safety devices

mean81GT · 03-07-2002, 01:41 PM

When i build my car, i am looking for 10 second et's out of it. What i am looking for is a general listing of what safety devices are required at what e.t. for example, 13.99 and quicker, helmet, 12.99 and quicker, roll cage, and so on. i'm not looking for racing organization specific stuff, just a general list. jeff, or anyone?

Jeff Chambers · 03-08-2002, 07:31 AM

I strongly suggest that you pick up a 2002 NHRA Rule Book at your local track, speedshop or directly from NHRA. If you're building a car for the 10's, there much more than just the SFI quick reference chart (one is located over on the Fun Ford website). There are also requirements that govern fuel line routing, cage construction, battery location, electrical, brakes, wheel studs, valve stems, etc. Much more than anyone can answer here.

mean81GT · 03-08-2002, 04:59 PM

This is the story. I am building a street car, fuel injected turbo. whether or not i get ten's is not really the concern, but more the fact that it is possible with most of the turbo kits available. i won't runm at the track on a regular basis, just a few times a year at test and tunes and stuff. Basically, i wanted the info for those times that i went to the track, so i could make a few runs without getting kicked out. Thanks alot for the info though, i wll get the book and chek it out.

03-07-2002, 01:41 PM	#1
mean81GT Registered Member Join Date: Nov 2001 Location: NY Posts: 299	safety devices When i build my car, i am looking for 10 second et's out of it. What i am looking for is a general listing of what safety devices are required at what e.t. for example, 13.99 and quicker, helmet, 12.99 and quicker, roll cage, and so on. i'm not looking for racing organization specific stuff, just a general list. jeff, or anyone? __________________ I'm a glutton for punishment.

03-08-2002, 07:31 AM	#2
Jeff Chambers Moderator Join Date: Aug 2000 Location: Milan, OH Posts: 2,699	I strongly suggest that you pick up a 2002 NHRA Rule Book at your local track, speedshop or directly from NHRA. If you're building a car for the 10's, there much more than just the SFI quick reference chart (one is located over on the Fun Ford website). There are also requirements that govern fuel line routing, cage construction, battery location, electrical, brakes, wheel studs, valve stems, etc. Much more than anyone can answer here. __________________ Jeff Chambers 1990 Mustang GT 10.032 Seconds / 137.5 MPH 14-time Street Warrior World Record Setter CRT Performance 2001 Tropic Green Mustang GT - 12.181 / 113.2 MPH 2002 Ford F-250 Crew Cab 7.3l Power Stroke - 17.41@77.2 "There's nothing boring about a small block automatic shifting gears at 9400 rpm!"

03-08-2002, 04:59 PM	#3
mean81GT Registered Member Join Date: Nov 2001 Location: NY Posts: 299	This is the story. I am building a street car, fuel injected turbo. whether or not i get ten's is not really the concern, but more the fact that it is possible with most of the turbo kits available. i won't runm at the track on a regular basis, just a few times a year at test and tunes and stuff. Basically, i wanted the info for those times that i went to the track, so i could make a few runs without getting kicked out. Thanks alot for the info though, i wll get the book and chek it out. __________________ I'm a glutton for punishment.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
faulty neutral safety switch???	ultraflo	Windsor Power	14	06-14-2002 02:19 AM
Bad News...blown clutch safety switch	Stang_ROTY	Windsor Power	1	05-31-2002 08:49 PM
Safety Recall for 1999 Cobra and 2000 Cobra R	JoeJ	Special Production	0	04-13-2001 08:18 PM
Fuel Pump Safety Switch	RMARIANI	Windsor Power	1	03-01-2001 10:55 AM