All Hopped Up

MEE · 09-22-2002, 05:06 PM

WELL I,M WANTING 2 PUT A 0.450 INCH LIFT CAM IN MY 93 4CYL. & AM WONDERING HOW AND IF I COULD MAKE IT WORK WITH JUST STOCK PARTS. I KNOW THAT AT LEAST 9.5:1 COMP. IS A START BUT I, M LOST AFTER THAT .ANY HELP WOULD BE APPER...

WELL 2 WORK WITH LEAST AFTERMARKET PARTS WOULD BE GOOD.

84gt347 · 09-24-2002, 10:13 AM

I think the issue would be piston to valve clearance. I'm not sure what the specs are for a 4cyl. Maby somebody on here knows. You'd be set on a 5.0

09-22-2002, 05:06 PM	#1
MEE Registered Member Join Date: Sep 2002 Location: BFE Posts: 1	All Hopped Up WELL I,M WANTING 2 PUT A 0.450 INCH LIFT CAM IN MY 93 4CYL. & AM WONDERING HOW AND IF I COULD MAKE IT WORK WITH JUST STOCK PARTS. I KNOW THAT AT LEAST 9.5:1 COMP. IS A START BUT I, M LOST AFTER THAT .ANY HELP WOULD BE APPER... WELL 2 WORK WITH LEAST AFTERMARKET PARTS WOULD BE GOOD.

09-24-2002, 10:13 AM	#2
84gt347 Registered Member Join Date: Mar 2002 Location: sherwood Forest Posts: 291	I think the issue would be piston to valve clearance. I'm not sure what the specs are for a 4cyl. Maby somebody on here knows. You'd be set on a 5.0 __________________ 84 gt350 89 lx vert 92 lincoln lsc. All Forced ( one way or another)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: