line lock 2001 gt

[jwmustangin]

Hi, I have a 2001 gt 4.6 mustang that I have just paid off and I am looking / thinking about adding some go-faster goodies to it. As of right now it is a bone dry, straight from the factory gt. I would like to put pipes on it and maybe some gears in the rear. I also wanted to add a line-lock ( locks the front wheels up by trapping brake fluid in the front brake lines so you can lay some serious rubber! ) to it. My question is: Is it possible to add a line-lock to my car and how do I go about doing this. My father has a 1970 mach 1 that is pretty juiced up and he has one on his car. But you have to figure that it is a 1970 model and not a 2001. My car is way different from his ( of course ) because of the traction control, computer technology, and the ABS braking system. My car is also a 5 speed. I have cross-footed the car ( with the traction control off ) and laid some serious rubber down before, but I really don't like the idea of doing it that way. I feel like this task can be done, I just don't know how to go about doing it. I do have some brake bleeding experience, so I could install the line-lock. I dont know where to install it in the line - in front of or behind the ABS sytem - in front of or behind the brake line junction box just after the master cylinder - or wherever! I would greatly appreciate any technical advice you could give me.

Thanks,
Jeff Williams ( user name: jwmustangin )

[SLOW 97]

Unless you are going into serious racing you really don't need one. But they are very useful. The only problem is I don't think the can be used on cars with ABS. All of the line lok kits I've can't be used on ABS cars. There is probably a way to make it work though or someone has to make one for newer cars.