Trans-Brake help!!!
 

I need help hooking up my trans-brake I have 2 wires on my button and 2 on the trans brake. Does one from the button go to 12v power source then the other to one on the brake and the other one left on the brake go to a ground?

------------------
Matt Cruise
MUSTANG MUSCLE PERFORMANCE AND DYNO SERVICE
www.mustangmuscleonline.com

My Lentech is wired a differently from most. I've got a single 12V source that goes into the transmission that powers several functions. My TB wire comes out of the transmission and to one side of my button. The other side of the button is taken to ground. When the switch is open (ground path interrupted), the TB is inactive. When the switch is closed (ground path completed), the transbrake is activated, as long as I'm in low gear that is.



------------------
Jeff Chambers
Trophy Stock #3
11.462 Seconds / 117.43 MPH
Chambers Racing Team