© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
06-27-2001, 02:25 PM | #1 |
The Instigator
Join Date: Jul 2000
Location: So Cal and Houston
Posts: 764
|
California Speedway to open track!!!
Finally someone had the good sense to build another track in the Inland Empire area to make up for the stupid residents of Pomona's mistake. Fontana's track should be up and running by September..I know that is a while off, but I am sure that the track will be better than Carlsbad.
------------------ 90 Honda CRX aka Project Mongoose Estimated Completion: ON STANDBY 84 Toyota Supra: Japanese 6mge installed within two weeks..... High flow cat, two chamber flowmaster, custom 2.5" piping, msd 8.5mm wires. Will have boost before 2002. Have HKS turbo manifold for it..... |
06-27-2001, 07:25 PM | #2 |
Registered Member
Join Date: Aug 2000
Location: santa ana ca
Posts: 1,349
|
Whats the elevation and how far is it from O.C.?
|
06-27-2001, 09:09 PM | #3 |
Addicted to the 5.0
Join Date: Jun 2001
Location: Oxnard, CA. USA
Posts: 117
|
Sounds real good for all of us Southern Californians! Do you have any more details? Do you know if it is a 1/8th mile track or a 1/4 mile? I thought I heard that there was also going to be another track opening that was 1/8th mile but I'm not sure if it is the same place. Let us all know!
|
06-27-2001, 09:23 PM | #4 |
Registered Member
Join Date: Nov 2000
Location: So. Cal.
Posts: 244
|
I heard California Speedway's track is going to be 1/4 mi. temporary track in the parking lot and run the NHRA Street Legals that Pomona did. Supposedly there is info on both their websites
Also heard Irwindale Speedway is opening an 1/8 mi this summer (in fact they tested it this week - looks like it might be a go). They are still awaiting city council approval this month. Drag City is still saying they are going to have their track in Banning. I even heard Big Willy is still trying to bring back to life Brotherhood Raceway (not sure if in Terminal Island or somewhere else). ------------------ 347 (Coast High short block), 279/284 .493/.510, TFS TW, Stealth, 750, Flowtech hdrs, Dr. Gas X, 2 Chmbr Flowmaster, MSD 6AL-Dist.& SS coil, March serpentine pulley system, Art Carr C-4, Currie 9" w/3.55, alum Drv Shft, susp mods, Total Control subframes & tower braces, Trans Am Racing power dual master, 4 wheel disc In a 66 coupe |
06-28-2001, 12:56 AM | #5 |
The Instigator
Join Date: Jul 2000
Location: So Cal and Houston
Posts: 764
|
It is a full 1/4 mile, less than 45 minutes(less than 30 how i drive ) from OC, not sure on elevation though...shouldn't be too different from pomona though....
------------------ 90 Honda CRX aka Project Mongoose Estimated Completion: ON STANDBY 84 Toyota Supra: Japanese 6mge installed within two weeks..... High flow cat, two chamber flowmaster, custom 2.5" piping, msd 8.5mm wires. Will have boost before 2002. Have HKS turbo manifold for it..... |
06-28-2001, 12:59 AM | #6 |
The Instigator
Join Date: Jul 2000
Location: So Cal and Houston
Posts: 764
|
1127 above sea level
------------------ 90 Honda CRX aka Project Mongoose Estimated Completion: ON STANDBY 84 Toyota Supra: Japanese 6mge installed within two weeks..... High flow cat, two chamber flowmaster, custom 2.5" piping, msd 8.5mm wires. Will have boost before 2002. Have HKS turbo manifold for it..... |
06-28-2001, 01:19 PM | #7 | |
Registered Member
Join Date: Aug 2000
Location: santa ana ca
Posts: 1,349
|
Quote:
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors |
|
06-28-2001, 01:48 PM | #8 |
Registered Member
Join Date: Nov 2000
Location: So. Cal.
