Update on the MAC Intake - Not good news!

88COBRA · 02-27-2001, 01:07 PM

As some of you know I run www.stangpower.com and I was going to be amoung the first to offer the MAC intake.

I just received word from my supplier that MAC is not releasing until May or June. They want to release the 351 and 302 intakes at the same time.

If you would like to be notified when I get them, send me an e-mail, and I will add you to my list.

Ian

------------------
Ian Sim
webmaster@stangpower.com
STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded
LOTS OF PRODUCTS, AWESOME PRICES! Visit my site:
http://www.stangpower.com

LX XLR8R · 02-27-2001, 02:08 PM

really..i talked to my MAC guy a month ao and said he didnt know..how are the new oil pans?

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..

IMPULSERACING · 02-27-2001, 02:59 PM

I spoke with MAC about a week ago they told me that they were taking orders in April and the intakes would be in, in June.

To bad, they should have had them ready by april for the start of the racing season.

------------------
92' LX Hatch 5 spd Edelbrock Performer Intake, pro-m 75mm MAF, 70mm T.B., 24lb injectors, 190lph, Mac fenderwall cold air induction, mallary ignition and coil, Cobra 1.7 rockers, 373:1 gear, upper and lower control arms, supersubs, 50/50's, front drag springs, no sway bar, battery in hatch, compucar N20 kit

rtz · 02-28-2001, 12:29 AM

Is that intake supposed to be any good? I like the price on it so far.

88COBRA · 02-28-2001, 12:32 AM

It is supposed to be very good.

MAC is making me look bad

There is now a rumor that the price will not be $300 rather it will be $400. MAC will honor the $300 for the first few weeks because THEY released the wrong price.

Ian

------------------
Ian Sim
webmaster@stangpower.com
STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded
LOTS OF PRODUCTS, AWESOME PRICES! Visit my site:
http://www.stangpower.com

rtz · 02-28-2001, 12:39 AM

That's too bad because they would have sold a lot more intakes had it been $300, instead of $400 or more like the rest of them.

88COBRA · 02-28-2001, 12:42 AM

No kidding, I had so many orders lined up, it really pisses me off

I could have retired on this intake LOL

I am sure they will sell out very quickly at $300.

Ian

------------------
Ian Sim
webmaster@stangpower.com
STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded
LOTS OF PRODUCTS, AWESOME PRICES! Visit my site:
http://www.stangpower.com

silver_pilate · 02-28-2001, 05:24 PM

88COBRA,

Just checked out Stangpower. That's a really good price on the MAC TB/EGR set.

Just curious if you've had any problems with 'em.

Anyway, you may be hearing from me soon about an order....

--nathan

------------------
--silver_pilate

'91 GT, Built 306, Wolverine 1087 cam, ported Windsor Jr. Irons, and all the goodies...click the link to the left to see a full list of my mods...

Tried and True 302 Being Built to Outrun You! heh heh heh...
--Texas Panhandle--
Check out my site

88COBRA · 02-28-2001, 06:01 PM

Hey Pilate!

Thanks! I work hard with my supplier to get the best prices on the net.

I have sold a few, with NO complaints. I searched a few of the message boards and they all agree it is a great product!

Hope to hear from you soon!

Ian

------------------
Ian Sim
webmaster@stangpower.com
STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded
LOTS OF PRODUCTS, AWESOME PRICES! Visit my site:
http://www.stangpower.com

LOCASH · 02-28-2001, 07:33 PM

I just read 5.0 mustang and superfords' article on the MAC intake. The price in the article was also $300. They mentioned because of the low cost of the foundry or something. Is this the error your ref. to?

------------------
86 GT T-tops, AOD, B&M shift kit and hammer shifter, ROH wheels, K&N, Timing,MAC headers, 2.5 off road H, 2.5 American Thunder, 87 spindles, rear disc,SS lines, BBK 1.5, poly bushings, Steeda G-trac and subs, Strut bar.
"DRIVE LIKE YOU STOLE IT!"

5.0 Coupe · 03-01-2001, 10:07 AM

Sounds like MAC has come up with a good idea on how to sell there setup quick!! What better idea but to tell people that they will sell the thing at 300 and then come out and say they made a mistake and really will be selling at 400, but will allow some people to buy at 300. I heard that the price will remain around the 300, but will sellout very fast in the first few weeks. Maybe this will become a trend

88COBRA · 03-01-2001, 11:49 AM

5.0 Coupe

You got it!

That is exactually what they are going to do.

