What do you guys think of this combo?

vetteeatr · 01-23-2002, 10:54 AM

Windsor senior heads polished just a little and removed flash

B-303 cam

Holley systemax intake

BBK full lengths

H-pipe with flows

MSD igniton

Pulleys

No Air

10.1 pistons

And some other little igniton things

WHat do yu guys think this will put out? and at what RPM?

Better combo maybe?

Stang Runner · 01-23-2002, 11:46 AM

Well frist off what it the Motor????? need more infor??? is the car Carbed of EFI??? give us more to go on than what you did. THX

vetteeatr · 01-24-2002, 01:40 AM

306 with 24 ibs injectors

Skyman · 01-24-2002, 01:38 PM

I hope you plan on aftermarket heads with that.

And add some 1.7 rockers to the B cam.

Skyler

89 Cobra LX · 01-24-2002, 03:15 PM

There are too many better cams out there than the B-cam. Stay away from the motorsport cams, they're over 10-year old designs. If you must stick with the motorsport stuff, I'd recomend the F-cam.

vetteeatr · 01-24-2002, 05:01 PM

World Windsor Sr. Heads are aftermarket my man

SO what cam would you recommend then I dont really want ot flycut the pistons though?

Skyman · 01-24-2002, 05:12 PM

I didnt see that on the top of your post.

I like the TFS stage 1 cam.

Skyler

Mustangbelle306 · 01-24-2002, 05:32 PM

Quote:

Originally posted by Skyman
I didnt see that on the top of your post.

I like the TFS stage 1 cam.

Skyler

Yes! And Steeda #19...I went with the Comp Cams Xtreme Energy..why stick to a single pattern cam

And no one said you couldn't run a better cam without flycutting your pistons...hell I'm running the equivelent to the X303 and I didn't have to, so I doubt you will either.

89 Cobra LX · 01-25-2002, 10:46 AM

Quote:

Originally posted by Skyman
I like the TFS stage 1 cam.

The TFS #1 cam rocks!

01-23-2002, 11:46 AM	#2
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	Well frist off what it the Motor????? need more infor??? is the car Carbed of EFI??? give us more to go on than what you did. THX __________________ Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm

01-24-2002, 01:38 PM	#4
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	I hope you plan on aftermarket heads with that. And add some 1.7 rockers to the B cam. Skyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

01-24-2002, 03:15 PM	#5
89 Cobra LX Don Corlione Join Date: Jun 2001 Location: Omaha NE USA Posts: 491	There are too many better cams out there than the B-cam. Stay away from the motorsport cams, they're over 10-year old designs. If you must stick with the motorsport stuff, I'd recomend the F-cam. __________________ Eric - 89 Mustang LX coupe 5 speed 302-Cobra Intake-GT40p heads-TFS stage 1 cam-FRPP 1.6 roller rockers-3:73 gears-KYB shocks and struts-Eibach Pro-kit-HPM Mega-bite upper and lower control arms-FRPP aluminum driveshaft-16x8 Chrome Cobra Rs R.H.C. #14

01-24-2002, 05:12 PM	#7
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	I didnt see that on the top of your post. I like the TFS stage 1 cam. Skyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Maxed Out Supercharged Street Combo	vetteeatr	Windsor Power	2	10-16-2002 07:30 PM
combo opinions and questions... please help	dragstang86	Windsor Power	2	10-14-2002 04:40 PM
Exhaust Combo	1hot5.0	Windsor Power	22	10-04-2002 11:17 PM
how much Power would u guys expect from this combo?	fiveOguy20	Windsor Power	6	09-20-2002 02:42 PM
dynoed my car guys!	46stang	Blue Oval Lounge	7	09-11-2001 09:08 AM

01-23-2002, 10:54 AM	#1
vetteeatr Registered Member Join Date: Apr 2001 Location: Olney, Illinois, USA Posts: 212	What do you guys think of this combo? Windsor senior heads polished just a little and removed flash B-303 cam Holley systemax intake BBK full lengths H-pipe with flows MSD igniton Pulleys No Air 10.1 pistons And some other little igniton things WHat do yu guys think this will put out? and at what RPM? Better combo maybe?

01-24-2002, 01:40 AM	#3
vetteeatr Registered Member Join Date: Apr 2001 Location: Olney, Illinois, USA Posts: 212	306 with 24 ibs injectors

01-24-2002, 05:01 PM	#6
vetteeatr Registered Member Join Date: Apr 2001 Location: Olney, Illinois, USA Posts: 212	World Windsor Sr. Heads are aftermarket my man SO what cam would you recommend then I dont really want ot flycut the pistons though?