Lets get it together SoCal ppl!

[ed1371]

Seems like every time we try to hit the strip, it falls apart! How about Carlsbad on Nov. 3rd?

...gunnin for 13.2

[Skyman]

That gives us plenty of time in advance. That day is clear for me, and Im putting it on the calendar.

As long as my car doesnt break I will be there.


SKYLER

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

Every time you guys have gone in the past, I've only been able to go once, and that was just to watch. HOWEVER, I just put my rebuilt tranny in this past weekend, so I plan on being there pending nothing else craps out on me between now and then.
Semper Fi Ed
Dave

------------------
Dave & Robin 88 GT, T5
306, polished crank, Speed Pro Powerforged pistons, ARP rod bolts, underdrive Crank pulley, Ram Air, 73mm MAF, Xtreme Energy Cam, 3.73's, 1 5/8 unequal length headers, Offroad H-pipe, 2 chamber flowmasters, turn-downs, King Cobra Clutch, Steeda adjustable clutch cable with firewall adjuster, 190lph fuel pump

[ed1371]

Good to hear your car is back up dave, Smith wrecked his stang a while ago coming back from street races out here in Yuma!
Hope we get quite a few going this time!

-ed

...begging for 13.2's!

[MMLX]

I am game, I am looking for 12.4 I need to learn how to launch this thing. Hope to see you guys out there

------------------
89lx, Edelbrock Performer Heads, Edelbrock performer Intake,Comp Cams Extreme Energy cam, BBK 65mm TB,73mm Mass Air,24lb Injectors,255lph fuel pump,373's,full maximum motorsports suspension system,baer 5 lug conversion with cross drilled rotors, 17x9 cobra "r" rims,JBA shorties,bbk offroad h-pipe,flowmaster w\dumps,underdrive pullies,moroso cold air,275/40/17 BFG Drag radials.
(Big Shot coming soon)

[Skyman]

Can you post your current email addresses so we can make a collection and keep this all co-ordinated. There are a lot of So-cal guys on here, it'd be fun if we could all cruise down together.

MMLX- Our cars should be a good race. What kinda tires are you running?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

[fastang]

Im down as long as Sky lets me use his slicks

------------------
95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.

[MidNiteBlu 5.0]

Hey MMLX where are you in San Diego? Are you a member of the mustang club? Also how do you like your jba headers?

Thanks
Nick

------------------
'89 LX Hatchback 5spd, Flowmasters, K+N, B+M Ripper shifter, Ford Racing 10.5" Clutch, Kick a** stereo coming soon!

[Skyman]

Jesse- I'll letcha have 2 passes on em !

Sky

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

[fastang]

Cool, Can you tell me how tall and wide they are? And are they 5 lug? Thanks.

------------------
95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.

[Skyman]

They are 5 lug, and 26x10

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

[fastang]

Sounds great...I just hope the backspacing works OK. Im really looking forward to this. I think Im gonna suprise you.

------------------
95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.

[MMLX]

Midnight-I am in escondido, didn't know about any local clubs, heard of SVT Crew when I had my vorteched 97 Cobra, but never got involved.

Sky- As far as tires I am running BFG drag radials, I have to leave at idle and I still spin through 2nd, maybe I can get some slicks before the 3rd. If you are running 12.5 on the motor you will smoke me, I ran a 12.6 on the bottle only squeezing after 2nd gear. with slicks it might be interesting. my E-mail is Boomer3381@aol.com keep me posted.

------------------
89lx, Edelbrock Performer Heads, Edelbrock performer Intake,Comp Cams Extreme Energy cam, BBK 65mm TB,73mm Mass Air,24lb Injectors,255lph fuel pump,373's,full maximum motorsports suspension system,baer 5 lug conversion with cross drilled rotors, 17x9 cobra "r" rims,JBA shorties,bbk offroad h-pipe,flowmaster w\dumps,underdrive pullies,moroso cold air,275/40/17 BFG Drag radials.
(Big Shot coming soon)

DAMIT, sorry gents but I just found out that's the day of our Marine Corps Ball here. I have to backout on yet another one.
Dave

[MidNiteBlu 5.0]

Hey MMLX, you could probably join the san Diego Mustang Club. It has lots of people from San Diego and North County. There are lots of people with late models in the club. My dad is the newsletter editor who owns a '69 428 Cobra Jet. The club is lots of fun. Anyways...

later, Nick

------------------
'89 LX Hatchback 5spd, Flowmasters, K+N, B+M Ripper shifter, Ford Racing 10.5" Clutch, Kick a** stereo coming soon!

SYSTEM OF A DOWN rules!!

Change of plans. I'm back in, assuming I find and fix this current electrical problem in the windsor forum.
Dave

[This message has been edited by D&R Stang (edited 10-23-2001).]

[Skyman]

My Starter went out, but Im gettin it fixed.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

[fastang]

Sky, what nitrous kit are you running? What do you think of the Compucar kit because they are real cheap and Im considering getting one.
Im not sure if I trust it though. Its a dry kit that places the nozzle before the MAF so the cold nitrous charge hits the maf causing the cpu to add more fuel. Im just not sure if I trust it. I really dont like dry kits in general except for the ZEX kit.

------------------
95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.

[ed1371]

Seems like we are going to have a good turnout. Rally point can be the rice king to the left of the track up on the hill @ 1200

-ed

[Skyman]

I have a nitrous works wet plate kit. I bought it used for 300bux. Its been working great so far, I have no complaints.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq