competion engineering torque link

gray87GT · 05-07-2001, 05:27 PM

I was wondering if anybody has used there torque link. It looks like it would work pretty good, except it mounts to the sway bar mount. Has anybody had any problems with them? Thanks

302man · 05-07-2001, 05:53 PM

I have it on my car. Its a great design, they just gut a few corners. Like, the "turn buckle" They used right hand threads at both ends and they coated everything with the gold anadising. So I had to re-tap the turn buckle and run a die over ends. But other than those minor problems, it does hold the engine down very good and no increase in vibration was felt. It mounts to the top of the swaybar and goes to the first large head bolt accessory hole in the head.

------------------
302,vortech s trim @18-20lbs showing,edelbrock performer heads-o ringed,gt 40 upper&lower, mac 1 5/8"long tubes, sub frame connectors,50/50 rear, 70/30 front, manual rack,3:55 gears, c4 , best time 10.13@135mph

05-07-2001, 05:27 PM	#1
gray87GT Registered Member Join Date: Jan 2001 Location: Minnesota Posts: 177	competion engineering torque link I was wondering if anybody has used there torque link. It looks like it would work pretty good, except it mounts to the sway bar mount. Has anybody had any problems with them? Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
raced a Supra Twin Turbo	Stang35th	Stang Stories	63	08-23-2003 12:36 AM
Torque strap. Yes or no	Dark_5.0	Windsor Power	3	06-05-2003 07:00 AM
T-5 Torque Rating	sleeperstang	Classic Mustangs	5	07-05-2002 10:54 PM
T-5 Torque Rating	sleeperstang	Windsor Power	1	06-27-2002 08:18 PM
what kind of torque converter?	Reipen	Windsor Power	1	04-29-2002 02:45 PM

05-07-2001, 05:53 PM	#2
302man Registered Member Join Date: Jul 1999 Location: INDIANAPOLIS Posts: 404	I have it on my car. Its a great design, they just gut a few corners. Like, the "turn buckle" They used right hand threads at both ends and they coated everything with the gold anadising. So I had to re-tap the turn buckle and run a die over ends. But other than those minor problems, it does hold the engine down very good and no increase in vibration was felt. It mounts to the top of the swaybar and goes to the first large head bolt accessory hole in the head. ------------------ 302,vortech s trim @18-20lbs showing,edelbrock performer heads-o ringed,gt 40 upper&lower, mac 1 5/8"long tubes, sub frame connectors,50/50 rear, 70/30 front, manual rack,3:55 gears, c4 , best time 10.13@135mph