honda civic tries a flyby - Page 2

inferno · 04-17-2001, 02:43 PM

But won't you miss this site? You said that it was one of your favorites....

------------------
90 Honda CRX aka Project Mongoose
Estimated Completion: 7/1/01
453 horses with a stock head...

84 Toyota Supra
High flow cat, two chamber flowmaster, custom 2.5" piping, msd 8.5mm wires. Will have boost before 2002.
Have HKS turbo manifold for it

.....now to decide on what wheels I am going to order for my T04E......

fastang · 04-17-2001, 03:10 PM

Stng87, when did inferno say anything about being gay? I read the whole thread and cant seem to find him saying anything like that.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

PGkelly · 04-17-2001, 04:17 PM

whoa, i think those stakes are a little high. im going to demand you don't race if the loser can't post here anymore. Both of you seem like cool guys. besides, Inferno is not your average ricer....he is hardcore. i won't say the actual hp rating, but it is up there. you two just calm down, go have your race. i'd rather you raced for pink slips than posting rights. and Inferno, i really don't appreciate your remark about HS students.

------------------
If it ain't broke, make it go faster

AOL: MCVillain45

PGkelly · 04-17-2001, 04:34 PM

[This message has been edited by PGkelly (edited 04-17-2001).]

inferno · 04-18-2001, 11:36 AM

Quote:

Originally posted by PGkelly:
and Inferno, i really don't appreciate your remark about HS students.

You are right...your average HS student is smarter than your average Marine....I don't know why I even made the comparison....

------------------
90 Honda CRX aka Project Mongoose
Estimated Completion: 7/1/01
453 horses with a stock head...

84 Toyota Supra
High flow cat, two chamber flowmaster, custom 2.5" piping, msd 8.5mm wires. Will have boost before 2002.
Have HKS turbo manifold for it

.....now to decide on what wheels I am going to order for my T04E......

04-18-2001, 12:13 PM

Now inferno, you are just making a complete a$$ out off yourself and you're being the biggest b!tch on the whole site, not just to stng87 but to everyone who opposes one of your dumba$$ opinions or comments.

And all your stereotyping of the Marines is so retarded. You don't think it takes some balls to be in the Marines? You don't think you have to have some brains to be a Marine? I won't say you're stupid for saying that, just ignorant. If you don't appreciate the military, then don't b!tch to us about them. We do appreciate them. We realize that our country wouldn't be anywhere near where it is today without them. So enough of your sh!t about that.

I am a high school student. I have actually not been offended by any of your posts. I'm just trying to give you a little friendly advice as to not being as big of a cockk.

------------------
'69 Coupe with 351W
=========================
Edelbrock Performer-RPM intake manifold, Edelbrock Performer-RPM cam, Edelbrock lifters, Edelbrock 750 cfm carb, Accel coil, Moroso Blue-Max spark plug wires, Hedman headers, 2 1/2" pipe, glasspacks, Edelbrock double roller timing chain, Edelbrock valve springs, Flex fan, C4, Lakewood traction bars, 3:1 open rear-9" 3.89:1 posi coming this summer
=========================

fastang · 04-18-2001, 12:40 PM

[QUOTE]Originally posted by inferno:
[B] You are right...your average HS student is smarter than your average Marine....I don't know why I even made the comparison....

Thats too fuckin funny man, you got some balls.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

Kevin Price · 04-18-2001, 12:56 PM

Yes, I must admit, it takes huge balls to spout off a bunch of BS sitting behind the computer.

If this is what "some people" want to do, and obviously have the extra time to spend doing it, by all means go ahead. Do it through your email and quit trashing the boards with this crap.

Check out Dan's post in the Female Power forum if anyone has a problem with this.

------------------
SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle
of giggle gas. My Car

04-17-2001, 02:43 PM	#1
inferno The Instigator Join Date: Jul 2000 Location: So Cal and Houston Posts: 764	But won't you miss this site? You said that it was one of your favorites.... ------------------ 90 Honda CRX aka Project Mongoose Estimated Completion: 7/1/01 453 horses with a stock head... 84 Toyota Supra High flow cat, two chamber flowmaster, custom 2.5" piping, msd 8.5mm wires. Will have boost before 2002. Have HKS turbo manifold for it.....now to decide on what wheels I am going to order for my T04E......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I'm gonna buy me a Honda Civic!	Axman	Blue Oval Lounge	23	06-11-2003 09:44 PM
Honda Dealership - The only place you'll find a stupid Mustang Owner. =(	1969Mach1	Blue Oval Lounge	4	09-21-2002 07:17 PM
Crushed by a Civic!	Blue88	Stang Stories	12	04-08-2002 11:10 PM
civic vs. falcon vs. 65 fastback	tinner	Stang Stories	6	01-02-2002 09:22 PM
Classic stuff from ClubSI....	Hammer	Blue Oval Lounge	2	01-11-2001 10:32 PM

04-17-2001, 03:10 PM	#2
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Stng87, when did inferno say anything about being gay? I read the whole thread and cant seem to find him saying anything like that. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

04-17-2001, 04:17 PM	#3
PGkelly Registered Member Join Date: Feb 2001 Posts: 274	whoa, i think those stakes are a little high. im going to demand you don't race if the loser can't post here anymore. Both of you seem like cool guys. besides, Inferno is not your average ricer....he is hardcore. i won't say the actual hp rating, but it is up there. you two just calm down, go have your race. i'd rather you raced for pink slips than posting rights. and Inferno, i really don't appreciate your remark about HS students. ------------------ If it ain't broke, make it go faster AOL: MCVillain45

04-17-2001, 04:34 PM	#4
PGkelly Registered Member Join Date: Feb 2001 Posts: 274	[This message has been edited by PGkelly (edited 04-17-2001).]

04-18-2001, 12:13 PM	#6
BennyBoy Guest Posts: n/a	Now inferno, you are just making a complete a$$ out off yourself and you're being the biggest b!tch on the whole site, not just to stng87 but to everyone who opposes one of your dumba$$ opinions or comments. And all your stereotyping of the Marines is so retarded. You don't think it takes some balls to be in the Marines? You don't think you have to have some brains to be a Marine? I won't say you're stupid for saying that, just ignorant. If you don't appreciate the military, then don't b!tch to us about them. We do appreciate them. We realize that our country wouldn't be anywhere near where it is today without them. So enough of your sh!t about that. I am a high school student. I have actually not been offended by any of your posts. I'm just trying to give you a little friendly advice as to not being as big of a cockk. ------------------ '69 Coupe with 351W ========================= Edelbrock Performer-RPM intake manifold, Edelbrock Performer-RPM cam, Edelbrock lifters, Edelbrock 750 cfm carb, Accel coil, Moroso Blue-Max spark plug wires, Hedman headers, 2 1/2" pipe, glasspacks, Edelbrock double roller timing chain, Edelbrock valve springs, Flex fan, C4, Lakewood traction bars, 3:1 open rear-9" 3.89:1 posi coming this summer =========================

04-18-2001, 12:40 PM	#7
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	[QUOTE]Originally posted by inferno: [B] You are right...your average HS student is smarter than your average Marine....I don't know why I even made the comparison.... Thats too fuckin funny man, you got some balls. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

04-18-2001, 12:56 PM	#8
Kevin Price Registered Member Join Date: Jan 1999 Location: Oxford, KS Posts: 935	Yes, I must admit, it takes huge balls to spout off a bunch of BS sitting behind the computer. If this is what "some people" want to do, and obviously have the extra time to spend doing it, by all means go ahead. Do it through your email and quit trashing the boards with this crap. Check out Dan's post in the Female Power forum if anyone has a problem with this. ------------------ SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle of giggle gas. My Car