The mofo MOVES

fastang · 08-24-2001, 08:13 PM

Im sure most of you remember my post about racing my co-workers LS1 Z28 with 410's on the 8th for 50 bucks.

Well, He got it all dialed in and tuned up and took me for a run today. The mofo moves....its fukn quick. I figured that he would spin like hell when he hit second but he got some cpu deal that adjusts his shift softness and now it doesnt spin at all.

I hope to god these TW heads and Holley intake drop over a second off of my time or Im gonna be in trouble

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

90dpscoupe · 08-26-2001, 01:45 AM

lol, yea i heard all about those cpu tranny things, oh and did you get some ported tw heads? if not you should, i know its expensive, but good to have when your running against a car with mad topend, and more cubic inches.

my friend is getting stage 3's, but already runs 108 mph traps with ported stockers.

no doubt those cars are fast.

ed1371 · 08-26-2001, 02:08 AM

Good luck man, those things are damn quick...seen more than a couple run 13.2 - 13.4 stock at the track... It's all about traction (you saw that at carlsbad) so make sure you can put the power to the ground!

-ed

Skyman · 08-26-2001, 10:03 PM

Cut a 2.0 60' and get it tunned and you'll whoop him.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

fastang · 08-27-2001, 12:22 AM

I think I went a little overboard before. Im going to need to gain over a half second not a full second to beat him. Its quick but I think its in the 13.5-13.4 area now. He hit a 13.8 stock. Im hoping to hit a 13 flat or better.

90dp, I didnt get them ported. I was going to but the guy at the shop that I bought the heads from said that I really wouldnt need it. He said that if I just port matched them to the intake they can support around 400hp. So I saved the money from porting the heads and got the more expensive Holley intake instead.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

gp001 · 08-27-2001, 10:38 PM

Fastang,
I posted the following reply to your original thread. I think he may be faster than mid 13's. Here is my original post:

OK, just want to give you some first hand info I have. One of my buds has a 00
Camaro SS with auto trans. He has the following mods:
Eibach Lowering Springs - 1 1/2 inch drop
LS1 Motorsports - Ram Air Lid
K&N - Airfilter
Hypertech Power Stat - 180 Degrees
Hypertech Power Programmer - Programmed to the following....
Firmed Shift 75%
Installed RFG
Cooling Fan set for 180 Degree
1-2 Shift +2
2-3 Shift +2
Rev Limiter 6,300

he runs 13.2 all day long. His best time (at carlsbad) was 13.15 @ 106.57. Just lettin you know. Good luck and kick *** !

90dpscoupe · 08-28-2001, 12:17 AM

Thats cool, the holley intake should be well worth the money, and if its port matched, your in good shape, man i bet your car would really love some 4.10's but i think i remember you saying about you liking to drive 80-90 on the highway without it screaming

like me.

spank that guy...good luck.

But any heads and cam 5.0 will give an f-bod a run for their money, modded or not.

------------------
90 lx coupe: 5spd, 177k miles, steeda water pump pulley, Mac coldair fenderwell, Mac h-pipe, supercoil, ADS chip, 160 stat, aluminum D/S, Black magic fan, 3.27grs.
Best time: 13.9116(on 225/60/15 firehawks)
Best mph: 98.17
Best 60': 1.9607

next mods:4.10's, slicks.

08-28-2001, 01:38 PM

With the heads/intake and a good launch, I don't think you'll have that much of a problem w/ that guy.

------------------
'90 LX 5.0;12K original miles (no sh*&);3.55 gears; March pulleys;Edelbrock Performer Heads;BBK 1 5/8" equal length shorties;MSD 6AL ignition w/ blaster 2 coil;FMS E303 cam;Pro-M 75mm MAF;BBK 70mm TB; Eibach drag-launch spring kit;Southside welded subs;9" K&N cone filter charger;Hurst shifter;Cervini's 3" turbo hood;A/C delete; gutted cats;2 chamber Flomasters;Corbeau racing seats;FMS 30# injectors;JMS chip; Holley 190lb fp;TFS track heat Intake (12.299 @ 113 - 1.78 60')

fastang · 08-28-2001, 06:57 PM

I think I will be able to take him. If I get everything put on by the 8th I know Im not going to be able to get it dyno tuned by then though

gp0001, thanks for the input. I also have a friend with a quick SS. His is an M6 with just cutouts, MAF, and a lid and he's hitting 12.9 @ 110 on a 2.3 60ft