Posts: 244
|
Fastang
Carlsbad doesn't care. They were suppose to be shut down years ago. There is some big corridor highway to be built through their property. That's why their motor cross track, circle track, and road course are all closed down (or highly shortend). Apparently there is some big feud between the two cities (Carlsbad & Vista) involved over the federal money proposed for the corridor project. There are also citizen groups trying to get the development project stopped. The track is just biding the time making a little extra money till they are closed. When I first went there in the late 80's they were telling us that the track would be closed in a year. When I went the moto crossers used to have the morning, and they wouldn't let the drag racers in until they were all out (about noon or 1). Then in the evening the little cirlce track carts would come in as most of the drag racers were leaving. None of the surrounding buildings were there. The strip mall/gas station on the corner was a weed field and the Carlsbad Raceway property exteded much more from the dragstrip than it does today. Just some info |
06-28-2001, 09:43 PM | #9 |
Registered Member
Join Date: May 1999
Location: moorpark ca
Posts: 340
|
just out of curiosity, does any one know how high the elevation was at Pomona? I would definately like to ckeck this new track out!
------------------ 96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies,Kirban adj.reg.,Pro-m 87,24#inj.,70mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,iat mod, home depot ram air, k@n, 373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter. best et 13.80 best mph 103.3 bfg street tires,bakersfield, ca |
06-28-2001, 11:10 PM | #10 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
Pomona was 800 feet.
How close is this new track, when is it supposed to open? Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.55@107 Motor |
06-29-2001, 12:48 AM | #11 |
Registered Member
Join Date: Nov 2000
Location: So. Cal.
Posts: 244
|
Hey Skyman & others,
Here is a link to California Speedway. It has a story about the street legal setup and proposed dates http://dbserver.iscmotorsports.com/C...?SetInFrames=1 ------------------ 347 (Coast High short block), 279/284, TFS TW heads, Stealth, 750 Holley, Flowtech hdrs, Dr. Gas X, 2 Chmbr Flowmaster, MSD 6AL-Dist.& SS coil, March serpentine pulley system, Art Carr C-4 (Soon to be a Richmond 6 spd, Currie 9" w/3.55, alum Drv Shft, susp mods, Total Control subframes & tower braces, Trans Am Racing power dual master, 4 wheel disc Something up my sleeve In a 66 coupe |
06-29-2001, 01:03 AM | #12 |
The Instigator
Join Date: Jul 2000
Location: So Cal and Houston
Posts: 764
|
It is about 25 minutes from Pomona.....
------------------ 90 Honda CRX aka Project Mongoose Estimated Completion: ON STANDBY 84 Toyota Supra: Japanese 6mge installed within two weeks..... High flow cat, two chamber flowmaster, custom 2.5" piping, msd 8.5mm wires. Will have boost before 2002. Have HKS turbo manifold for it..... |
06-29-2001, 10:06 AM | #13 |
Registered Member
Join Date: Aug 2000
Location: Thousand Oaks, CA
Posts: 396
|
All the Mustangworks guys should go on opening day. Maybe the Mustangworks/Corral/LS-1 brawl?
------------------ 93 GT, CCM long block, GT40P heads, Crane 2031, 1.7 RR's, Moroso cold air, 73mm Vortech, 65mm TB, Cobra intake, 24# injectors, MSD 6AL, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s, B&M Ripper shifter, Black Magic fan |
06-29-2001, 12:51 PM | #14 | |
Registered Member
Join Date: Aug 2000
Location: santa ana ca
Posts: 1,349
|
Quote:
|
|
06-29-2001, 05:44 PM | #15 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
Im up for that... Ill definatly have to be squeezing 150-175 for that day. :-D
Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.55@107 Motor |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Putnam Park Open track Oct. 23rd & 24th | indiana dave | Corner Carvers Delight | 0 | 07-23-2004 08:22 PM |
TONS of new open track event photos | StangFlyer | Corner Carvers Delight | 1 | 05-18-2004 01:14 AM |
Open Track Event Oct. 25th & 26th | indiana dave | Corner Carvers Delight | 0 | 07-14-2003 10:52 PM |
Open track in Southern California | The Deuce | Corner Carvers Delight | 1 | 10-17-2002 12:48 PM |
open track? hell yah!! | yesika32 | Corner Carvers Delight | 1 | 10-07-2002 08:07 AM |