MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Website Community > Stang Stories
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-24-2003, 03:06 PM   #1
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default 1st Race: Cobra VS Z28

Well I was drivin the new cobra down main street in ventura. its a 4 lane road w/ plenty of stop lights. Im sitting at the light all alone, and I see a LT1 Z28 flying up from behind.


He stops right next to me 2 guys in their mid 20's looking up and down at my car. They chuckle like they are just going to smoke me as they throw a rev. Im looking at their car sizing it up. And the light goes. (I havn't mastered a launch yet in the cobra) And they pull out a half car on me as I bog the cobra with a 1500rpm launch. They pulled out to a car and a half as my torqueless motor w/ 3.27 gears was just passing 4000rpm. Then the cobra started to pull back. I power shifted 2nd and was dead even with him. To the top of 2nd gear I put a full car on them.

Another Red Light. This one leads to the freeway. We line up again, and they are laughin like they won the race. Light goes green, once again they pulled 1-1.5 cars on me at the start. The little 4.6 Revs up and I pass em in 2nd, waving, goodbye. Nail 3rd with almost 2 car lengths on them. We hit the freeway and take it up to about 120 where I had 4 cars on em. I slow down to about 70, cruising, and RICER FLY BY, with them waving makin rude jestures.


First win for the Cobra, I was proud of it.

Sky
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 08-24-2003, 04:20 PM   #2
srv1
Get down.....
 
srv1's Avatar
 
Join Date: Apr 2001
Location: Room 103
Posts: 2,095
Default

Yeah I drove a 99 Cobra. I didnt like it at all. It didnt pull until 4500. No low end torque. It felt slow as well. i really didnt scream the piss out of it either. Next time if I get a chance, I will bring it up a little further. Anyways, good job!

James
__________________
Cobra brakes are on! Finally.....
------------------------------------------------
srv1 is offline   Reply With Quote
Old 08-24-2003, 05:46 PM   #3
Rev
Registered Member
 
Rev's Avatar
 
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
Default 4.10's?

Sounds like it needs 4.10's. That would maybe change the low end personality.

Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi.

O.B.C. #2


'66 coupe
Rev is offline   Reply With Quote
Old 08-24-2003, 07:51 PM   #4
Stang_Crazy
It's never clean enough!
 
Stang_Crazy's Avatar
 
Join Date: Jan 1999
Location: Shaler, PA
Posts: 1,542
Default

I'll second the suggestion of 4.10's!!
__________________
~Dan
2001 SVT Lightning

89' GT : Taking up garage space and waiting for a buyer...

Rice Hater's Club - Member #11
Stang_Crazy is offline   Reply With Quote
Old 08-24-2003, 09:09 PM   #5
Fox Body
Mustang Maniac
 
Fox Body's Avatar
 
Join Date: Sep 2000
Location: GA, U.S.A
Posts: 2,266
Thumbs up

Nice! Good win. Sounds like you raced a bunch of morons, though. Pisses me off when people don't follow simple street race etiquette.

I kinda feel your pain with the '92 GT as it has 2.73s. But hey, I'm loving the gas mileage and being able to run 95 at less than 3k rpm . If I wanna burn gas, I'll drive the '79.

Once again, nice run. Good driving.
__________________
351W-powered 1979 Ford Mustang Ghia notchback
'79 Video @ Idle
Stock 5.8L under 4" cowl 'glass hood, C4 w/ Transgo shift kit, Holley 750 cfm, Edelbrock Performer RPM intake; Fluidyne Al radiator, Flexalite 175 electric fan, 1 5/8" MAC shorty headers, FRPP Al driveshaft; S&W 6-point cage; 2.5" Off road H-pipe, 2-chamber Flowmasters, 8.8" Rear w/ 3.55s; Weld wheels (15x6;15x8), Front: 225/60/15, Rear: 275/50/15 Nitto NT 555R Drag Radials;
14 x 4” K&N X-stream air filter.


'92 GT (5-speed)
Small In Car Video
Stock 5.0L, 2-chamber Flowmasters, MAC CAI, Tri-Ax, Al pedals...

"Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body
Fox Body is offline   Reply With Quote
Old 08-25-2003, 04:47 PM   #6
tireburner163
It's a lot like a race car
 
tireburner163's Avatar
 
Join Date: Aug 2000
Location: Meridian, MS
Posts: 4,130
Default

4.30's
__________________
1987 Buick T-type

1998 HD Electra Elide
tireburner163 is offline   Reply With Quote
Old 08-26-2003, 09:47 AM   #7
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default

You just gotta learn to drive it. I launch at 3000 rpms slipping the clutch. No bog at all. My 01' cobra pulls like a big dawg.

I actually like the 3.27's I can get nearly 60mph outta 1st gear. Thats good for street racing.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 08-26-2003, 02:25 PM   #8
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default

I know I coulda launched it way better, I havnt practiced the launch one bit yet. I am putting 4.10s and a H-pipe and MAF on it.

Skyler
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 08-29-2003, 11:32 AM   #9
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Default

Quote:
Originally posted by tireburner163
4.30's
Thats what i was gonna say
Yea i have 3.27's in a 5.0, imagine that? lol....i like dropping to 2nd at 40mph though and shaking the tires, then again 373's can do that too
good kills.
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
Old 08-29-2003, 04:27 PM   #10
Rev
Registered Member
 
Rev's Avatar
 
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
Default Delete? I have tried to derlete this post.

I have tried to delete this post several times due to an oversite in reading the original topic. It seems I don't have authorization to delete my own post. What gives? Why can't I delete my own mistaken post? 8/28/03 12:00 PM.

If I can edit the post, then I should be able to delete it altogether. 3:00 PM

This pisses me off a little. A response should be able to be deleted. 7:15 PM.

Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi.

O.B.C. #2


'66 coupe

Last edited by Rev; 08-29-2003 at 07:17 PM..
Rev is offline   Reply With Quote
Old 08-30-2003, 06:20 PM   #11
46stang
Registered Member
 
Join Date: May 1999
Location: moorpark ca
Posts: 340
Default

welcome to the cobra club sky!!! I would get 4.30's for that thing. most of the fast na guys run 4.30's or more. 4.10's would still be a big improvement over the stock gears though! are you going to take it to c/bad and see what you can get it to run? does it have a shifter yet? If not get that asap!!!! that T45 doesn't like missed gears! I like the 98's those are nice cars! congrats on the new car and beating up on the lt1!
Leon
__________________
03 sonic blue cobra coupe,

11.49@122mph bakerfield raceway!
11.67@120mph fontana

98 GT, stock for now.
46stang is offline   Reply With Quote
Old 09-01-2003, 09:05 PM   #12
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default

Damn leon you turned 120mph! Thats ******* flying. Yeah Im going to get some 4.10's I am really loving the 3.27s on the freeway though, but I find myself driving too fast most of the time w/ them. I think 4.10's will slow it down. I've gotta sell my 93. But I got an X-pipe w/ cats for my car, a MAF, and some pulleys. So I am going to throw those on and a shifter and hit the track. Do you have some slicks for your car now? I'll letcha know when Im going if you wanna go.

Skyler
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 09-02-2003, 09:30 AM   #13
46stang
Registered Member
 
Join Date: May 1999
Location: moorpark ca
Posts: 340
Default

I have some slicks now. i bought some used ones and put them on some cheap black rims. I'm kind of just waiting for it to cool down to go to the track as it's been so dang hot lately! I've only hit the 119mph once. Most of the passes are in the 116-117mph range. I did just get a big *** accufab throttle body for my car that flows like 1700 cfm or something crazy like that so i'm hoping i can get some more mph the next time i go! The throttle response is awesome now and it definately feels stonger in the sotp. but only the track will tell for sure! let me know when your going next. my new email is

leonschopp@sbcglobal.net
__________________
03 sonic blue cobra coupe,

11.49@122mph bakerfield raceway!
11.67@120mph fontana

98 GT, stock for now.
46stang is offline   Reply With Quote
Old 09-02-2003, 07:09 PM   #14
sedanman
Registered Member
 
Join Date: Feb 1999
Location: Indianapolis, IN
Posts: 963
Default

Nice kill, I love the 96-98 cobra's I am trying to talk my GF into one. So anymore plans for the 5L?

