![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Apr 2001
Location: Olney, Illinois, USA
Posts: 212
|
![]() Ok now that may seem a stupid question and is actaully lol.
What i really want to knwo is more can these cars be made to handle really well and be a good street strip car. Basically i plan on a mid 60's platform wiht newer mustang components such as a mod motor and hopefully a 6 spd someday. Can I make a car that is gonna ride pretty well for this set-up or is there some design problem that will make it impossible to create such a car? I dotn want a new car but I also dotn want a stock 60's stang as my daily driver. I want an old cars class and appearence with the technology of today basically. Help me out guys what do you think? Oh also anyone know where to get some shelby repro parts or ELENOR repro parts? Thanks guys
__________________
!988 GT World Windsor Sr.'s, Harland sharpe rockers, 3.73 gears, pulleys, no ac, hurst shifter, 10:1 pistons, BBK full length headers and H-pipe with flows. Under extensive work for porting and fly cutting to accept my new cam and to match my soon to have systemax intake *DROOL* Best E.T. 13.20 with edelbrock RPM intake and 70mm TB |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Nov 2001
Location: NY
Posts: 299
|
![]() you can do anything you want with the classic mustangs. they make every part imaginable for most models. there was an issue of car craft a couple of months back that had a full detail on the gt500 KR used for "Eleanor". Beleive it or not, she was a real Shelby, not the one they recked obviously. They had part numbers for ervy part you need to make a clone.
__________________
I'm a glutton for punishment. |
![]() |
![]() |
![]() |
#3 |
IRAQ VET
Join Date: Feb 2000
Location: high desert California
Posts: 1,480
|
![]() you can do anything you want with classic mustangs these days. There are lots of places out there that sell new parts for the old mustangs. You can make one handle just as good as any of todays cars. I am going to put in a tubular mustang 2 front suspension with coil overs and the whole bit here this winter. I too love the looks of the old cars there just not as comfortable but the more i look into it the more i find out it is easy to make them out handle even the best of todays cars. Just gotta have the money.
__________________
428 Cobra Jet SOHC 5.4 3V F-150 96 mystic cobra 91 GT |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Jul 2002
Location: El Cerrito, CA
Posts: 2
|
![]() With respect to the engine, I found out from others on another board that you can put multi port fuel injectors on the 289, cost is about $2-3k though. Good luck. I've had both the new ('89 GT Conv) and the old ('66 conv. currently) and prefer the old classic looks but wonder what mult port fuel injection and gatorbacks would be like on my '66. Oh well, maybe you can have the best of both worlds, I can't.
|
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Feb 1999
Posts: 102
|
![]() You can do anything you can afford. The key is research and doing things in an orderly manner. You can put a mod motor in, but it require changing the front suspension so that you can remove the shock towers. You can put in a 6 speed, but you will have to reshape the transmission tunnel. You can put in a Jag independent rear suspension, but you need the frame work to support it. The list goes on and on and the dollars pile up. In the end it will probably cost as much as a new car, but you'll have the styling.
Alternatively, you can take a small step "back" in technology and use a 351W, T5, and 9"rear with good gears and traction lock and have a really quick and reliable car at a much lower cost. Research ![]() Of course even after doing all of that, you will still have a trunk mounted gas tank, no air bags, etc.
__________________
68 coupe, 302 w/ Edelbrock performance parts, T5, 3.55 rear, needs paint! |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Jun 2001
Location: Under the hood
Posts: 164
|
![]() Take it from someone who is putting the new technology into older cars. Updating these old cars can make a great daily driver or a tough racer. In the end it might cost as much to improve an old car as just buy a new one but you can space the improvements out over time to lessen the hit on the wallet. You can't beat the style and character, but they require a little more TLC. It just makes me love it even more (most of the time)
![]()
__________________
65 fastback 347 DFI injected w/vic jr, TFS heads, MSD, cable clutch TKO, 3.70 9", tc subframe conns, custom traction bars, griffen alum radiator, armored fuel cell, and torq thrust D's Retrofitted Prelude seats. Vintage Air underdash kit. Fiberglass here and there too More on the way all the time. |
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
|
![]() You can do all that's been previously mentioned and have a great driver that's very fast and handles well. The only drawback is that you won,t get the money back if you should decide to sell it. I've spent alot on mine and it's a pleasure to drive (for me anyway), but I could never get more than 60-70% of what I've spent (and that's having done almost all of the work myself).
Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe |
![]() |
![]() |
![]() |
#8 |
Registered Member
Join Date: Apr 2002
Location: Atlanta, GA
Posts: 2,325
|
![]() Since everybodys throwing out ideas, the New cammer motors are as wide across as the old big blocks. So if you want to go with a 65-66, use a 351w, like above.
I've heard but never seen, that the new Cobra IRS bolts up fairly well to the pre 69 cars. Mr Shelby was once seen running around in a 64 falcon with IRS, as it was considered for the orginal mustangs. The 302 and T-5 will bolt right in, but you mentioned wanting newer stuff. Figure out what you would like, see if it can be done, then if you can afford to get it done. In the end its your car, so do whatever you want. Just know there will be purists who cry over it if you get too modern or different.
__________________
1997 Mustang GT "The Freak" - 13.80 @ 101.70, 2.07 60' 1995 Honda VFR750 - not much @ really fast (actual data pending.) 1964.5 Mustang 289 Rice Haters Club Member #13 |
![]() |
![]() |
![]() |
#9 |
Registered Member
Join Date: Apr 2001
Location: Olney, Illinois, USA
Posts: 212
|
![]() Ive decided just to use my motor out of my poor car i wrecked since it somehow survived aolong wiht my T-5.
Rebuild the ol T5 and bolt some diffrent heads and am on and put my new victor intake on the beast. I thin i read i can bolt hese right in? If i compeltely take everythign from my msutang will ti really cost aht much for a cnversion? Estimates?
__________________
!988 GT World Windsor Sr.'s, Harland sharpe rockers, 3.73 gears, pulleys, no ac, hurst shifter, 10:1 pistons, BBK full length headers and H-pipe with flows. Under extensive work for porting and fly cutting to accept my new cam and to match my soon to have systemax intake *DROOL* Best E.T. 13.20 with edelbrock RPM intake and 70mm TB |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
jap cars | Ford150orp4x4 | Stang Stories | 17 | 09-15-2004 07:00 PM |
Imports? | Maroon91LX | Blue Oval Lounge | 27 | 04-16-2004 09:01 PM |
Fun Race with Newer GT | SlvrTypeS | Stang Stories | 8 | 09-04-2002 01:08 PM |
Thinking about selling 2 Impractical Cars to Build One! | Mercury | Blue Oval Lounge | 17 | 10-19-2001 06:42 PM |
Old cars that kick new car and FI a$$ | MercDude | Stang Stories | 47 | 01-27-2001 05:22 PM |