WALBRO part #?

withamc · 06-11-2001, 12:05 AM

I pulled the fuel tank out of the '93 to put the pump from the '86 in, and the guy already had a WALBRO fuel pump in it. (this thing is full of surprises) Can any body tell from the part # what pump this is, or give me a website to check? On the side of the pump it had:
WALBRO F23U-9350-A2A
AOF289
3549-18
Any help would be appreciated.

------------------
93 GT, CCM long block, GT40P heads, Crane 2031, 1.7 RR's, Moroso cold air, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), 3.55s, B&M Ripper shifter, Black Magic fan

gray87GT · 06-11-2001, 07:30 AM

My stock fuel pump was a walbro.

withamc · 06-11-2001, 08:19 AM

Crap! I do not want to pull that tank out again

How much HP will the stock fuel pump support?

gray87GT · 06-11-2001, 08:59 AM

I don't remember exactly what it will support, but our set-ups are pretty close. I was told by many people to get a bigger pump. I run 24#'ers with a 190 pump 39 on the pressure gauge and at WOT I am not pegging lean on my A/F ratio gauge.

06-11-2001, 12:05 AM	#1
withamc Registered Member Join Date: Aug 2000 Location: Thousand Oaks, CA Posts: 396	WALBRO part #? I pulled the fuel tank out of the '93 to put the pump from the '86 in, and the guy already had a WALBRO fuel pump in it. (this thing is full of surprises) Can any body tell from the part # what pump this is, or give me a website to check? On the side of the pump it had: WALBRO F23U-9350-A2A AOF289 3549-18 Any help would be appreciated. ------------------ 93 GT, CCM long block, GT40P heads, Crane 2031, 1.7 RR's, Moroso cold air, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), 3.55s, B&M Ripper shifter, Black Magic fan

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TFI module part #	GhettoPop	Windsor Power	2	02-12-2004 01:34 PM
How can I tell if a part will pass emmisions?	Kamaro Killer	Windsor Power	2	09-08-2002 07:05 PM
Looking for Bosch part #'s!	chris91LX	Windsor Power	0	12-28-2001 06:58 PM
Need help finding Ford part numbers	Capri306	Windsor Power	0	03-30-2001 10:13 AM
Hard to locate part for 83 stang help!!!	83stanger	Small Ponies	0	03-02-1999 08:52 AM

06-11-2001, 07:30 AM	#2
gray87GT Registered Member Join Date: Jan 2001 Location: Minnesota Posts: 177	My stock fuel pump was a walbro.

06-11-2001, 08:19 AM	#3
withamc Registered Member Join Date: Aug 2000 Location: Thousand Oaks, CA Posts: 396	Crap! I do not want to pull that tank out again How much HP will the stock fuel pump support?

06-11-2001, 08:59 AM	#4
gray87GT Registered Member Join Date: Jan 2001 Location: Minnesota Posts: 177	I don't remember exactly what it will support, but our set-ups are pretty close. I was told by many people to get a bigger pump. I run 24#'ers with a 190 pump 39 on the pressure gauge and at WOT I am not pegging lean on my A/F ratio gauge.