PS get a vortech, exhaust and gears for the 4V and never worry about a camaro again
__________________
04 Screamin Yellow Cobra
KB 2.4 (585/556 pump 626/666 race)
00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff.

GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.
sedanman is offline   Reply With Quote
Old 09-03-2003, 11:54 AM   #15
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default

Yeah, well I am selling the 93 LX, and I am going to continue finishing up making my saleen perfect, before I deciede if I am going to sell it. I definatly want to remove the holley intake, it just kills the lowend on that car. Its hard to let go of the 93, the sucker is so f'kin quick. Sedan, it looks like your blower is working out real good. I want to keep away from putting one on my cobra just for longevity and gas mileage though.

Im going to throw on my x-pipe, pulleys, MAF, and a homemade powerpipe and goto carlsbad saturday.



Skyler
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 09-03-2003, 02:27 PM   #16
sedanman
Registered Member
 
Join Date: Feb 1999
Location: Indianapolis, IN
Posts: 963
Default

Cool, whats the best time for the 93?

Do you feel you loose lowend torque with the holley even with the bottle on, also whats lowend (how low). The reason I ask is I am thinking about doing one in my car, but I think the blower will help make up for the lowend tq.

Be sure to let us know how the cobra runs, and whatever you do don't forget to get gears
__________________
04 Screamin Yellow Cobra
KB 2.4 (585/556 pump 626/666 race)
00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff.

GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.
sedanman is offline   Reply With Quote
Old 09-04-2003, 12:10 PM   #17
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default

I havn't run the 93 yet. It still only has 2.73 gears!! But from the feel, it will probably go near 111-112mph right now, its definatly quicker than my saleen.

I really love the 3.27s in my cobra, I can drive 90-100mph down the freeway soo nicely. I am not sure if I am gonna change em or not. I put on the holley and 1.7 rockers at the same time. It really killed the lowend on my car. It doesnt come on till 4000rpm now, it used to be 2500 w/ the edelbrock and the 1.6's. Im sure it would be way different w/ a blower.

What intake do you have? I want to sell mine still, maybe we could work out a deal. I am in no hurry.

Skyler
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 09-04-2003, 06:00 PM   #18
sedanman
Registered Member
 
Join Date: Feb 1999
Location: Indianapolis, IN
Posts: 963
Default

I have a trick flow trackheat intake now. My power band gets really started around 3500 although its pulling pretty hard at 3000 and the power band goes to 6200 (when I shift).
__________________
04 Screamin Yellow Cobra
KB 2.4 (585/556 pump 626/666 race)
00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff.

GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.
sedanman is offline   Reply With Quote
Old 09-05-2003, 05:18 PM   #19
EZRIDN
Registered Member
 
Join Date: Jan 1999
Location: U.S.A.
Posts: 504
Default

Nice kill man!


Quote:
Originally posted by sedanman

PS get a vortech, exhaust and gears for the 4V and never worry about a camaro again
Unless your in South Florida.
EZRIDN is offline   Reply With Quote
Old 09-06-2003, 07:13 PM   #20
The Deuce
Registered Member
 
The Deuce's Avatar
 
Join Date: Apr 2002
Location: Atlanta, GA
Posts: 2,325
Default

dang it.

I was in Atlanta until basically this morning, and would have hit the track today if I'd seen this before now.

How'd you do.?
__________________
1997 Mustang GT "The Freak" - 13.80 @ 101.70, 2.07 60'
1995 Honda VFR750 - not much @ really fast (actual data pending.)
1964.5 Mustang 289

Rice Haters Club Member #13
The Deuce is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
thinki saw '93 cobra but not sure.....plz confirm this for me(description) yelowjaket Blue Oval Lounge 5 06-09-2003 05:49 PM
What's the difference between 95 GT and 95 Cobra? Ron Brooks Blue Oval Lounge 5 07-13-2001 12:56 PM
2001 Cobra Over Rated AGAIN!!!?!?!!! Wassup Ford? KillaZ350 Blue Oval Lounge 24 06-29-2001 05:24 PM
Cobra Computer Bangin Gears Windsor Power 1 04-30-2001 02:38 AM
Finally got a race! 99 Cobra! exgmguy Stang Stories 7 01-21-2001 02:07 AM


All times are GMT -5. The time now is 11:52 AM.


SEARCH