About how quick can i run the 1/4?
I was just wondering about how quick do you guys think i can run the quarter mile? I tried the analyzer but don't know how accurate that thing is. So just curious what you guys think? All my mods are in my sig. I figure with those mods i'm probably around 240 hp with around 300 lbs./ft torque, flywheel of course. I hoping to go 14.7 err something around there.
|
With traction you should be in the 13s with those mods assuming you have a manual. Get some heads and a cam and it will really come alive.
|
Track weight?
What's your race weight? All totalled?
Rev |
Depends. How much do you weigh? I get to the 1/8 mile and i am out of breath. Takes me 35 seconds to get there. :D :D
|
Re: Track weight?
Quote:
|
Quote:
|
I don't think it would take slicks, but you might want to get some drag radials. If you get 2.0 or better 60-fts (which you can do with good street tires with practice) you should be able to hit 13s.
|
I am gonna say a 14.3 just cause of where you live.
|
On street tires, I'm going to guess 14.5.
Good luck, E |
When I had about the same mods, (I had a C&L 73 and stock TB, Underdrives, ceneterforce clutch, longtubes, ported stock intake) I went 13.90's at around 102MPH with 2.0 60ft's. But this was in Ohio too. Just give it hell:cool:
|
14's
I'm betting low to mid 14's at best. I doubt you'll see 13's with 240 HP and 3300 lbs.
Rev |
Re: 14's
Quote:
Caymon |
i say 14.5 @ 99mph. but if you wait much longer to go to the track the AZ. heat will probably put you into the 15's:( good luck! and let us know how you do!
Leon |
All times are GMT -5. The time now is 07:08 AM. |