Looking for that AWESOME sound!!!!

My1stStang · 09-19-2001, 09:23 PM

I am looking to get that awesome mustang sound that you can always tell as soon as you hear it. I have been told that getting Flowmasters welded to the existing pipes is the best way unless you want added performance. Any suggestions?

------------------
2000 GT Stock now, but looking to spend some $$$$

98 NosStang · 09-19-2001, 10:01 PM

you really want to sound good, you should go ahead and do the complete exhaust. headers, x-pipes(huge difference if you get them with no catalytics),and flowmasters.....i have pretty much this setup, it made a huge difference.

------------------
1998 MUSTANG GT 4.6L /Convertible, Automatic. Flowmasters, JBA shorty headers chrome, X-Pipes custom made, 3.73 Gears FMS, 70MM fms T-BODY, BBK cold air induction system W/BBK Filter, 150 SHOT Dry NOS KIT (with the teatherd cord attached to the steering wheel), BBK Fuel Pump, 4-Point HOOKER HEADERS chrome roll bar, STEEDA underdrive pulleys, NEX Racing bucket seats(19 LBS PER SEAT),5-Point harnesses, BLITZ carbon fiber black lite gauges temp. & press.

StoplightWarrior · 09-20-2001, 02:42 PM

If you just want a nice, mean, respectable tone, most aftermarket systems will be fine. For example, on my 2000 GT, I have the magnaflow mufflers welded into stock pipes, and a bassani X-pipe w/cats. It sounds REALLY nice. Not too loud, just a deep tone.

Even if you just shell out ~$200 to get some 2 chamber flows welded into your stock pipes, your car will sound really good! But loud!

------------------
Black 2000 GT Auto
Bassani X-pipe, Magnaflow Mufflers, Steeda Pulleys, K&N Filter. Steeda Weld in Subframes, Strut Tower brace, Sport Springs, Caster/Camber Plates.
Ran Once, 14.52@96.57 with a 1.32 R/T & 2.3 60'!!

Red 1994 Mustang Cobra #4343
Pulleys, Shorty Headers, K&N filter, short throw shifter.

GKSCOBRA · 09-21-2001, 04:03 PM

If you want that deep mustang sound i would go with a Dr. Gas X pipe and some 2 chamber flowmasters....they sound great on modular motors!

------------------
96 cobra all stock 4 now except flowmasters and a saleen wing
13.99 @ 99.16

09-19-2001, 09:23 PM	#1
My1stStang Registered Member Join Date: Sep 2001 Location: Auburn,GA Posts: 25	Looking for that AWESOME sound!!!! I am looking to get that awesome mustang sound that you can always tell as soon as you hear it. I have been told that getting Flowmasters welded to the existing pipes is the best way unless you want added performance. Any suggestions? ------------------ 2000 GT Stock now, but looking to spend some $$$$

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help replacing the "premium" sound ('85)	Draconis	Audio, Security, & Electronics	0	03-22-2004 05:14 AM
My Sound Card is BAD!!	Topless In Texas	Blue Oval Lounge	6	12-27-2002 07:31 PM
Premium sound amp ARRRGH	Chevyguy	Windsor Power	5	03-21-2001 10:09 AM
Strange Exhaust sound	Bangin Gears	Windsor Power	2	03-11-2001 08:34 PM
awesome sound clip, especially for Canadians, INSIDE!	88COBRA	Blue Oval Lounge	3	02-15-2001 02:56 PM

09-19-2001, 10:01 PM	#2
98 NosStang Registered Member Join Date: Aug 2001 Location: MIAMI, FLORIDA, USA Posts: 50	you really want to sound good, you should go ahead and do the complete exhaust. headers, x-pipes(huge difference if you get them with no catalytics),and flowmasters.....i have pretty much this setup, it made a huge difference. ------------------ 1998 MUSTANG GT 4.6L /Convertible, Automatic. Flowmasters, JBA shorty headers chrome, X-Pipes custom made, 3.73 Gears FMS, 70MM fms T-BODY, BBK cold air induction system W/BBK Filter, 150 SHOT Dry NOS KIT (with the teatherd cord attached to the steering wheel), BBK Fuel Pump, 4-Point HOOKER HEADERS chrome roll bar, STEEDA underdrive pulleys, NEX Racing bucket seats(19 LBS PER SEAT),5-Point harnesses, BLITZ carbon fiber black lite gauges temp. & press.

09-20-2001, 02:42 PM	#3
StoplightWarrior Registered Member Join Date: Jun 2000 Location: Nor-Cal Posts: 1,311	If you just want a nice, mean, respectable tone, most aftermarket systems will be fine. For example, on my 2000 GT, I have the magnaflow mufflers welded into stock pipes, and a bassani X-pipe w/cats. It sounds REALLY nice. Not too loud, just a deep tone. Even if you just shell out ~$200 to get some 2 chamber flows welded into your stock pipes, your car will sound really good! But loud! ------------------ Black 2000 GT Auto Bassani X-pipe, Magnaflow Mufflers, Steeda Pulleys, K&N Filter. Steeda Weld in Subframes, Strut Tower brace, Sport Springs, Caster/Camber Plates. Ran Once, 14.52@96.57 with a 1.32 R/T & 2.3 60'!! Red 1994 Mustang Cobra #4343 Pulleys, Shorty Headers, K&N filter, short throw shifter.

09-21-2001, 04:03 PM	#4
GKSCOBRA Registered Member Join Date: Sep 2001 Location: indepedence,ky,usa Posts: 11	If you want that deep mustang sound i would go with a Dr. Gas X pipe and some 2 chamber flowmasters....they sound great on modular motors! ------------------ 96 cobra all stock 4 now except flowmasters and a saleen wing 13.99 @ 99.16