks out above the dash and you can read it through the windshield. I'm not sure of the differences between '67 and '69 though.

07-15-2002, 10:29 PM	#3
Blacky Registered Member Join Date: Jul 2002 Location: Aloha, Or Posts: 2	YOU ROCK!!!!!!! It was in the same spot on the other fender apron, I did have to move the fender to see it. Thank you very much 6T9PONY Blacky

07-16-2002, 05:25 PM	#6
6T9PONY All about the Windsor. Join Date: Feb 2000 Posts: 2,052	Thanx guys. I appreciate it. But no, they don't have a VIN on the rear, tranny, and engine. They just have the part numbers stamped on to those, along with about every other part on the car. C9XX XXXX....there's usually a number similar to that stamped on to about every part on a '69 Mustang....For a '67 it would be C7XX XXXX or whatever.....in '70 it's D0...... The letter represents the decade and the number represents which year. My engine is D1 ('71) and my tranny is a C6 ('66, not a C-6 tranny, it's a C-4 )