But this guys car just isnt as fast. I've been in it and even at Pomona its best run was a 13.8.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

302 LX Eric · 08-29-2001, 08:39 AM

fastang - Those newer Z28's are just weird...let me elaborate. I have said this before (and will say it again here

), I have seen bone stock Z28's (00's) run consistent 14.0's all day (auto) and another run 13.4's (also an auto). You really don't know what you're getting with one of these cars. That's why it's always to fun to watch these cars at the track.

Another quick experience - a sligthly modded 00 Z28 with exhaust, LID, and a few other goodies I can't seem to remember, was going 12.9's @ 108 on drag radials with 1.9 & 2.0 60's.

Regardless, have fun and good luck. I personally think with some good shifting and a decent 60' you will take him

E

1BAD89 · 08-31-2001, 03:18 PM

With the heads and intake I see no problem in you getting some 12 second timeslips. I'm running my SS at the track tonight. I'm guessing 13.5's.

------------------
1989 GT, 3:55's, full exhaust, 4 in. hood, Pro 5.0, Have many other parts 4 sale. All parts for sale now.

2000 Camaro SS-A4 =P

1989 Chevy S-10, EX. Cab-383(500+hp on motor), trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more!

http://www.geocities.com/i8urvpr/JM.html

302 LX Eric · 08-31-2001, 03:36 PM

Good luck, 1BAD89, I'm curious to see your results.

Do you have any mods on the SS?
E

------------------
1991 5.0 LX Coupe - 38,000 miles

13.17 @ 106.14 mph w/ 2.138 60'

fastang · 09-01-2001, 08:37 PM

Yeah, 1BAD89, whadya run?

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

08-24-2001, 08:13 PM	#1
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	The mofo MOVES Im sure most of you remember my post about racing my co-workers LS1 Z28 with 410's on the 8th for 50 bucks. Well, He got it all dialed in and tuned up and took me for a run today. The mofo moves....its fukn quick. I figured that he would spin like hell when he hit second but he got some cpu deal that adjusts his shift softness and now it doesnt spin at all. I hope to god these TW heads and Holley intake drop over a second off of my time or Im gonna be in trouble ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How Much QA1 K member Moves Front tires forward	87BOSS351C	Windsor Power	1	02-04-2003 07:02 PM
Modular Shootout moves venue to new location for 2003.	Moonlight96GT	Blue Oval Lounge	0	08-01-2002 06:01 PM
Got myself a new LIZARD!	Lizard King	Blue Oval Lounge	13	03-28-2002 03:13 PM

08-26-2001, 01:45 AM	#2
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	lol, yea i heard all about those cpu tranny things, oh and did you get some ported tw heads? if not you should, i know its expensive, but good to have when your running against a car with mad topend, and more cubic inches. my friend is getting stage 3's, but already runs 108 mph traps with ported stockers. no doubt those cars are fast.

08-26-2001, 02:08 AM	#3
ed1371 Registered Member Join Date: Feb 2000 Posts: 469	Good luck man, those things are damn quick...seen more than a couple run 13.2 - 13.4 stock at the track... It's all about traction (you saw that at carlsbad) so make sure you can put the power to the ground! -ed

08-26-2001, 10:03 PM	#4
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Cut a 2.0 60' and get it tunned and you'll whoop him. Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor *332RWHP, 350rwtq*

08-27-2001, 12:22 AM	#5
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	I think I went a little overboard before. Im going to need to gain over a half second not a full second to beat him. Its quick but I think its in the 13.5-13.4 area now. He hit a 13.8 stock. Im hoping to hit a 13 flat or better. 90dp, I didnt get them ported. I was going to but the guy at the shop that I bought the heads from said that I really wouldnt need it. He said that if I just port matched them to the intake they can support around 400hp. So I saved the money from porting the heads and got the more expensive Holley intake instead. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

