

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Aug 2001
Location: Ft. Worth, TX
Posts: 456
|
![]() O.K. I am pretty much finished with the install except for one wire. The old power wire (black with orange stripe) joined with a yellow wire right before the solenoid. What wire is that? Is is the same yellow wire that goes to the "D" shaped plug on the alternator? I am doing away with the black/orange wire and using a 4AWG wire instead. I just want to make sure that I get the yellow hooked up correctly. Can I just put a connector on there and attach it to the + side of the solenoid? This is a 3G upgrade on an 89 Fox. Thanks in advance.
__________________
You're gonna need your seatbelt |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Aug 2001
Location: Ft. Worth, TX
Posts: 456
|
![]() I was overwhelmed with responses and I was able to figure it out.
![]()
__________________
You're gonna need your seatbelt |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Sep 2001
Posts: 512
|
![]() Did you install a 4gauge wire to battery to handle the increased amps? If not, it could be a fry baby on you.
|
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Aug 2001
Location: Ft. Worth, TX
Posts: 456
|
![]() I sure did. However, nobody else seems to think it is necessary? Why in the world would you even take a chance.
![]()
__________________
You're gonna need your seatbelt |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Aug 1999
Location: Charlottesville, Va, USA
Posts: 328
|
![]() I'm pretty sure that 94-95 mustangs only have 10 gauge wire and they come stock with the bigger alt.
__________________
93 LX R331/AFR 205/Vic 5.0/? psi |
![]() |
![]() |
![]() |
|
|