MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Racing > Racer's Club House
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 02-19-2006, 10:22 PM   #1
chriswhtmr
Registered Member
 
Join Date: Feb 2006
Posts: 8
Angry Problems With Speed Density Help

I Have A 87 Gt Speed Density, With The Following Mods
E303 Cam
Typhoon Efi Intake
70 Mm T. Body & Egr
24lb Injectors
Underdrive Pullies
Ported Stock Heads
Short Block Is 30 Over Also
The Car Ran Like A Rapped Ape, But Black Smoked Crazy, Fouled All The PLugs Then Died. Removed The Injectors, Installed The 19lbers And Then The Dang Thing Idles At 2000rpm, And Strugles Underload, Throttle Is Really Delayed, You Hear The Throttle Body Suck Before The Engine Revs. This Want The Problem When The Bigger Injectors Were In. It Had Very Quick Throttle Response, Reved Really Good ????? I Need Help So Through Something At Me ,,, Mayby Need To Switch To Mass Air???
chriswhtmr is offline   Reply With Quote
Old 02-27-2006, 11:44 PM   #2
87 heartbreaker
heerrrre chevy...chevy...chevy
 
Join Date: Jan 2006
Location: SEATTLE< AND I HATE IT... IMA GOOD OL' MONTANA BOY
Posts: 19
Default Re: Problems With Speed Density Help

YES!!!!! almost everything you listed will put a speed density over the edge...........convert ASAP...ps i have a converted 87
87 heartbreaker is offline   Reply With Quote
Old 02-28-2006, 12:15 AM   #3
chriswhtmr
Registered Member
 
Join Date: Feb 2006
Posts: 8
Default Re: Problems With Speed Density Help

Thanks For The Advice, Im Getting The Mass Air Kit This Weekend. Thanks Again
chriswhtmr is offline   Reply With Quote
Old 03-17-2006, 08:38 PM   #4
mooveefreek
Registered Member
 
Join Date: Mar 2006
Posts: 15
Default Re: Problems With Speed Density Help

Maybe you, chriswhtmr, need to pay back the money you scammed off us from these auctions on e-bay.
8388348676
6609345965
8391584341
8391585801
6612715896
mooveefreek is offline   Reply With Quote
Old 03-21-2006, 04:40 PM   #5
mooveefreek
Registered Member
 
Join Date: Mar 2006
Posts: 15
Default Re: Problems With Speed Density Help

Chris, cum out and slither away frum dat rok yoo be hidin' under and de-FEND yoself yoo widdle queef!!! Is yoo willing to embarask yoself in front of yo kind just like da minus vaginus yoo is? I taut mus-STANG peepuls wuz TUFF!!! (i'm a 'vette man myself, sorry guys)
mooveefreek is offline   Reply With Quote
Old 10-02-2010, 11:04 PM   #6
walmic679
Registered Member
 
Join Date: Sep 2010
Posts: 2
Exclamation Re: Problems With Speed Density Help

[QUOTE=chriswhtmr;321505]I Have A 87 Gt Speed Density, With The Following Mods
E303 Cam
Typhoon Efi Intake
70 Mm T. Body & Egr
24lb Injectors
Underdrive Pullies
Ported Stock Heads
Short Block Is 30 Over Also
The Car Ran Like A Rapped Ape, But Black Smoked Crazy, Fouled All The PLugs Then Died. Removed The Injectors, Installed The 19lbers And Then The Dang Thing Idles At 2000rpm, And Strugles Underload, Throttle Is Really Delayed, You Hear The Throttle Body Suck Before The Engine Revs. This Want The Problem When The Bigger Injectors Were In. It Had Very Quick Throttle Response, Reved Really Good ????? I Need Help So Through Something At Me ,,, Mayby Need To Switch To Mass Air???[/QUOTE

I know exactly what your problem is. You cannot run all those mods with speed density. The biggest problem is your e-cam. That cam HAS to be ran off of mass air flow. When you have an ecm that is set up for speed density, you CAN NOT change anything what so ever. The speed density ecm is set up for only one combonation, and that is factory pre-set tuning. I stuck just the e-cam in mine, and it surged at idle, had a "puk" spot in the throttle, and eventually, it foulded up my plugs, both O2's, and my egr. After i installed a mass air flow conversion kit, had no problems after that.
walmic679 is offline   Reply With Quote
Old 11-27-2010, 07:34 AM   #7
88workcar
Registered Member
 
88workcar's Avatar
 
Join Date: Oct 1999
Location: Pierre Part, La. U.S.A.
Posts: 1,850
Default Re: Problems With Speed Density Help

I know exactly what your problem is. You cannot run all those mods with speed density. The biggest problem is your e-cam. That cam HAS to be ran off of mass air flow. When you have an ecm that is set up for speed density, you CAN NOT change anything what so ever. The speed density ecm is set up for only one combonation, and that is factory pre-set tuning. I stuck just the e-cam in mine, and it surged at idle, had a "puk" spot in the throttle, and eventually, it foulded up my plugs, both O2's, and my egr. After i installed a mass air flow conversion kit, had no problems after that.[/QUOTE]

Just because you can not make it work means nothing. I ran SD set up for many years. E cam, B cam, wolverine 1087 cam, big heads, big valves, big pipes,NOS, even a supercharger, all with speed density. No special tricks.
Walmis, ditch the 70mm you do not need it, and change your TPS and set it .
__________________
88workcar
1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft
Rice Hater # 42
To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.
88workcar is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tuning a speed density system with mods Fostang Windsor Power 6 07-10-2002 11:32 PM
First ticket. Sucks, sucks bad. zepherman Blue Oval Lounge 46 12-16-2001 07:24 PM
EFI conversion with Speed Density and a 351w? PSI GUY Windsor Power 2 12-02-2001 11:13 PM
12 second speed density Yan88gt Windsor Power 9 09-13-2001 09:13 PM
speed density question.. bobtodd Blue Oval Lounge 2 04-15-2001 02:03 AM


All times are GMT -5. The time now is 06:32 AM.


SEARCH