3.8L Mustang - 5.0

nemo728 · 06-26-2001, 01:21 PM

i currently own a 3.8 '94 Mustang. i waz plannin on puttin in a 5.0 or greater engine and adding some NO2 in the future but i waz wonderin what i would need to do to the car in order 2 upgrade the engine & make it able to handle some NO2 in the future. price estimates along w/ any other cheap mods i might need would also b helpful. thanx

------------------
'94 V6 Mustang (work in progress)

fastang · 06-26-2001, 03:54 PM

Just sell it and buy a new one with a 5.0 in it. It will cost a LOT to swap yours. If you really want to keep that particuar car then swap in a 351 or a 331 stroker. You will need a new CPU/harness, new radiator, a complete longblock, a new transmission, new driveshaft, and you might need a new rear end but Im not sure on that one.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

blue00gt · 06-26-2001, 04:26 PM

Would also need a new crossmember and headers/exhaust. For a 351 would need a new hood also.

06-26-2001, 01:21 PM	#1 (permalink)
nemo728 Registered Member Join Date: Jun 2001 Location: SoCal Posts: 4	3.8L Mustang - 5.0 i currently own a 3.8 '94 Mustang. i waz plannin on puttin in a 5.0 or greater engine and adding some NO2 in the future but i waz wonderin what i would need to do to the car in order 2 upgrade the engine & make it able to handle some NO2 in the future. price estimates along w/ any other cheap mods i might need would also b helpful. thanx ------------------ '94 V6 Mustang (work in progress)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 09:06 PM
Yellow Mustang Stampede TULSA OK August 17	stylin99	Ford Show & Go	2	11-09-2004 11:19 PM
Do you think SVT will strike gold with the new supercharged, 390HP 2003 Mustang Cobra	StangFlyer	Blue Oval Lounge	86	04-08-2004 04:33 PM
t-5, is it the same in the 4 cylinder and V8	ex-lt1-guy	Windsor Power	12	03-03-2002 01:59 AM
89-Mustang pulling trailer -vs- 2000 Mustang	Five0	Stang Stories	7	04-01-2001 03:50 AM

06-26-2001, 03:54 PM	#2 (permalink)
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Just sell it and buy a new one with a 5.0 in it. It will cost a LOT to swap yours. If you really want to keep that particuar car then swap in a 351 or a 331 stroker. You will need a new CPU/harness, new radiator, a complete longblock, a new transmission, new driveshaft, and you might need a new rear end but Im not sure on that one. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

06-26-2001, 04:26 PM	#3 (permalink)
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	Would also need a new crossmember and headers/exhaust. For a 351 would need a new hood also.

Sponsored Links