I can't wait!
 

I can't wait to get my car back tomorrow.

The full roll cage is gettin installed with the nitrous, and all the sound deadening is being removed. I'll finally have it back tomorrow.

Were only going to run a 80shot of nitrous though to start, as my 190pump won't be enough for the 150 shot.

I could never get a race before, now with the roll cage its gonna be even harder!

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 150 shot of N20.
12.55@107 Motor

Hey, post some pics of the cage. I want to see how it looks. Hopefully I'll NEED to put one in soon.

------------------
93 GT, CCM long block, GT40P heads, Crane 2031, 1.7 RR's, Moroso cold air, 73mm Vortech, 65mm TB, Cobra intake, 24# injectors, MSD 6AL, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s, B&M Ripper shifter, Black Magic fan

Sky- I'm curious to see what you run with the bottle.

BTW, What head gaskets are you using?

------------------
1989 lx notch
89,000 miles
bolt-ons,stock heads/cam
60'- 2.07, 8.90@78, 13.93@99

Chris- Lets just get to the track here soon and I'll show it to you.

Im only running a 80shot now cuz of my small 190 fuel pump. When I get a biggewr pump I'll go upto 175.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

I have no idea what gaskets.



------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

Who did you take your stang to to get the cage put in? Also, is it bolted to the floorpanel or through the floor and welded to the subframes?

------------------
92 GT, 4:10 gears, centerforce clutch, 6# powerdyne blower, bbk h-pipe, flowmasters

hey, Sky are you going to have at least 2 or 3 nitrous buttons on your steering wheel like in the movie "fast and furious" http://www.mustangworks.com/msgboard/wink.gif you know those rice cars in that movie are 10 sec. cars and they have 2-4 nitrous buttons, one was even in the cigar lighter! that movie was funny, you'll like it sky, every other word in the script was "NOS", take it easy sky and have fun at the track! hopefully you'll crack an 11.xx http://www.mustangworks.com/msgboard/smile.gif
leon

------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies,Kirban adj.reg.,Pro-m 87,24#inj.,70mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,iat mod, home depot ram air, k@n,
373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter.
best et 13.80
best mph 103.3
bfg street tires,bakersfield, ca

who did the install of the nitrous??? damn thats gonna be one fast car....

------------------
ALL NEW PPG Torch Red 95GT, 304ci block, Forged pistons, Ported Explorer Intake, E-303 cam, fully ported and polished and milled E-7 heads, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, PBR twin piston calipers, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 24# Racing Injectors, AFS 10.5" Cobra R's, Nit

That orange Supra in th movie is actually a 10 second car. www.suprastore.com

I had it done at bottle blown. Its all welded to the floor pans. My subframes werent big enough for that.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

I kinda wish I did get NOS now. Nos it he only compnay with a kit tha thas a Carb #,m so the cops can't give you **** !

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

Cool, can't wait to see some numbers!

Are you going to dyno it with the LS1 guys next week?

Sorry jesse, I forgot to reply to your other post. I was trying to find out how close that brothers place is to me. If its under 70miles. If your gonna go we should go there.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

Well I got it back and its done. After regapping all the plugs and installing an usual 92 octane. http://www.mustangworks.com/msgboard/smile.gif I went out and gave it a try. IM addicted! The nos is great. Even just an 80shot. But I know I gotta squeeze it up more. 125 next.

The roll cage sure makes it a ***** to get in and out though.


------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

Awesome man...that extra power sure is fun...now you just need to find a snack to feed the beast with http://www.mustangworks.com/msgboard/wink.gif

------------------
Dustin
Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

12.3@119

http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg