CALLING ALL DRAG RACERS FROM SO-CAL!
 

Lets pick a date in the next month or two and all meet at Carlsbad. Its open every Saturday from 1pm-? We should arrive around 12 though. I want to go, Skyler said that he wants to go. If your up to it post your name and a date and we will all agree on something.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

I'm interested. Where's it at?

------------------
86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s.
**************
Crane 2031 on order

I was just there saturday but it was rained out, take the 5 south to PALOMAR AIRPORT ROAD and make a left. Continue about 2 miles untill you hit BUSINESS PARKWAY and make another left. Drive about 30 yards and make a left on POINSETTIA. Poinsetia is an extremely small street that dead ends where you line up to start the racing.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

hmmm...I might have to make a trip out there.

give me a date and ill be there, allong with the other stang guys from Camarillo.

Inferno, I want you to come! Bring all your turbo imports and show us what you got! Pat Boetticher, pick a date next month or so. Lets pick a date next month so we have time to get ready and DO THIS! Where's Sklyer anyway? He said he was down to go but Im not hearing him. http://www.mustangworks.com/interact...oard/frown.gif Sky, bring your cousins car too.

I've got two guys from work that want to go too. March 10/17/24?

------------------
86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s.
**************
Crane 2031 on order

You know I'm definatly in. My cousins 68 will come too.

Camarillo huh? Some of the street racers out there?

Patrick- What kinda car you driving? I used to race out there a little a while back.

Also I'll try to get that other guy in moorpark from here to come.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

How about the 24th? That should give everyone enough time to tune and prepare. I want to get a set of DR's for this http://www.mustangworks.com/interact...rd/biggrin.gif I know about 15 people with domestics that might be interested too. IS THE 24TH GOOD?

I will be definatly be there...Trekking from Yuma AZ I have to plan my trips...coincidently I already wanted to go that weekend! gates open at 1 pm and races go to 6 pm you want to write MW (mustang works) in that lovly shade of white shoe polish on the rear glass so we know who from here is going to be there?

kick a$$! lately there hasnt been a lot of stangs there...

aww hell I thought you were talking about this month...no matter I will still be there in march, with a few others from yuma!

anyone going to be there feb 24th too? I am going both times regardless so let me know!

by the way, on either date, if you need to do some work on your car that morning let me know, I will sponsor you to get on Marine Corps Base Mirimar and you can use the Auto Hobby shop there...all you need to get on base is license, registration, and proof of insurance..the shop has GREAT mechanics there to offer help/advice and it costs almost nothing!

anything to help a fellow stanger!

------------------
My Mustang


91 LX Conv. 52,000 orig mi. Hurst shifter, 3.55 grs, NOS 150 dry kit, MSD 6al, MSD timing control, malory coil, pullies, fms adj fuel reg, BBK 70mm tb, Pro-m 75mm maf, battery in trunk, JBA shorties, JBA subs, JBA strut tower brc, dynomax "super turbo" 2 1/2 exhaust, FMS billit distrib, Hotchkis lower cntrl arms, MAC Fenderwell cold air kit, off road h pipe.

OH OH OH ME TOO! <raises hand frantically>

I am at USC right now, uncle own Lister Rents in Thousand Oaks... T.O. http://www.mustangworks.com/interact...oard/smile.gif So ANYTIME... but email is better for me, I dont check here too much!

Jason

------------------
1992 LX Hatch
couple of mods...
http://www-scf.usc.edu/~jlister/mustang.htm

Ed, if I get my exhaust and cont arms put in before the 24th of this month I will be there too. In fact I will write mustangworks on my car with my screenname! hope to see you there. Care for any test and tune this month too sky?

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

Sounds good...I am definatly going both times. I dont think all the stuff I just ordered will be installed by feb but it will done by the march date!
Hope to see you there fastang. I will write the same in my window...
if anything freaky happens and prevents me from going I will post and let you know (it would have to be something real major to stop me though!)

I have a 95 performane Red Gt (right now it has primer spots on it pending a paint job that i got screwd out of) I dont acuaslly race at the street races but i go and Hang' with all my buddys. the Location has changed to chuys off the carmen exit in cam..

Give me 2 weeks notice and ill be there!!!
all my buddys drive stangs, a '93, 95cobra, 94gt, 95gt, 94gt.
------------------
PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!!

[This message has been edited by Patrick Boetticher (edited 02-14-2001).]

March 24 - I'll be there. "MW" in the window?

------------------
86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s.
**************
Crane 2031 on order

Patrick: we are going to Carlsbad raceway...not street racing. (you may already know that but your post sounded like you were under that impression...

withamc: I am going to have MW on the back window, and username on drivers quarterwindow (I dont want to confuse the tower, they aren't the sharpest tacks in the box!)

24th happens to be my dads birthday. I'd really like to make it though. I'm definatly going to try.

Fastang. How far south are you from Ventura/SantaBarbara. Ive never been to carlsbad, but I know its a LONG *** drive for me. Maybe we could meet up and caravan on the way down.

Especially the Camarillo guys, I could meet up with them on the way too. That'd be fun.

And if you guys didnt already know, my car is the Red Saleen, so you should be able to tell.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

I had an idea guys. I know quite a few guys from corral go out to carlsbad too. I could get em to meet up there at the same time too, maybe we could do a Mustangworks vs. Corral type of thing?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

MW VS The Corral huh, sounds good, I dont care as long as Im racing. I want to see who inferno brings. If everything falls into place I should have nittos on the rear for march http://www.mustangworks.com/interact...rd/biggrin.gif Expensive *** tires, 125.00 a piece. I would like to meet up and caravan too. That a real good idea. With all the people we bring with us it could get pretty huge! Should I invite the folks at LS1.com too? Pat, your car sounds pretty sweet. Im looking forward to seeing how you run, maybe we could line em up since we both have similar cars?

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

Sounds good to me.

------------------
------------------
95 Blown Cobra
#83 of 4005
:)
------------------

KenI, thats good your in. Whats done to your car besides the blower? Any idea now of what it runs?

This sounds like its gonna be fun!

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

OK, so far we have:
1. fastang (me)
2. withamc
3. inferno (maybe)
4. Patrick Boettichler
5. Skyman
6. ed1371
7. slprlx
8. KenI
Come on folks sign up!

skyman has my email... I can meet up with his group as they come thru LA... or hell I can meet in Thousand Oaks (even tho its the opposite way), but I dunno how much racing I will be doing... this new aod is slow as F^)(*&^*CK compared to my old lx <sob>... never got a chance to run you skyler... oh well.. now you'll win! http://www.mustangworks.com/interact...board/wink.gif

Jason

------------------
1992 LX Hatch <ripped uca out of rear... rip>
1988 AOD GT Midnight Blue
couple of mods...
http://www-scf.usc.edu/~jlister/mustang.htm

Last time I was at Carlsbad I spun my ballancer. The car ran like crap after that. I was only able to run 13.5 @ 108 on street tires. I would like to see it closer to 13 flat.
Its a stock long block with shorties, 65mm Tbody, 80mm MAF, X-pipe w/cats, Vortech Strim 8#,MSD 6AL,3.55s.

------------------
------------------
95 Blown Cobra
#83 of 4005
:)
------------------

Im totaly jealous Ken. http://www.mustangworks.com/interact...rd/biggrin.gif

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

Did everyone recieve the email that I sent out?

I used the email you have registered on MW. If it is no good anymore let me know.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

[QUOTE]Im totaly jealous Ken. [/QUOTE}
Stop it. You'll make me blush.

------------------
------------------
95 Blown Cobra
#83 of 4005
:)
------------------

Sky, send me a personal message here or at pugslyann@hotmail.com Im havin probs with my other one, thanks.

i dont know if any of you remember me but i sold my 90 GT a few weeks ago and i am looking for a sn-95. maybe i'll cruise next time. you still want a dsm sky? i pity the fool. http://www.mustangworks.com/interact...rd/biggrin.gif

------------------
my speed addiction outlet: 90 GT 3.73,s full exhaust, ignition, pullies, and all the other bolt-ons.


my "pimp" ricer: nissan 240 sx SE NISMO POWER BABY!!!!

I know, we are going to calsbad, some on had mentioned they went to the Camarillo Street races, the location has changed...

------------------
PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!!

Hey Pat, whats your car running in the quarter? Does anyone else want to go on the 24th of this month too? Im probably going to go and I know a lot of others who are going too.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

the last time i ran a 15.3 at LACR, so that is about a what a 14.8 corrected... that was just with pulleys so i have no idea what i run now, hopefully allot faster.
Ill try to get i off for this month!!!