08-27-2001, 10:38 PM	#6
gp001 Registered Member Join Date: Nov 2000 Location: So. Cal. Posts: 244	Fastang, I posted the following reply to your original thread. I think he may be faster than mid 13's. Here is my original post: OK, just want to give you some first hand info I have. One of my buds has a 00 Camaro SS with auto trans. He has the following mods: Eibach Lowering Springs - 1 1/2 inch drop LS1 Motorsports - Ram Air Lid K&N - Airfilter Hypertech Power Stat - 180 Degrees Hypertech Power Programmer - Programmed to the following.... Firmed Shift 75% Installed RFG Cooling Fan set for 180 Degree 1-2 Shift +2 2-3 Shift +2 Rev Limiter 6,300 he runs 13.2 all day long. His best time (at carlsbad) was 13.15 @ 106.57. Just lettin you know. Good luck and kick *** !

08-28-2001, 12:17 AM	#7
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	Thats cool, the holley intake should be well worth the money, and if its port matched, your in good shape, man i bet your car would really love some 4.10's but i think i remember you saying about you liking to drive 80-90 on the highway without it screaming like me. spank that guy...good luck. But any heads and cam 5.0 will give an f-bod a run for their money, modded or not. ------------------ 90 lx coupe: 5spd, 177k miles, steeda water pump pulley, Mac coldair fenderwell, Mac h-pipe, supercoil, ADS chip, 160 stat, aluminum D/S, Black magic fan, 3.27grs. Best time: 13.9116(on 225/60/15 firehawks) Best mph: 98.17 Best 60': 1.9607 next mods:4.10's, slicks.

08-28-2001, 01:38 PM	#8
bada$$lx Guest Posts: n/a	With the heads/intake and a good launch, I don't think you'll have that much of a problem w/ that guy. ------------------ '90 LX 5.0;12K original miles (no sh*&);3.55 gears; March pulleys;Edelbrock Performer Heads;BBK 1 5/8" equal length shorties;MSD 6AL ignition w/ blaster 2 coil;FMS E303 cam;Pro-M 75mm MAF;BBK 70mm TB; Eibach drag-launch spring kit;Southside welded subs;9" K&N cone filter charger;Hurst shifter;Cervini's 3" turbo hood;A/C delete; gutted cats;2 chamber Flomasters;Corbeau racing seats;FMS 30# injectors;JMS chip; Holley 190lb fp;TFS track heat Intake (12.299 @ 113 - 1.78 60')

08-28-2001, 06:57 PM	#9
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	I think I will be able to take him. If I get everything put on by the 8th I know Im not going to be able to get it dyno tuned by then though gp0001, thanks for the input. I also have a friend with a quick SS. His is an M6 with just cutouts, MAF, and a lid and he's hitting 12.9 @ 110 on a 2.3 60ft But this guys car just isnt as fast. I've been in it and even at Pomona its best run was a 13.8. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

08-29-2001, 08:39 AM	#10
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	fastang - Those newer Z28's are just weird...let me elaborate. I have said this before (and will say it again here ), I have seen bone stock Z28's (00's) run consistent 14.0's all day (auto) and another run 13.4's (also an auto). You really don't know what you're getting with one of these cars. That's why it's always to fun to watch these cars at the track. Another quick experience - a sligthly modded 00 Z28 with exhaust, LID, and a few other goodies I can't seem to remember, was going 12.9's @ 108 on drag radials with 1.9 & 2.0 60's. Regardless, have fun and good luck. I personally think with some good shifting and a decent 60' you will take him E

08-31-2001, 03:18 PM	#11
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	With the heads and intake I see no problem in you getting some 12 second timeslips. I'm running my SS at the track tonight. I'm guessing 13.5's. ------------------ 1989 GT, 3:55's, full exhaust, 4 in. hood, Pro 5.0, Have many other parts 4 sale. All parts for sale now. 2000 Camaro SS-A4 =P 1989 Chevy S-10, EX. Cab-383(500+hp on motor), trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more! http://www.geocities.com/i8urvpr/JM.html

08-31-2001, 03:36 PM	#12
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	Good luck, 1BAD89, I'm curious to see your results. Do you have any mods on the SS? E ------------------ 1991 5.0 LX Coupe - 38,000 miles 13.17 @ 106.14 mph w/ 2.138 60'

09-01-2001, 08:37 PM	#13
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Yeah, 1BAD89, whadya run? ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors