Got my truck back..OMG!

1BAD89 · 10-29-2001, 06:18 PM

Well it's been a long time, and the project is finally almost over. I drove my truck for the first time with the new motor. Let me start by saying look at my sig. It's tubbed, roll cage etc...it has a 18.5 inch M/T's tires on the rear. Well I was taking it easy, and just gave it a little bit of gas, and it was like a top fuel dragster! It left huge tire marks, just roasted the tires. I was shocked! I knew the new motor would be strong but..OMG. I took it up to 5,900 once and there is NO doubt with some traction/slicks it'll lift the wheels 3ft+ at the strip. The motor guy, said the motor will turn 7,500rpm easy. So needless to say I'm pumped, taking it wednesday morning to get the exhaust put on. I was going to take some pics to post but the batterys in my digital camera went dead. That always happens when I actually want to take a pic of something important to me. Another thing is I cruised around for 15 minutes and the beast didn't get over 170! Ok, Ok, sorry I'll stop, I'm just sooooo excited.

------------------
-1989 GT, not stock.

-2000 Camaro SS-A4,
13.4's bone stock.

-1989 Chevy S-10, EX. Cab-383(500+hp on motor), tubbed, trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more!

1BAD89 · 10-29-2001, 06:31 PM

Sorry Kevin, I thought I was in Blue Oval. Move me please, ;o)

------------------
-1989 GT, not stock.

-2000 Camaro SS-A4,
13.4's bone stock.

-1989 Chevy S-10, EX. Cab-383(500+hp on motor), tubbed, trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more!

Skyman · 10-29-2001, 11:53 PM

Damn that thing is insane. WHat kinda fuel do you have to run in it?

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

Crazy Horse GT · 10-30-2001, 09:00 AM

hey 1bad89,congrats' send us some pic's later 500+ dammmmm good luck with your toy,see ya. marty

------------------
2000gt black,broke a$$ steet racing

1BAD89 · 10-30-2001, 10:39 AM

Put 5 gallons of 110 in there. For 5 gallons of 110 it cost me $21. ;o\ So I mixed 110 with 93, and sum 6-7+ octane boost. It has a 16 gallon fuel cell, so to fill that up with 110 it would cost me a lil under $70 to fill up one time with it! It has 10.5:1 CR so I think the 110/93 combo will be alright. When I hook up the nitrous I want to have a seperate fuel cell with straight 110+. I can't wait to take this beast to the dyno. It's THE coolest feeling to be buckled in a 5 harness, and a roll cage on your side. See ya guys. ;o)

------------------
-1989 GT, not stock.

-2000 Camaro SS-A4,
13.4's bone stock.

-1989 Chevy S-10, EX. Cab-383(500+hp on motor), tubbed, trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more!

[This message has been edited by 1BAD89 (edited 10-30-2001).]

topless tire fryer · 10-30-2001, 12:25 PM

Hellooo, isn't this Mustangworks.com, not s-10works.com?

Just kidding. Its cool to hear someone actually finish a S-10 with a small block. I've seen a lot of locals slap a 350 in one and never do the followup (tubs, cage, built engine). Good luck at the Dyno and let us know how you do.

------------------
'95 Chrome Yellow GT ragtop, KN filter charger, Dynomax cat back, Accel plugs and wires, Chromed '95 Cobra R's (bought for $19.95, now 2 are warped!).
http://www.mustangworks.com/cgi-bin/moi-display.cgi?1883

10-29-2001, 06:18 PM	#1
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	Got my truck back..OMG! Well it's been a long time, and the project is finally almost over. I drove my truck for the first time with the new motor. Let me start by saying look at my sig. It's tubbed, roll cage etc...it has a 18.5 inch M/T's tires on the rear. Well I was taking it easy, and just gave it a little bit of gas, and it was like a top fuel dragster! It left huge tire marks, just roasted the tires. I was shocked! I knew the new motor would be strong but..OMG. I took it up to 5,900 once and there is NO doubt with some traction/slicks it'll lift the wheels 3ft+ at the strip. The motor guy, said the motor will turn 7,500rpm easy. So needless to say I'm pumped, taking it wednesday morning to get the exhaust put on. I was going to take some pics to post but the batterys in my digital camera went dead. That always happens when I actually want to take a pic of something important to me. Another thing is I cruised around for 15 minutes and the beast didn't get over 170! Ok, Ok, sorry I'll stop, I'm just sooooo excited. ------------------ -1989 GT, not stock. -2000 Camaro SS-A4, 13.4's bone stock. -1989 Chevy S-10, EX. Cab-383(500+hp on motor), tubbed, trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Raced an LS-1 Powered Chicken Truck!	Mercury	Stang Stories	26	02-15-2004 11:54 PM
A couple stangs and a diesel truck	sedanman	Stang Stories	7	06-06-2002 11:38 PM
Time to go back to school.	Unit 5302	Modular Madness	12	04-27-2002 03:46 PM
Got my truck back...OMG!	1BAD89	Blue Oval Lounge	5	11-01-2001 10:28 AM
Ever seen a Chevy 454 SS Truck?	Rebel79	Stang Stories	10	02-26-2001 11:27 AM

10-29-2001, 06:31 PM	#2
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	Sorry Kevin, I thought I was in Blue Oval. Move me please, ;o) ------------------ -1989 GT, not stock. -2000 Camaro SS-A4, 13.4's bone stock. -1989 Chevy S-10, EX. Cab-383(500+hp on motor), tubbed, trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more!

10-29-2001, 11:53 PM	#3
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Damn that thing is insane. WHat kinda fuel do you have to run in it? ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor *332RWHP, 350rwtq*

10-30-2001, 09:00 AM	#4
Crazy Horse GT Registered Member Join Date: Aug 2001 Location: Sale Creek, TN. C. S. A. Posts: 4,652	hey 1bad89,congrats' send us some pic's later 500+ dammmmm good luck with your toy,see ya. marty ------------------ 2000gt black,broke a$$ steet racing

10-30-2001, 10:39 AM	#5
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	Put 5 gallons of 110 in there. For 5 gallons of 110 it cost me $21. ;o\ So I mixed 110 with 93, and sum 6-7+ octane boost. It has a 16 gallon fuel cell, so to fill that up with 110 it would cost me a lil under $70 to fill up one time with it! It has 10.5:1 CR so I think the 110/93 combo will be alright. When I hook up the nitrous I want to have a seperate fuel cell with straight 110+. I can't wait to take this beast to the dyno. It's THE coolest feeling to be buckled in a 5 harness, and a roll cage on your side. See ya guys. ;o) ------------------ -1989 GT, not stock. -2000 Camaro SS-A4, 13.4's bone stock. -1989 Chevy S-10, EX. Cab-383(500+hp on motor), tubbed, trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more! [This message has been edited by 1BAD89 (edited 10-30-2001).]

10-30-2001, 12:25 PM	#6
topless tire fryer All show, some go 4 now! Join Date: Jun 2001 Location: Franklin, NH Posts: 175	Hellooo, isn't this Mustangworks.com, not s-10works.com? Just kidding. Its cool to hear someone actually finish a S-10 with a small block. I've seen a lot of locals slap a 350 in one and never do the followup (tubs, cage, built engine). Good luck at the Dyno and let us know how you do. ------------------ '95 Chrome Yellow GT ragtop, KN filter charger, Dynomax cat back, Accel plugs and wires, Chromed '95 Cobra R's (bought for $19.95, now 2 are warped!). http://www.mustangworks.com/cgi-bin/moi-display.cgi?1883