© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
04-01-2002, 08:53 PM | #1 |
Registered Member
Join Date: Apr 2001
Location: draper,va,us
Posts: 206
|
me vs carbd 5.0
well this friday at test and tune im gonna run my buddy its only and 8th mile but he has been talkin mad trash about his car which should beat with no problem at all i admit, but i want some other opinions,he has a 5.0 with gt 40p heads not sure what kind of intake,eldelbrock 600 carb it think he said and a holly intake, its bored to 306 with forged flat tops and not sure about the cam, 410 gears, well he took me down the road and it feels like its got lots of bottom end but honestly my car feels faster, i know that sounds stupid but thats just how i feel,i have a 98 gt with 373 gears c&l 80mm maf kit,offroad h and flowmaster cat back,steeda tri ax,he should blow me away but i honestly think my car feels faster, yeh i know big difference in faster and feels faster but just give some opinions.... thanks guys
__________________
1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock |
04-01-2002, 10:59 PM | #2 |
Registered Member
Join Date: May 1999
Posts: 5,246
|
If it's tuned right, and not mismatched, he's going to destroy you. Sorry, but you're talking maybe a full second or two difference between the cars in the 1/4.
If he's got a poor cam choice, and it's not tuned right, you could win, but who knows until you run him. If your car feels faster, I would guess his isn't quite right. Fox 5.0's feel much faster than the SN95, and to top it off, his combo should be faster too. |
04-02-2002, 12:09 AM | #3 |
Registered Member
Join Date: Apr 2001
Location: draper,va,us
Posts: 206
|
fox 5.0s
has anyone else here noticed that second gear in mostly stock 87 up 5.0s seems to suck *****, maybe its just me but i have had a couple and for some reason in both i just felt like there not much there, i know that has nothing to with the race and dont make alot of since but i was just curious if anyone else thought the same thing
__________________
1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock |
04-02-2002, 12:15 AM | #4 |
Registered Member
Join Date: Apr 2001
Location: draper,va,us
Posts: 206
|
1 more thing
hes got a 100 shot on there to but he aint gonna use it and his car always smells like its running way rich,everytime i get out of the thing i smell like half burnt gas lol, maybe whoever hooked up the nos was tryin to play it safe but i dunno, just thought i would mention that
__________________
1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock |
04-02-2002, 01:01 PM | #5 |
Registered Member
Join Date: Mar 2002
Location: EAST COAST
Posts: 133
|
my boys 98 cobra runs real rich and has N2O and it runs real rich, but still manages 11.7 on motor..... so don't let that be your gouge. just a thought.
|
04-02-2002, 02:21 PM | #6 |
Mustang Addict
Join Date: Jan 2001
Location: McKinney, TX
Posts: 1,294
|
Your impression of 2nd gear in a 5.0 is probably due to the shape of the power curve - stock 5.0s make a ton of low end and midrange compared to the 4.6 but don't make their peak power up as high as the mod motor. When my '00 GT was stock some 5.0s would pull me slightly early on in 1st and then I would pass them in 2nd.
__________________
Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s |
04-02-2002, 07:36 PM | #7 |
Registered Member
Join Date: May 1999
Posts: 5,246
|
My mostly stock 5.0 has no problems with 2nd or 3rd gear pulls. I've got 2.73's in back, and if my clutch isn't acting up, it will kick the back end on a 2-3 powershift.
I pull LT-1's in 1,2, and 3, they get have a bit more once I go to 4, but since that's around 115-120mph, it's more of an aerodynamic thing. |
04-03-2002, 05:02 PM | #8 |
Registered Member
Join Date: Apr 2001
Location: draper,va,us
Posts: 206
|
update on heads
well come to find out that the heads on his car are just slightly worked stock 87's cause it was made from an 87 5.0,pistons are cast flat tops and its bored 40 over,the rearend came out of a ford ranger, this car was pieced together by the way lol, he traded an s10 with a 350 for it straight up,it has the stock headers if thats what you want to call them on it still too... does this make my chances any better?
__________________
1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock |
04-04-2002, 12:04 AM | #9 |
Registered Member
Join Date: Nov 2001
Location: SanAntonio, Tx
Posts: 734
|
Thats funny, 2nd gear is my sweet spot, its 3rd that feels slow to me, and thats where an ls1 begins walking me, ever notice a modded mustang with, say 150 shot, heads and cam, usually can dangle the wheels through all of 1st, and halfway through 2nd, depending on gearing and tires.
watch those carb setups, they can have mad topend if tuned properly. and efi cars can feel faster sometimes, the carbed cars dont alway feel as responsive, my friends 347 650 carb, feels about as fast as my car on the street, but runs low 12's it makes alot of topend, prolly due to the vic jr. intk. he will rape me...
__________________
Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph |
04-04-2002, 01:06 PM | #10 |
Registered Member
Join Date: Apr 2000
Location: Edmonton,Alberta,Canada
Posts: 317
|
Alot of people underestimate what carbed cars can do. Before i got my engine done i was going around with the old 4 speed and the original 302 which had quite a few miles on it. and i could run right with fuelie 5.0's. This may not sound like a big accomplishment but i was running ith 3.08 gears and he was running 3.55's. And when tuned right carbs can make mad power. Im just waiting to find a chassis dyno to run mine with the new engine.
|
04-04-2002, 06:14 PM | #11 |
Registered Member
Join Date: Apr 2001
Location: draper,va,us
Posts: 206
|
we couldnt wait
well we did a quik lil run at the local backroad straight away and he did alot of spinning and i had 3 car lengths on him by the time i let off at 85, good thin he didnt spray me hehe, now we just gotta see what happens at the track tommorow hehe
__________________
1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock |
04-04-2002, 08:20 PM | #12 | |
Registered Member
Join Date: May 1999
Posts: 5,246
|
Quote:
So while carbed cars can make good power, the combo you suggest as being a fuelie competitor is a joke. |
|
04-04-2002, 11:12 PM | #13 |
Registered Member
Join Date: Apr 2000
Location: middleburg, fl, usa
Posts: 1,134
|
That is cool that you won the little test run but I would not let how a car feels make you think you would win. I changed my intake from a vic jr. to a performer rpm and it feels a lot faster with the performer rpm but when we took it to the track it actually ran 1 mph faster and the same e.t. as the performer rpm with the vic jr.
I think it has a lot to do with the power curve. It sounds like you will take him on the track as long as he does not spray you.
__________________
James Cox RHC Member #44 nochevy@hotmail.com 1991 Mustang LX Dart iron eagle block, 4340 28oz 347 crank, 4340 h-beam rods, probe ultra light pistons canfield heads “race ported by Brent Frazier”, solid roller cam and lifters “custom grind”, kooks 1 7/8" race headers, and much more. Engine built by Brent Frazier. |
04-05-2002, 02:24 AM | #14 |
Registered Member
Join Date: Aug 2001
Location: Ft. Worth, TX
Posts: 456
|
Sounds like a traction thing...
If he hooks up, I think he will beat you. Spinning through 3rd gear is no way to win a race. Hope you kick his A#@ anyways.
__________________
You're gonna need your seatbelt |
04-06-2002, 01:00 PM | #15 |
Registered Member
Join Date: Apr 2001
Location: draper,va,us
Posts: 206
|
the track
well fellas,i wish could tell ya what happened but by the time i got to the track he had already trashed his transmission running on the happy gas,he said he trashed it on the first run of the day goin from first to second...i was kinda bummed out but as soon as he gets it we are goin back,im gonna help him pull it and swap it out we have a spair rebuilt t5 at the garage so its gonna be a long sunday lol, but i will keep you guys posted
__________________
1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock |
04-06-2002, 09:12 PM | #16 |
Registered Member
Join Date: Feb 2001
Location: Brooklyn originally, but Grand Rapids now
Posts: 309
|
UNIT5302, didnt they offer the 4bbl HO package.....he could have the 4bbl. either way they did only make 170 something with the 4bbl
my dad has an 82 but he ripped out the 302 and dropped in the 351W crate motor 400 hp. its full drag car now with a moser 9inch rear with 4.30 gears...... best is 12.30@??? id have to get the slips
__________________
Grand Valley State University Senior Accounting and Finance Major 1985 Mustang GT 19,000 ORIGINAL miles, E-303 cam, edelbrock performer RPM intake, holley 600 cfm carb, MAC headers, windage tray, 8.8 rear end with 4.10 gears, 4"cowl hood, 5lug conversion, 04 Mach1 wheels. http://www.mustangworks.com/cgi-bin/moi-display.cgi?1501 |
04-06-2002, 10:08 PM | #17 |
Registered Member
Join Date: May 2000
Location: Everett, MA
Posts: 417
|
Why don't you get a nitrous system so both of you can run each other heads up, on the bottle.
|
04-07-2002, 12:44 AM | #18 | |
Registered Member
Join Date: May 1999
Posts: 5,246
|
Quote:
So to make a long story short, he had the 369cfm 2bbl, and a whopping 157hp. |
|
04-07-2002, 06:01 PM | #19 | |
Registered Member
Join Date: Apr 2000
Location: Edmonton,Alberta,Canada
Posts: 317
|
Quote:
|
|
04-07-2002, 09:46 PM | #20 | |
Registered Member
Join Date: May 1999
Posts: 5,246
|
Quote:
The EFI cars dominate the carb cars in torque, dispite it not meaning anything to a properly setup car anyway. 86 and 93 had 285lb/ft, and 87-92 made 300lb/ft. Last edited by Unit 5302; 04-07-2002 at 09:54 PM.. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MSD HEI for carbd 302 | RoushRacing6N17 | Windsor Power | 3 | 02-01-2004 11:00 PM |
carb'd 1985 block fit? | rustang girl | Classic Mustangs | 6 | 08-04-2002 06:45 AM |
anyone here ever done a EFI to carb'd 351W swap? got questions. | ricekilla | Windsor Power | 0 | 03-03-2002 01:45 PM |
Failed Emissions test with carb'd '85 - what to do? | autoX | Windsor Power | 10 | 02-23-2002 05:58 PM |
Carb'd modular | crewzin | Modular Madness | 3 | 10-05-2001 08:04 PM |