|
Fontana's grand opening.
It opens on the 8th. I thought it was the 9th but its the 8th. I dont know if they run on sunday the 9th or not.
Who's going? Can you make it Sky? As long as my car is done by then Im definitely going. Ed you in? ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors |
the 8th of this month or next? i was told it opens in September.
------------------ 89lx, Edelbrock Performer Heads, Edelbrock performer Intake,Comp Cams Extreme Energy cam, BBK 65mm TB,73mm Mass Air,24lb Injectors,255lph fuel pump,373's,full maximum motorsports suspension system,baer 5 lug conversion with cross drilled rotors, 17x9 cobra "r" rims,JBA shorties,bbk offroad h-pipe,flowmaster w\dumps,underdrive pullies,moroso cold air,275/40/17 BFG Drag radials. (Big Shot coming soon) |
September 8th.
|
Hell yes I am in. Do I still get to race that 11.9 trailer queen?
Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor 1.69 60' |
count me in!!!
------------------ 96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,70mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,iat mod, home depot ram air, k@n, 373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter. best et 13.80 best mph 103.3 bfg street tires,bakersfield, ca |
Yeah, I am in as long as I am available. There is a HUGE training evolution going on then. I will know within a few weeks what my schedule will be.
-ed |
I'm planning on going too.
|
I'm hoping I finally get to run with you guys. I'm trying to finish this @#$$@ 6 speed & hydraulic clutch swap.
------------------ 347 (Coast High short block), 279/284, TFS TW heads, Stealth, 750 Holley, Flowtech hdrs, Dr. Gas X, 2 Chmbr Flowmaster, MSD 6AL-Dist.& SS coil, March serpentine pulley system, Art Carr C-4 (Soon to be a Richmond 6 spd, Currie 9" w/3.55, alum Drv Shft, susp mods, Total Control subframes & tower braces, Trans Am Racing power dual master, 4 wheel disc, 17x8 Torqthrust II's Something up my sleeve ;) In a 66 coupe |
I will definitely be there also. I am going to try to get my friend to come also with his new 01 Bullitt with a Brand new Vortech w/aftercooler kit on it! He took me for a ride in it yesterday and that thing fly's!!! I can't wait!
------------------ 1993 Conv. LX 5.0, Air in the tires, Fuel in the tank, Put the top down, Floor it till it breaks! |
Quote:
gp001 Where in O.C. are you? Why didnt you come to the Thursday night hangout after Giovannis? It got HUGE for a while but the cops raided it 2 weeks ago. I dont know if people are going back yet or not. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors [This message has been edited by fastang (edited 07-31-2001).] |
I think I'll tag along too.
|
Fastang- We rolled through there a few weeks ago and it was all imports. We went and had a coffee and rolled back through and it was imports plus a few Camaros. We've been getting the cars in our little group ready for various outings (like the mountain cruise). I'm still trying to figure out a hydraulic clutch setup that I can fabricate to work with my car. I keep reading about you guys going here and there and would like to hook up with you guys. I did go to the big Carlsbad thing earlier this year (as a spectator http://www.mustangworks.com/msgboard/frown.gif ), but didn't know who anybody was. I saw Sky run his car, but didn't know it was him until after he posted his videos. I had an awesome view of his first run. I was up by the tower (shack). Man did that thing look brutal when he shifted. Sooner or later I'll hook up with you guys
|
You should have come down and talked to some of us! I was wearin my ultra cool MW t-shirt that day...
Irony: Sky: "hey you can make a pass on my slicks if you want!" /me looks at his 5 lug rims...DOH! |
gp001, Lemme know next time your little crew goes out and I'll join ya if its ok with you guys.
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors |
Fastang- To be honest with you, you probably wouldn't want to run with us. I'm the only Ford in the group. Most are F-bodies or Vettes. I have to deal with a lot of anti Ford crap, but then they always say "Oh, but not yours" as I give em the "OH YEA?" look. Most of us will probably be at Fontana so I'll meet up with you there, and who knows maybe you wont find them as obnoxious as I do http://www.mustangworks.com/msgboard/wink.gif We really don't have any cruises or anything planned until Fontana (at least for me- I'm hoping to have all the 6 speed/hydraulic clutch stuff figured out). If we do anything I'll send you a PM or e-mail
|
Yeah, I hear a lot of anti Ford crap too. I just dont let it get to me. I have a decent group of friends with late model F bods as well. Mine are usualy pretty respectable and dont talk **** . Oh well.
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors |
Well, I can't go the 8th but if anyone is going to go on Sunday the 9th I'll go. It's on the schedule.
|
Fastang - You hang around with car guys and they DON'T talk **** ??? Wow, what's that like? Every group of car guys I've ever been around has talked **** . Ya, my friends are the most disrespectful group of azz monkeys I know. Even though most are non-Ford guys, they know their **** and they know how to drive (that's important when they're behind you http://www.mustangworks.com/msgboard/wink.gif ), so they're fun to let hang around me. Our little group is pretty damn funny, but absolutely brutal at times.
Does "Oh Well" mean you don't want to hook up at Fontana? |
gp001, No I meant Oh well about meeting up with you guys whenever you go out. You politely made it seem as though I wouldnt fit in or you wouldnt want me tagging along. I can respect that.
But I defintiely want too meet up at Fontana. I will introduce you to the F bod guys that I hang out with. They know a lot of 5.0 guys and run with them constantly. I dyoed with them. Unfortunatley at the time thy were about NINETY hp ahead of me. But they didnt talk **** at all. Just said positive **** and helped me pick out parts. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors |
when did fontana get a track? I have been gone way to long. Where is at in fontana?
My parents just bought a house in rancho cucamunga they said u can see the califronia speedway from the front yard. I hope it is going to be open in Jan. when i get the hell out of korea and go see them for a couple weeks. I will be there everyday that thing is open. ------------------ 69 428 cobra jet: tons of mods. 97 f-150 5.4 xlt mark III BUCKLE UP. SUCK IT IN. Objects in the mirror are about to disappear... QUICKLY!!!!!! |
| All times are GMT -5. The time now is 03:01 PM. |