© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
08-05-2002, 12:52 PM | #1 |
Registered Member
Join Date: Apr 2001
Location: Metairie, La. USA
Posts: 132
|
Tint and Tech
My car will be out of the shop this week from the body and paint work. My question is (since I will finally be able to bring it to the track) will I have a problem with limo tint at the track? I have read the NHRA regs and according to the little book only factory tint is allowed.
By the way looking at my sig, what do you think the car will run?
__________________
Engine: 1990 5.8 / Edelbrock Performer set-up MSD ignition Suspension: Maximum Motorsports Caster-Camber Plates / Maximum Motorsports adjustable lower control arms / FRPP heavy duty upper control arms / Tokico Illumina Shocks and Struts / Ground Pounder Coil Over conversion kit front / Steeda cross brace sub-frame connectors / Drivetrain: Tremec 3550 trans / Steeda Tri-Ax shifter / Spec Stage II clutch and pressure plate / Spec aluminum flywheel / 5.8 in the hole |
08-05-2002, 01:51 PM | #2 |
Registered Member
Join Date: May 1999
Location: Georgia
Posts: 3,866
|
The tracks Ive been to have never said anything about darker than factory tint in any vehicles that I have saw, so I wouldnt worry about that.
What will you run.....hmmmm.....let me see.....with a fram fuel filter, flowmaster mufflers, a steeda shift knob among other things...(that shift knob is good for at least a couple tenths)..well, I just cant tell, youll have to take er out to find out... |
08-06-2002, 02:58 PM | #3 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
I don't think the people in the tower would mind the limo tint because I think it would make it easier for them to read your "dial in" on your window
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
08-06-2002, 05:54 PM | #4 |
Registered Member
Join Date: Nov 2001
Location: Northern Kentucky
Posts: 49
|
I run 80% on my fronts and limo on the quarters and rear and have never had a problem at the track
__________________
90 coupe, Cobra brakes, 17x9 cobras MM lowers, SVO uppers, 3.73s, BBK 1 3/4 full lengths, H pipe, flows, subframes, H&R springs, Tokico 5-ways, Pro 5.0. Subframes, K&N, Strut brace, CC plates,83K miles, New Paint.....FOR SALE! |
08-07-2002, 10:51 AM | #5 |
He said Member...heh, heh
Join Date: Sep 1999
Location: Jupiter, Florida U.S.A.
Posts: 3,718
|
I have limo tint and I've never had a problem with it either. Good luck!
__________________
Joe! 1988 GT, 13.58@101mph Check out my listing! Click here! Or my website:www.joe4speed.com |
08-07-2002, 03:08 PM | #6 |
Registered Member
Join Date: Jul 2001
Location: West Bloomfield, MI
Posts: 391
|
i dont know about at the track but i just (today) had 35% on fronts and 17%on rear tinted. it looks sooo clean! i like it a lot. ill get pictures on my website soon.
take care, adam
__________________
90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tint and Tech | Stang951 | Racer's Club House | 1 | 08-07-2002 06:09 AM |
Tint and Tech | Stang951 | Racer's Club House | 0 | 08-05-2002 12:54 PM |