Ian

------------------
Ian Sim
webmaster@stangpower.com
STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded
LOTS OF PRODUCTS, AWESOME PRICES! Visit my site:
http://www.stangpower.com

02-27-2001, 01:07 PM	#1
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	Update on the MAC Intake - Not good news! As some of you know I run www.stangpower.com and I was going to be amoung the first to offer the MAC intake. I just received word from my supplier that MAC is not releasing until May or June. They want to release the 351 and 302 intakes at the same time. If you would like to be notified when I get them, send me an e-mail, and I will add you to my list. Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded LOTS OF PRODUCTS, AWESOME PRICES! Visit my site: http://www.stangpower.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speed Secret # 4	jim_howard_pdx	Windsor Power	13	11-10-2002 03:42 PM
Speed Secret # 3	jim_howard_pdx	Windsor Power	13	11-09-2002 10:35 AM
some real good news	ARMYMANUS	Windsor Power	0	09-12-2001 07:21 PM
Good news....Almost done!!!!	Stang_ROTY	Windsor Power	0	05-31-2001 11:47 AM
Good News for Igloo Racers	George Klass	Racer's Club House	3	07-28-1999 09:28 AM

02-27-2001, 02:08 PM	#2
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	really..i talked to my MAC guy a month ao and said he didnt know..how are the new oil pans? ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..

02-27-2001, 02:59 PM	#3
IMPULSERACING Registered Member Join Date: Dec 1999 Location: chicago,IL,USA Posts: 158	I spoke with MAC about a week ago they told me that they were taking orders in April and the intakes would be in, in June. To bad, they should have had them ready by april for the start of the racing season. ------------------ 92' LX Hatch 5 spd Edelbrock Performer Intake, pro-m 75mm MAF, 70mm T.B., 24lb injectors, 190lph, Mac fenderwall cold air induction, mallary ignition and coil, Cobra 1.7 rockers, 373:1 gear, upper and lower control arms, supersubs, 50/50's, front drag springs, no sway bar, battery in hatch, compucar N20 kit

02-28-2001, 12:29 AM	#4
rtz Registered Member Join Date: Feb 2001 Location: Edmond, OK Posts: 180	Is that intake supposed to be any good? I like the price on it so far.

02-28-2001, 12:32 AM	#5
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	It is supposed to be very good. MAC is making me look bad There is now a rumor that the price will not be $300 rather it will be $400. MAC will honor the $300 for the first few weeks because THEY released the wrong price. Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded LOTS OF PRODUCTS, AWESOME PRICES! Visit my site: http://www.stangpower.com

02-28-2001, 12:39 AM	#6
rtz Registered Member Join Date: Feb 2001 Location: Edmond, OK Posts: 180	That's too bad because they would have sold a lot more intakes had it been $300, instead of $400 or more like the rest of them.

02-28-2001, 12:42 AM	#7
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	No kidding, I had so many orders lined up, it really pisses me off I could have retired on this intake LOL I am sure they will sell out very quickly at $300. Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded LOTS OF PRODUCTS, AWESOME PRICES! Visit my site: http://www.stangpower.com

02-28-2001, 05:24 PM	#8
silver_pilate DURKA DURKA!! Join Date: Sep 1997 Location: Lubbock, TX...(TX panhandle) Posts: 1,418	88COBRA, Just checked out Stangpower. That's a really good price on the MAC TB/EGR set. Just curious if you've had any problems with 'em. Anyway, you may be hearing from me soon about an order.... --nathan ------------------ --silver_pilate '91 GT, Built 306, Wolverine 1087 cam, ported Windsor Jr. Irons, and all the goodies...click the link to the left to see a full list of my mods... Tried and True 302 Being Built to Outrun You! heh heh heh... --Texas Panhandle-- Check out my site

02-28-2001, 06:01 PM	#9
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	Hey Pilate! Thanks! I work hard with my supplier to get the best prices on the net. I have sold a few, with NO complaints. I searched a few of the message boards and they all agree it is a great product! Hope to hear from you soon! Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded LOTS OF PRODUCTS, AWESOME PRICES! Visit my site: http://www.stangpower.com

02-28-2001, 07:33 PM	#10
LOCASH Registered Member Join Date: Oct 2000 Location: Santa Lucia di Budoia, Italy Posts: 217	I just read 5.0 mustang and superfords' article on the MAC intake. The price in the article was also $300. They mentioned because of the low cost of the foundry or something. Is this the error your ref. to? ------------------ 86 GT T-tops, AOD, B&M shift kit and hammer shifter, ROH wheels, K&N, Timing,MAC headers, 2.5 off road H, 2.5 American Thunder, 87 spindles, rear disc,SS lines, BBK 1.5, poly bushings, Steeda G-trac and subs, Strut bar. "DRIVE LIKE YOU STOLE IT!"

03-01-2001, 10:07 AM	#11
5.0 Coupe Registered Member Join Date: Oct 2000 Location: Tulare, CA Posts: 83	Sounds like MAC has come up with a good idea on how to sell there setup quick!! What better idea but to tell people that they will sell the thing at 300 and then come out and say they made a mistake and really will be selling at 400, but will allow some people to buy at 300. I heard that the price will remain around the 300, but will sellout very fast in the first few weeks. Maybe this will become a trend

03-01-2001, 11:49 AM	#12
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	5.0 Coupe You got it! That is exactually what they are going to do. Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded LOTS OF PRODUCTS, AWESOME PRICES! Visit my site: http://www.stangpower.com