new to fast mustangs but not fast cars...I've a few ?'s

XGN · 07-02-2002, 09:26 PM

Well I'm a former Grand National owner and now own a super fast mustang. Well my stang runs mid 11's on motor leaving off idle with street slicks with straight pump gas. The car has a 347 stroker. What I was trying to figure out if I was to use a power adder would that adversly effect my set up. I was thinking since I was on pump gas with no spark knock there could be room for a power adder if I dont sell the car. What do you guys think? Thanks Anthony.

Skyman · 07-03-2002, 12:13 AM

What do you have done to the car? Give us a list of run down on the mods. What exactly does it run in the 1/4?

You could go nitrous, turbo, or s/c, depending if u have high compression or not

Skyler

302 LX Eric · 07-03-2002, 07:33 AM

Do have the specs on the motor? Things that would be helpful in answering your question are:

- Compression ratio
- Cam specs (lobe spearation, duration, lift)
- Cylinder heads (porting, what they flow, etc)
- Intake
- Etc.

E

XGN · 07-03-2002, 09:40 AM

Sorry for the delay guys but I'm trying to get the specs on the engine.

07-02-2002, 09:26 PM	#1
XGN Registered Member Join Date: Jun 2002 Location: South Carolina Posts: 3	new to fast mustangs but not fast cars...I've a few ?'s Well I'm a former Grand National owner and now own a super fast mustang. Well my stang runs mid 11's on motor leaving off idle with street slicks with straight pump gas. The car has a 347 stroker. What I was trying to figure out if I was to use a power adder would that adversly effect my set up. I was thinking since I was on pump gas with no spark knock there could be room for a power adder if I dont sell the car. What do you guys think? Thanks Anthony. __________________ 1989 coupe

07-03-2002, 12:13 AM	#2
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	What do you have done to the car? Give us a list of run down on the mods. What exactly does it run in the 1/4? You could go nitrous, turbo, or s/c, depending if u have high compression or not Skyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

07-03-2002, 07:33 AM	#3
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	Do have the specs on the motor? Things that would be helpful in answering your question are: - Compression ratio - Cam specs (lobe spearation, duration, lift) - Cylinder heads (porting, what they flow, etc) - Intake - Etc. E __________________ 1991 5.0 LX Coupe - 40,750 miles 331 cu. in. / Tremec 3550 / BFG Drag Radials 12.22 @ 114.31 mph - w/1.89 60'

07-03-2002, 09:40 AM	#4
XGN Registered Member Join Date: Jun 2002 Location: South Carolina Posts: 3	Sorry for the delay guys but I'm trying to get the specs on the engine. __________________ 1989 coupe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
maimi mustangs and fast fords	BRANDS5.0	Blue Oval Lounge	0	04-08-2003 01:20 PM
What do you think will happen to cars in the future	7000rpmisheaven	Blue Oval Lounge	8	05-16-2002 07:55 AM
'Windows' for cars?	srv1	Blue Oval Lounge	3	05-13-2002 03:33 AM
Can my car be beat by modern cars? If so when will they pass me	vetteeatr	Windsor Power	19	05-15-2001 11:30 PM