[This message has been edited by Patrick Boetticher (edited 02-16-2001).]

RiceKilla- !! I thought you had disappeared man. **** Yeah I still want a DSM, I found a 1990 Talon Turbo for $1500 or best offer in Pomona. (626) area code, that I wanna check out..

Find a stang and come down w/ us.

Patrick- Screw LACR! Thats the worst track I've ever been to in my life. My first run out there I ran 14.3@98mph in 65 degree weather. Second run 13.8@100 and then I said screw it! and I left.
I made low 13's at pomona given 40degrees hotter weather!! So go figure. That track is **** . I lost probably close to 7-8mph on my MPH there.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

I got 2 coming from Yuma... Maybe more...

whats the count now? this is going to kick a$$

OK so the REAL date is MARCH 24TH. My friend with the SS that I posted about is going next week on the 24th of this month and he is bringing a few stangs with him. Anyone else want to go? Maybe you Sky? Lemme know.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

Anyone feel like doing a 65mm to 70mm TB swap just for fun to see how it actually performs at the track?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

Maybe, Bring the TB and tools and I will Bring my car. It might help out my cam, but I have read that it doesnt make much of a difference and can actualy hurt your et if not set up right.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

I definately want to go. I have to work march 24, but maybe I can swap weekends with one of the other guys. I'll know for sure a couple weeks before the 24th. It sounds like fun meeting up with all you Ventura locals and caravaning down.

------------------
96 stang,ported 99 heads, 99 intake, 99 cams, 373's, 70mm t/b, gutted maf, bassani x-pipe w/cats, ultraflow catback,iat mod, home depot ram air, k@n. fms spings, tri-ax shifter.

Ya, I'll be there too. I'm in the Woodland Hills/West Hills/Calabasas area... to give some kind of idea. I might get some more guys to go-- with stangs. Count me in


-Andrew

What are you driving cobra man? Are you going both times or just the MARCH 24th?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more.
13.2@106mph
-Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

Sky, Ive got some good news and some bad, The bad news is that I cant make it next weekend bc I gotta work http://www.mustangworks.com/interact...oard/frown.gif But the good news is that I need new U joints so Im getting an aluminum ds with the good joints http://www.mustangworks.com/interact...oard/smile.gif So next month I will defintely be there ready to run http://www.mustangworks.com/interact...oard/smile.gif

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

Same for me actually, so that turns out fine. The final date is march 24th. I'd like to get everyones current email addresses if the one they have in their registry on here isnt current so we can figure out a way to all meet up on the way down there and caravan.

Hopefully I'll get my race seats and stuff in by then.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more.
13.2@106mph
-Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

Sky, Email me at dymples797@aol.com. Thats my girls address. Im having probs with mine. Or just send me a personal message here. So far we have about 10 people from here plus all the people were bringing. Its gonna be so big were not even going to get a pass in!lol I hope I can get a set of nittos for this too. I should have an aluminum ds, controll arm set, longtubes, flows and nittos installed by this time next month, maybe I will pull a 12 too http://www.mustangworks.com/interact...rd/biggrin.gif (I doubt it)

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

SKYMAN - I assume you'll be coming down the 101, so we'll just figure out a way to hook up as you come thru Thousand Oaks. Trade cell phone #'s or something. I'm looking forward to this - never been to a strip before, just stoplights. How much does it cost to race?

------------------
86 GT, GT40P heads, Crane 2031 installed & waiting on longer pushrods, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s.


[This message has been edited by withamc (edited 02-21-2001).]

I believe its only ten bucks http://www.mustangworks.com/interact...oard/smile.gif

$12 to get in, $10 to race

$22 total for 5 hours at the track

Anyone going to be there this weekend too?

What at rip off! Pomona was cheaper and better!

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

yea but pomona was allways packed http://www.mustangworks.com/interact...oard/frown.gif Shoot i would get to pomona at 6:45am and it would be sold out by 7:00am, when it actually opened, then i wouldnt get to my first race until nearly noon or later. that sucked. I've never been to carlsbad so hopefully it wont be that bad.

------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies, 373's, 70mm t/b, gutted maf, bassani x-pipe w/cats, ultraflow catback,iat mod, home depot ram air, k@n. fms spings, tri-ax shifter.