Stock 95 GT vs 15 second Neon....

Shotgun28 · 03-31-2001, 02:13 AM

Well I usually don't ask silly little posts in here, but I have a friend who has a 15 second flat 1/4 Neon, what is the stock 1/4 for a 95 GT with manual? I am a huge emthusiast for Mustangs and domestic compact ( Focus,Neon, etc) and I was just curious. Thanks guys, and please no teasing, I wasn't going to post this for that reason alone..smiling

------------------
91 LX Convertible Gray on Red B&M Shift improver kit,ASP red alum. underdrive pulleys, Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip,GT40 P heads, looking at new exhaust, Lentech Street Terminator plus.

NOS_Notch · 03-31-2001, 10:13 AM

That could actually be a close run. if the neon is 15 flat he races it and might have a decent tire...or sprays it and will have traction out of the hole. The stang will spin but should still be good for high 14's to mid-15's depending on the driver.
w/ a tire on the stang.....no problem.
Of course...was that 15.0 on a slick...now the neon is on street tires???

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com

03-31-2001, 02:13 AM	#1
Shotgun28 Registered Member Join Date: Sep 2000 Location: New Hope MN USA Posts: 276	Stock 95 GT vs 15 second Neon.... Well I usually don't ask silly little posts in here, but I have a friend who has a 15 second flat 1/4 Neon, what is the stock 1/4 for a 95 GT with manual? I am a huge emthusiast for Mustangs and domestic compact ( Focus,Neon, etc) and I was just curious. Thanks guys, and please no teasing, I wasn't going to post this for that reason alone..smiling ------------------ 91 LX Convertible Gray on Red B&M Shift improver kit,ASP red alum. underdrive pulleys, Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip,GT40 P heads, looking at new exhaust, Lentech Street Terminator plus.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nitrous in a stock 2000 GT	Chris2000GTvert	Modular Madness	6	10-18-2002 09:10 AM
How would neon look on a 2002 Mustang GT?	XDude	Appearance & Detailing	10	05-19-2002 01:31 AM
97 gt stock seats	southernstang97	Modular Madness	2	03-31-2002 10:22 AM
Help!! Need 2000 Mustang GT Stock Rims, QUICK	GTGrl00	Blue Oval Lounge	5	07-27-2001 09:22 PM
How Much Should A Stock 88 5.0 GT Weigh?	BowTie Eater 5 Liter	Windsor Power	3	05-29-2001 09:53 PM

03-31-2001, 10:13 AM	#2
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	That could actually be a close run. if the neon is 15 flat he races it and might have a decent tire...or sprays it and will have traction out of the hole. The stang will spin but should still be good for high 14's to mid-15's depending on the driver. w/ a tire on the stang.....no problem. Of course...was that 15.0 on a slick...now the neon is on street tires??? ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.webprovider.com